Short answer: the 1MORE Triple Driver, though neither ranks well in its class. It ranks #63 of 68 in-ear headphones by sound quality, rated 2.6/5, at $69.99; the BASN Bmaster ranks #65, rated 2.0/5, and costs $91.99, so there is not much of a tradeoff to weigh. Both are rated below 3.0/5 among the 68 in-ear headphones, so if sound quality matters, consider the Truthear x Crinacle Zero RED instead, ranked #3 at $64.99.
The 1MORE Triple Driver is the better-sounding pick. A hybrid design with 1 dynamic and 2 balanced armature drivers, plus a built-in microphone for calls. The catch: A preference score of 57 and a 3.28 dB deviation from the target put the tonal balance among the weaker in its class.
What the BASN Bmaster does well: The hybrid driver setup pairs two dynamic drivers with a balanced armature, and the wired connection means no battery or pairing to manage. The catch: Presence from 3 to 6 kHz runs about 8.8 dB under target, with a 9.5 dB dip near 4 kHz, so vocals and guitars lose bite and sound recessed.
Buy the 1MORE Triple Driver. It is rated higher for sound quality than the BASN Bmaster and costs less, which makes it the one to get unless you need something the other one does better.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| 1MORE Triple Driver | BASN Bmaster | |
|---|---|---|
| Price | $69.99 | $91.99 |
| Ranked | #63 of 68 in In-Ear Headphones | #65 of 68 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 57 (measured by crinacle, via AutoEQ) | 49 (measured by HypetheSonics, via AutoEQ) |
| Deviation From Target | 3.28 dB standard deviation | 3.69 dB standard deviation |
| Tonal Tilt | -0.81 (negative is warmer, positive brighter) | -1.43 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) | Hybrid (2 dynamic + 1 balanced armature) |
| Drivers | 1 x dynamic + 2 x balanced armature | 2 x dynamic + 1 x balanced armature |
| Impedance | 32 ohms | - |
| Sensitivity | 99 dB | - |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) | - |
| Built-in Microphone | Yes | - |
| Back | Closed | Closed |
Related Headphone Comparisons
How 1MORE Triple Driver compares with other leading options:
- Sennheiser CX 3.00 vs 1MORE Triple Driver
- 1MORE Triple Driver vs Final Audio E3000
- BASN Bmaster vs 1MORE Quad Driver
- KZ AS10 vs Final Audio E3000
- Jabra Elite Active 65t vs 1MORE Quad Driver
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
1MORE Triple Driver: $69.99 Amazon eBay
Pros: A hybrid design with 1 dynamic and 2 balanced armature drivers, plus a built-in microphone for calls. It was released in 2017 and the 32 ohm impedance suits a phone or portable player. Crinacle measured a mild warm tilt of about 0.8 dB.
Cons: A preference score of 57 and a 3.28 dB deviation from the target put the tonal balance among the weaker in its class. Sensitivity of 99 dB is on the low side, so it needs more volume than most earphones. The KZ AS10 and Sennheiser CX 3.00 are rated higher, and the Shure SE215 is higher still.
Full 1MORE Triple Driver review and specifications →
| Released | Mar 2017 (9 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | Yes |
| Connection | Wired |
| Deviation From Target | 3.28 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 57 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 99 dB |
| Tonal Tilt | -0.81 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +8.5 dB | 0.70 |
| Peak | 57 Hz | -8.9 dB | 0.25 |
| Peak | 9,119 Hz | +6.0 dB | 0.81 |
| Peak | 830 Hz | +3.7 dB | 1.07 |
| Peak | 4,495 Hz | -5.7 dB | 5.76 |
| High shelf | 10,000 Hz | -5.3 dB | 0.70 |
| Peak | 5,986 Hz | +3.0 dB | 5.26 |
| Peak | 2,527 Hz | -1.3 dB | 3.64 |
| Peak | 6,792 Hz | -1.1 dB | 6.00 |
| Peak | 440 Hz | +0.2 dB | 2.11 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
BASN Bmaster: $91.99 Amazon eBay
Pros: The hybrid driver setup pairs two dynamic drivers with a balanced armature, and the wired connection means no battery or pairing to manage. In HypetheSonics’ measurement bass sits about 2.6 dB above the Harman target and sub-bass is close to target, so the tuning suits listeners who want a warm, bass-forward sound. It also rates higher than the 1MORE Quad Driver at a lower price.
Cons: Presence from 3 to 6 kHz runs about 8.8 dB under target, with a 9.5 dB dip near 4 kHz, so vocals and guitars lose bite and sound recessed. Treble and air are also down by roughly 3.7 dB and 8.1 dB, which leaves cymbals dull and the overall sound closed in. The preference score of 49 is well below what most listeners prefer.
Full BASN Bmaster review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 3.69 dB standard deviation |
| Driver Type | Hybrid (2 dynamic + 1 balanced armature) |
| Drivers | 2 x dynamic + 1 x balanced armature |
| Form Factor | In-ear |
| Harman Preference Score | 49 (measured by HypetheSonics, via AutoEQ) |
| Tonal Tilt | -1.43 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -2.6 dB | 0.70 |
| Peak | 3,536 Hz | +6.0 dB | 0.95 |
| Peak | 178 Hz | -4.1 dB | 0.82 |
| Peak | 1,707 Hz | -5.4 dB | 1.07 |
| Peak | 4,911 Hz | +1.8 dB | 0.18 |
| High shelf | 10,000 Hz | +1.5 dB | 0.70 |
| Peak | 7,135 Hz | -3.6 dB | 5.21 |
| Peak | 9,859 Hz | +2.0 dB | 2.95 |
| Peak | 5,469 Hz | +1.4 dB | 4.91 |
| Peak | 62 Hz | +0.4 dB | 2.03 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons