Short answer: a tie on sound quality. Both are rated 3.2/5 (#159 and #152 of 216 over-ear headphones) at nearly the same price ($164.28 vs $164.99), so choose on features and fit.
The case for the 1MORE Triple Driver Over Ear: Mids from 200 Hz to 6 kHz sit within about 1.4 dB of the Harman target in oratory1990’s measurement, so vocals and guitars keep a natural balance. The tradeoff: A deep 10.5 dB dip near 10 kHz takes the shimmer off cymbals and hi-hats, and treble from 6 to 10 kHz sits about 2.4 dB under target, so the top end sounds dull.
The case for the FiiO FT1: Sub-bass and bass both sit about 2.6 dB above target, so kick drums and bass lines have noticeable punch and rumble without bloating the midrange, which stays within a third of a dB of target. The catch: Treble from 6 to 10 kHz is about 5 dB low with a 8.7 dB dip near 9.5 kHz, which dulls cymbals and takes the edge off sibilance.
Buy the 1MORE Triple Driver Over Ear or the FiiO FT1 on features: they are rated the same for sound quality at close to the same price.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| 1MORE Triple Driver Over Ear | FiiO FT1 | |
|---|---|---|
| Price | $164.28 | $164.99 |
| Ranked | #159 of 216 in Over-Ear Headphones | #152 of 216 in Over-Ear Headphones |
| Form Factor | Over-ear | Over-ear |
| Harman Preference Score | 63 (measured by oratory1990, via AutoEQ) | 64 (measured by oratory1990, via AutoEQ) |
| Deviation From Target | 2.65 dB standard deviation | 2.56 dB standard deviation |
| Tonal Tilt | -1.14 (negative is warmer, positive brighter) | -1.20 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+3.4 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+3.4 dB at 30 Hz) |
| Connection | Wired | Wired |
| Back | Closed | Closed |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 40mm dynamic + ceramic tweeter | 1 x 60mm dynamic |
| Impedance | 32 ohms | 32 ohms |
| Sensitivity | 104 dB | 98 dB/mW |
| Weight | 0.6 lbs (293 g) | 0.7 lbs (340 g) |
| Frequency Response | 20Hz - 40kHz | 10Hz - 40kHz (Manufacturer specified) |
Related Headphone Comparisons
How FiiO FT1 compares with other leading options:
- Shure SRH840A vs FiiO FT1
- FiiO FT1 vs Yamaha HPH-200
- Audio-Technica ATH-AD700X vs FiiO FT1
- FiiO FT1 vs Fostex T40RP Mk3
- 1MORE Triple Driver Over Ear vs Yamaha HPH-200
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
1MORE Triple Driver Over Ear: $164.28 Amazon eBay
Pros: Mids from 200 Hz to 6 kHz sit within about 1.4 dB of the Harman target in oratory1990’s measurement, so vocals and guitars keep a natural balance. Bass runs about 3 dB above target from the sub-bass through the upper bass, adding warmth and punch that suits pop and hip hop. At 32 ohms and 104 dB sensitivity it plays loudly straight from a phone or laptop, and the closed back keeps a fair amount of outside noise out.
Cons: A deep 10.5 dB dip near 10 kHz takes the shimmer off cymbals and hi-hats, and treble from 6 to 10 kHz sits about 2.4 dB under target, so the top end sounds dull. The extra bass can bleed into the lower mids on bass-heavy tracks. It is wired only and has no microphone listed, so it cannot be used for calls or wireless listening.
Full 1MORE Triple Driver Over Ear review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.65 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 40mm dynamic + ceramic tweeter |
| Form Factor | Over-ear |
| Frequency Response | 20Hz - 40kHz |
| Harman Preference Score | 63 (measured by oratory1990, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 104 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+3.4 dB at 30 Hz) |
| Tonal Tilt | -1.14 (negative is warmer, positive brighter) |
| Weight | 0.6 lbs (293 g) |
EQ preset to match the Harman target
Set a preamp of -2.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -2.4 dB | 0.70 |
| Peak | 319 Hz | -4.4 dB | 0.18 |
| Peak | 343 Hz | +7.2 dB | 1.09 |
| Peak | 8,715 Hz | +2.8 dB | 3.19 |
| Peak | 1,974 Hz | +4.1 dB | 1.17 |
| High shelf | 10,000 Hz | -0.3 dB | 0.70 |
| Peak | 6,063 Hz | -2.6 dB | 4.91 |
| Peak | 47 Hz | -0.4 dB | 1.53 |
| Peak | 7,478 Hz | +1.4 dB | 6.00 |
| Peak | 80 Hz | +0.7 dB | 3.32 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
FiiO FT1: $164.99 Amazon AliExpress eBay
Pros: Sub-bass and bass both sit about 2.6 dB above target, so kick drums and bass lines have noticeable punch and rumble without bloating the midrange, which stays within a third of a dB of target. The 32 ohm, 98 dB/mW closed-back design runs directly from a phone or laptop, with a smoother response than most at 2.56 dB deviation.
Cons: Treble from 6 to 10 kHz is about 5 dB low with a 8.7 dB dip near 9.5 kHz, which dulls cymbals and takes the edge off sibilance. A 3.7 dB peak near 5.2 kHz and air about 3 dB high make the top end uneven. At 340 g it is on the heavier side.
Full FiiO FT1 review and specifications →
| Released | Sep 2024 (2 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.56 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 60mm dynamic |
| Form Factor | Over-ear |
| Frequency Response | 10Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 64 (measured by oratory1990, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 98 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+3.4 dB at 30 Hz) |
| Tonal Tilt | -1.20 (negative is warmer, positive brighter) |
| Weight | 0.7 lbs (340 g) |
EQ preset to match the Harman target
Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -2.7 dB | 0.70 |
| Peak | 155 Hz | -3.4 dB | 1.47 |
| Peak | 7,882 Hz | +4.5 dB | 1.99 |
| Peak | 3,835 Hz | +4.6 dB | 3.54 |
| Peak | 5,303 Hz | -5.6 dB | 4.56 |
| High shelf | 10,000 Hz | -3.1 dB | 0.70 |
| Peak | 1,735 Hz | -1.9 dB | 3.24 |
| Peak | 61 Hz | +0.9 dB | 2.22 |
| Peak | 579 Hz | +0.8 dB | 1.78 |
| Peak | 239 Hz | -0.5 dB | 2.59 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons