ZiSin 340 Review: Ranked #1014 of 1369

Last updated: October 17, 2026

The ZiSin 340 ranks #1014 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#1014 ZiSin 340: $58.00 AliExpress $58.00 eBay

Pros: About 3 dB more bass than the Harman target below 150 Hz, for listeners who want a fuller low end.

Cons: An uneven response, 2.5 dB standard deviation from target.

Is the ZiSin 340 right for you?

Buy it if

  • you like extra bass (about +3 dB below 150 Hz versus the target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 28 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $34 less.
BackClosed
ConnectionWired
Deviation From Target2.54 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic driver (dual-cavity gold-plated composite film)
Form FactorIn-ear
Frequency Response10Hz - 26kHz
Harman Preference Score63 (median of 4 squig.link measurements, calibrated to AutoEQ)
Impedance32 ohms
Sensitivity123 dB/Vrms
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+1.2 dB at 30 Hz)
Tonal Tilt-0.90 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 63.

FilterFrequencyGainQ
Low shelf105 Hz-2.3 dB0.70
High shelf10,000 Hz-5.6 dB0.70
Peak23 Hz+1.6 dB1.66
Peak174 Hz-5.3 dB0.77
Peak785 Hz+2.1 dB2.87
Peak1,471 Hz-1.4 dB2.88
Peak5,769 Hz+5.4 dB2.76

Neutral target

Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 94 out of 100, up from 26.

FilterFrequencyGainQ
Low shelf105 Hz-10.8 dB0.70
High shelf10,000 Hz-5.6 dB0.70
Peak79 Hz-1.1 dB2.24
Peak174 Hz-5.1 dB0.68
Peak766 Hz+2.1 dB2.50
Peak1,471 Hz-1.4 dB2.92
Peak5,769 Hz+5.4 dB2.76

Studio flat target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 7.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
Peak165 Hz-7.3 dB0.74
Peak793 Hz+1.8 dB3.55
Peak1,435 Hz-1.7 dB3.54
Peak2,836 Hz+1.6 dB4.38
Peak5,345 Hz+2.1 dB0.41

Warm target

Set a preamp of -3.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz-2.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+1.6 dB1.83
Peak84 Hz-0.9 dB2.08
Peak174 Hz-5.1 dB0.78
Peak777 Hz+2.3 dB2.86
Peak963 Hz+1.3 dB6.00
Peak1,779 Hz-1.6 dB1.42
Peak5,915 Hz+3.9 dB5.81

Bass target

Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 93 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz+1.5 dB0.70
High shelf10,000 Hz-5.7 dB0.70
Peak23 Hz+1.8 dB1.46
Peak174 Hz-5.2 dB0.79
Peak789 Hz+2.0 dB2.99
Peak1,471 Hz-1.4 dB2.86
Peak5,771 Hz+5.4 dB2.76

Bright target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 88 out of 100, up from 15.

FilterFrequencyGainQ
Low shelf105 Hz-10.8 dB0.70
High shelf10,000 Hz-1.7 dB0.70
Peak78 Hz-1.1 dB2.21
Peak174 Hz-5.2 dB0.67
Peak763 Hz+2.1 dB2.53
Peak1,470 Hz-1.5 dB3.01
Peak3,303 Hz+1.3 dB5.12
Peak5,345 Hz+6.0 dB1.78

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 85 out of 100, up from 63.

FilterFrequencyGainQ
Low shelf105 Hz+2.2 dB0.70
Peak23 Hz+1.7 dB1.76
Peak174 Hz-3.9 dB0.80
Peak749 Hz+1.5 dB2.00
Peak1,403 Hz-1.6 dB4.61
Peak3,240 Hz+1.5 dB4.38
Peak5,345 Hz+5.9 dB1.53

Frequency Response

How the ZiSin 340 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

ZiSin 340Harman target
Measured frequency response of the ZiSin 340-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of audioamigo, ducbloke, jaytiss and soundcheck39. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

4 comparisons