The Yanyin Carmen ranks #1051 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Yanyin
Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#1051 Yanyin Carmen: $849 Linsoul $849 eBay
Pros: A published AutoEQ preset corrects its response toward the Harman target, so a few minutes of EQ setup closes most of the gap.
Cons: Treble about 7 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.8 dB standard deviation from target.
Is the Yanyin Carmen right for you?
Buy it if
- you are sensitive to bright or sharp treble (treble sits 6.7 dB below target).
- you are happy to use EQ: our preset lifts its Harman match by about 18 points.
Skip it if
- you want the best value: the higher-rated EPZ G10 costs about $825 less.
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.84 dB standard deviation |
| Driver Type | Balanced Armature |
| Drivers | 10 balanced armature drivers (4 Sonion low + 2 Sonion mid + 2 Sonion high + 2 custom ultra-high) |
| Form Factor | In-ear |
| Frequency Response | 5Hz - 25kHz |
| Harman Preference Score | 63 (median of 3 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 10 ohms |
| Sensitivity | 109 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.9 dB at 30 Hz) |
| Tonal Tilt | -0.82 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 81 out of 100, up from 63.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.4 dB | 0.70 |
| High shelf | 10,000 Hz | +1.2 dB | 0.70 |
| Peak | 330 Hz | +0.8 dB | 0.71 |
| Peak | 1,547 Hz | -3.0 dB | 2.72 |
| Peak | 2,699 Hz | +1.5 dB | 6.00 |
| Peak | 3,573 Hz | +6.0 dB | 1.00 |
| Peak | 5,553 Hz | +3.4 dB | 4.78 |
Neutral target
Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 82 out of 100, up from 30.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -7.1 dB | 0.70 |
| High shelf | 10,000 Hz | +1.2 dB | 0.70 |
| Peak | 48 Hz | -0.8 dB | 1.09 |
| Peak | 343 Hz | +0.8 dB | 0.89 |
| Peak | 1,548 Hz | -3.0 dB | 2.72 |
| Peak | 2,699 Hz | +1.5 dB | 6.00 |
| Peak | 3,573 Hz | +6.0 dB | 1.00 |
| Peak | 5,553 Hz | +3.4 dB | 4.78 |
Studio flat target
Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 78 out of 100, up from 11.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -9.7 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 135 Hz | -1.4 dB | 0.65 |
| Peak | 1,549 Hz | -3.5 dB | 2.17 |
| Peak | 2,773 Hz | +6.0 dB | 1.05 |
| Peak | 5,345 Hz | +4.7 dB | 2.96 |
Warm target
Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 87 out of 100, up from 74.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.7 dB | 0.70 |
| High shelf | 10,000 Hz | -1.5 dB | 0.70 |
| Peak | 1,563 Hz | -2.8 dB | 3.21 |
| Peak | 2,915 Hz | +2.8 dB | 4.35 |
| Peak | 5,345 Hz | +5.2 dB | 0.83 |
| Peak | 7,243 Hz | -3.0 dB | 5.44 |
Bass target
Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 82 out of 100, up from 65.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.2 dB | 0.70 |
| High shelf | 10,000 Hz | +1.2 dB | 0.70 |
| Peak | 316 Hz | +0.8 dB | 0.64 |
| Peak | 1,547 Hz | -3.0 dB | 2.71 |
| Peak | 2,699 Hz | +1.5 dB | 6.00 |
| Peak | 3,573 Hz | +6.0 dB | 1.00 |
| Peak | 5,553 Hz | +3.4 dB | 4.78 |
Bright target
Set a preamp of -6.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 67 out of 100, up from 16.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -7.2 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 1,581 Hz | -3.4 dB | 2.34 |
| Peak | 3,148 Hz | +6.0 dB | 1.02 |
| Peak | 5,365 Hz | +4.0 dB | 3.21 |
V-shaped target
Set a preamp of -6.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 64 out of 100, up from 50.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.7 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 206 Hz | +2.0 dB | 0.64 |
| Peak | 1,147 Hz | -1.0 dB | 5.17 |
| Peak | 1,545 Hz | -3.7 dB | 2.21 |
| Peak | 2,954 Hz | +6.0 dB | 1.01 |
| Peak | 4,118 Hz | +1.1 dB | 5.02 |
| Peak | 5,345 Hz | +4.3 dB | 2.93 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the Yanyin Carmen measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 3 measurements from the squig.link databases of jaytiss, soundcheck39 and yanyin. Thanks to each of them for publishing their work.
Head-to-Head Comparisons
3 comparisons- Yanyin Carmen vs Softears RSV MKII
- Yanyin Carmen vs InEar StageDiver SD5
- Yanyin Carmen vs ThieAudio Origin
No comparisons match that search.
