Whizzer Kylin HE10 Review: Ranked #142 of 1118

Last updated: October 17, 2026

The Whizzer Kylin HE10 ranks #142 out of 1118 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Whizzer

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Whizzer Kylin HE10 - ranked #142 of 1118 In-Ear Headphones · Editor's rating 4.4/5

#142 Whizzer Kylin HE10: $175 eBay

Pros: A broadly balanced tuning with a preference score of 79 against the Harman target.

Cons: The rating reflects sound quality only; comfort, build and noise isolation are not part of the score.

Is the Whizzer Kylin HE10 right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 79).
  • your taste runs warm: it scores 83 for that sound.
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $151 less.
BackClosed
ConnectionWired
Deviation From Target1.37 dB standard deviation
Driver TypeDynamic
Drivers1 x 10.2mm dynamic
Form FactorIn-ear
Harman Preference Score79 (median of 6 squig.link measurements, calibrated to AutoEQ)
Impedance36 ohms
Sensitivity105 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+1.5 dB at 30 Hz)
Tonal Tilt-0.43 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 79.

FilterFrequencyGainQ
Low shelf105 Hz-1.6 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak178 Hz-2.9 dB0.94
Peak6,541 Hz+3.2 dB3.81

Neutral target

Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 93 out of 100, up from 39.

FilterFrequencyGainQ
Low shelf105 Hz-10.1 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak161 Hz-2.8 dB0.74
Peak6,542 Hz+3.2 dB3.80

Studio flat target

Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 92 out of 100, up from 21.

FilterFrequencyGainQ
Low shelf105 Hz-11.8 dB0.70
Peak167 Hz-4.8 dB0.73
Peak734 Hz+1.2 dB3.06
Peak1,369 Hz-1.0 dB3.90
Peak2,836 Hz+2.6 dB1.97
Peak4,955 Hz-1.9 dB6.00
Peak6,753 Hz+1.9 dB5.60

Warm target

Set a preamp of -1.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 83.

FilterFrequencyGainQ
Low shelf105 Hz-1.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak173 Hz-2.7 dB1.06
Peak754 Hz+1.6 dB2.36
Peak4,419 Hz-1.3 dB0.40
Peak6,371 Hz+1.8 dB6.00

Bass target

Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 93 out of 100, up from 80.

FilterFrequencyGainQ
Low shelf105 Hz+2.2 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak182 Hz-2.9 dB1.00
Peak6,541 Hz+3.2 dB3.81

Bright target

Set a preamp of -3.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 90 out of 100, up from 30.

FilterFrequencyGainQ
Low shelf105 Hz-10.2 dB0.70
High shelf10,000 Hz-2.5 dB0.70
Peak164 Hz-2.8 dB0.74
Peak736 Hz+1.2 dB2.32
Peak1,450 Hz-1.1 dB3.76
Peak5,757 Hz+3.7 dB1.22

V-shaped target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 88 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz+2.8 dB0.70
High shelf10,000 Hz-1.1 dB0.70
Peak171 Hz-1.6 dB1.28
Peak1,345 Hz-1.5 dB3.80
Peak5,364 Hz+3.9 dB1.08

Frequency Response

How the Whizzer Kylin HE10 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 6 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Whizzer Kylin HE10Harman target
Measured frequency response of the Whizzer Kylin HE10-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 6 measurements from the squig.link databases of arn, hu-fi, ianfann, mmagtech, musicafe and practiphile. Thanks to each of them for publishing their work.

More Whizzer headphones →