Unique Melody Stardust Review: Ranked #503 of 1061

Last updated: October 15, 2026

The Unique Melody Stardust ranks #503 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Unique Melody

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#503 Unique Melody Stardust: $799.00 HiFiGo $799.00 eBay

Pros: A six driver hybrid with two dynamic drivers and four balanced armatures in a 3D printed titanium shell. Measurements show bass right on the Harman target and full sub-bass to 20 Hz (score 71 across seven measurements).

Cons: Treble sits about 4.3 dB below target, a dark, relaxed balance. Expensive for its rating.

Is the Unique Melody Stardust right for you?

Buy it if

  • your taste runs warm: it scores 82 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 4.3 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 19 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $775 less.
Released2026 (this year)
BackClosed
ConnectionWired
Deviation From Target2.08 dB standard deviation
Driver TypeHybrid
Drivers2 x dynamic + 4 x balanced armature
Form FactorIn-ear
Harman Preference Score71 (median of 7 squig.link measurements, calibrated to AutoEQ)
Sensitivity106 dB @1kHz
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.4 dB at 30 Hz)
Tonal Tilt-0.57 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz+1.0 dB0.70
Peak2,930 Hz+1.3 dB4.27
Peak3,893 Hz+6.0 dB1.05

Neutral target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 91 out of 100, up from 38.

FilterFrequencyGainQ
Low shelf105 Hz-7.5 dB0.70
Peak1,096 Hz-1.0 dB1.15
Peak3,573 Hz+6.0 dB1.08
Peak4,682 Hz+1.4 dB4.86

Studio flat target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 87 out of 100, up from 18.

FilterFrequencyGainQ
Low shelf105 Hz-10.1 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak182 Hz-2.0 dB0.40
Peak1,313 Hz-1.4 dB1.79
Peak2,773 Hz+6.0 dB1.11
Peak4,246 Hz+3.3 dB4.02

Warm target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 96 out of 100, up from 82.

FilterFrequencyGainQ
Low shelf105 Hz+1.3 dB0.70
High shelf10,000 Hz-3.4 dB0.70
Peak1,266 Hz-1.0 dB4.06
Peak3,610 Hz+6.0 dB1.71
Peak4,354 Hz+1.1 dB5.24
Peak6,585 Hz-1.5 dB4.11

Bass target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+4.8 dB0.70
Peak2,931 Hz+1.3 dB4.27
Peak3,893 Hz+6.0 dB1.05

Bright target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 82 out of 100, up from 26.

FilterFrequencyGainQ
Low shelf105 Hz-7.5 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak29 Hz-0.6 dB0.40
Peak1,183 Hz-1.4 dB0.90
Peak3,354 Hz+6.0 dB0.92
Peak5,352 Hz+3.1 dB3.95

V-shaped target

Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 78 out of 100, up from 60.

FilterFrequencyGainQ
Low shelf105 Hz+5.5 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak189 Hz+0.9 dB0.58
Peak1,244 Hz-2.1 dB1.53
Peak3,148 Hz+6.0 dB0.88
Peak5,380 Hz+3.5 dB3.48

Frequency Response

How the Unique Melody Stardust measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 7 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Unique Melody StardustHarman target
Measured frequency response of the Unique Melody Stardust-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 7 measurements from the squig.link databases of atechreviews, elrics, jaytiss, silicagel, sl0the, tonedeafmonk and zerostresslevel. Thanks to each of them for publishing their work.

More Unique Melody headphones →