Tripowin Mele Review: Ranked #955 of 1369

Last updated: October 17, 2026

The Tripowin Mele ranks #955 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Tripowin

Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Tripowin Mele - ranked #955 of 1369 In-Ear Headphones · Editor's rating 3.3/5

#955 Tripowin Mele: 9.00 Discontinued eBay

Newer model: the Tripowin Olina, ranked higher, rated 4.8/5, released Jan 2022 (also discontinued). See every Tripowin generation.

Pros: A broadly balanced tuning with a preference score of 65 against the Harman target.

Cons: Treble about 2 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.3 dB standard deviation from target. Discontinued.

Is the Tripowin Mele right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 2.0 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 22 points.

Skip it if

  • you want to buy it new: it is discontinued.
BackClosed
ConnectionWired
Deviation From Target2.29 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm graphene dynamic driver
Form FactorIn-ear
Frequency Response10Hz - 34kHz
Harman Preference Score65 (median of 5 squig.link measurements, calibrated to AutoEQ)
Impedance16 ohms
Sensitivity109 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+2.0 dB at 30 Hz)
Tonal Tilt-0.99 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -2.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 65.

FilterFrequencyGainQ
Low shelf105 Hz-2.5 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak198 Hz-4.0 dB0.83
Peak5,016 Hz+2.6 dB1.20

Neutral target

Set a preamp of -2.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 26.

FilterFrequencyGainQ
Low shelf105 Hz-11.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak198 Hz-3.8 dB0.71
Peak5,016 Hz+2.6 dB1.18

Studio flat target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 85 out of 100, up from 6.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak163 Hz-6.0 dB0.71
Peak742 Hz+1.2 dB3.06
Peak1,614 Hz-1.0 dB3.52
Peak3,129 Hz+3.8 dB1.60
Peak6,176 Hz+1.6 dB5.56

Warm target

Set a preamp of -1.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 93 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz-2.3 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak106 Hz-1.0 dB2.29
Peak198 Hz-3.7 dB0.87
Peak713 Hz+1.6 dB2.20
Peak1,785 Hz-1.5 dB2.60
Peak3,509 Hz+1.0 dB5.47
Peak5,845 Hz+1.6 dB5.96
Peak7,667 Hz-2.5 dB6.00

Bass target

Set a preamp of -2.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz+1.3 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak198 Hz-4.0 dB0.87
Peak5,016 Hz+2.6 dB1.21

Bright target

Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 83 out of 100, up from 14.

FilterFrequencyGainQ
Low shelf105 Hz-11.1 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak198 Hz-3.8 dB0.69
Peak5,016 Hz+5.4 dB1.36

V-shaped target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 81 out of 100, up from 64.

FilterFrequencyGainQ
Low shelf105 Hz+1.9 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak198 Hz-2.6 dB0.91
Peak4,708 Hz+5.8 dB1.28

Frequency Response

How the Tripowin Mele measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 5 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Tripowin MeleHarman target
Measured frequency response of the Tripowin Mele-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 5 measurements from the squig.link databases of bassyalexander, hadoe, harpo, ianfann and nymz. Thanks to each of them for publishing their work.

More Tripowin headphones →