Tekkusai Lucid Review: Ranked #741 of 1253

Last updated: October 16, 2026

The Tekkusai Lucid ranks #741 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#741 Tekkusai Lucid: $129 Amazon $129 eBay

Pros: A broadly balanced tuning with a preference score of 69 against the Harman target.

Cons: Treble about 2 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 1.9 dB standard deviation from target.

Is the Tekkusai Lucid right for you?

Buy it if

  • your taste runs bass-heavy: it scores 81 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 2.4 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 22 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $105 less.
BackClosed
ConnectionWired (3.5mm)
Deviation From Target1.95 dB standard deviation
Driver TypeHybrid
Drivers1 Dynamic, 2 Balanced Armature
Form FactorIn-ear
Harman Preference Score69 (median of 4 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+2.3 dB at 30 Hz)
Tonal Tilt-0.92 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 92 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz-2.2 dB0.70
High shelf10,000 Hz-1.3 dB0.70
Peak159 Hz-2.9 dB0.93
Peak634 Hz+1.2 dB2.00
Peak1,577 Hz-1.1 dB2.25
Peak3,537 Hz+1.6 dB6.00
Peak6,170 Hz+2.4 dB0.83

Neutral target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 93 out of 100, up from 28.

FilterFrequencyGainQ
Low shelf105 Hz-10.7 dB0.70
High shelf10,000 Hz-1.3 dB0.70
Peak140 Hz-2.8 dB0.71
Peak626 Hz+1.2 dB1.94
Peak1,581 Hz-1.1 dB2.30
Peak3,536 Hz+1.6 dB6.00
Peak6,165 Hz+2.4 dB0.82

Studio flat target

Set a preamp of -3.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 85 out of 100, up from 9.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak152 Hz-5.0 dB0.76
Peak648 Hz+1.1 dB2.94
Peak1,363 Hz-1.0 dB3.41
Peak3,153 Hz+3.7 dB1.89
Peak4,860 Hz-1.3 dB6.00
Peak7,060 Hz+1.7 dB4.06

Warm target

Set a preamp of -1.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 94 out of 100, up from 80.

FilterFrequencyGainQ
Low shelf105 Hz-2.0 dB0.70
High shelf10,000 Hz-4.9 dB0.70
Peak155 Hz-2.7 dB1.00
Peak633 Hz+1.4 dB2.06
Peak2,201 Hz-1.3 dB2.02
Peak3,523 Hz+1.4 dB6.00
Peak6,991 Hz+1.3 dB3.66

Bass target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 93 out of 100, up from 81.

FilterFrequencyGainQ
Low shelf105 Hz+1.6 dB0.70
High shelf10,000 Hz-1.3 dB0.70
Peak164 Hz-2.9 dB0.98
Peak636 Hz+1.1 dB2.00
Peak1,568 Hz-1.1 dB2.27
Peak3,537 Hz+1.6 dB6.00
Peak6,174 Hz+2.4 dB0.83

Bright target

Set a preamp of -4.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 84 out of 100, up from 16.

FilterFrequencyGainQ
Low shelf105 Hz-10.8 dB0.70
High shelf10,000 Hz+1.6 dB0.70
Peak142 Hz-2.8 dB0.72
Peak624 Hz+1.2 dB1.96
Peak1,529 Hz-1.2 dB2.56
Peak3,539 Hz+2.1 dB5.99
Peak5,345 Hz+4.7 dB1.17
Peak6,825 Hz-1.7 dB6.00

V-shaped target

Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 77 out of 100, up from 67.

FilterFrequencyGainQ
Low shelf105 Hz+2.2 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak5,016 Hz+5.3 dB1.19

Frequency Response

How the Tekkusai Lucid measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Tekkusai LucidHarman target
Measured frequency response of the Tekkusai Lucid-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of audioamigo, flare, gadgetrytech and jaytiss. Thanks to each of them for publishing their work.