TRN VX Review: Ranked #615 of 1061

Last updated: October 15, 2026

The TRN VX ranks #615 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: TRN

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#615 TRN VX: $72.99 Shenzhenaudio $72.99 eBay

Pros: A budget hybrid with one dynamic driver and six balanced armatures. Measurements show treble right on the Harman target (score 68 across six measurements).

Cons: Bass sits about 2.2 dB below target, so it sounds lean. A 2.38 dB spread from the target shows peaks and dips that better tuned sets avoid.

Is the TRN VX right for you?

Buy it if

  • you are happy to use EQ: our preset lifts its Harman match by about 18 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $49 less.
BackClosed
ConnectionWired
Deviation From Target2.38 dB standard deviation
Driver TypeHybrid
Drivers1 x 10mm dynamic + 6 x balanced armature
Form FactorIn-ear
Harman Preference Score68 (median of 6 squig.link measurements, calibrated to AutoEQ)
Impedance22 ohms
Sensitivity107 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-2.3 dB at 30 Hz)
Tonal Tilt+0.52 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 86 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+3.1 dB0.70
High shelf10,000 Hz-1.7 dB0.70
Peak583 Hz+2.5 dB1.72
Peak1,749 Hz-3.7 dB3.23
Peak2,964 Hz+4.3 dB5.96
Peak5,152 Hz+4.5 dB2.51
Peak6,013 Hz+1.6 dB6.00
Peak7,675 Hz-4.5 dB6.00

Neutral target

Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 53.

FilterFrequencyGainQ
Low shelf105 Hz-5.4 dB0.70
High shelf10,000 Hz-1.7 dB0.70
Peak584 Hz+2.5 dB1.74
Peak1,749 Hz-3.7 dB3.23
Peak2,964 Hz+4.3 dB5.96
Peak5,151 Hz+4.5 dB2.51
Peak7,675 Hz-4.5 dB6.00

Studio flat target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 92 out of 100, up from 39.

FilterFrequencyGainQ
Low shelf105 Hz-8.0 dB0.70
High shelf10,000 Hz+1.2 dB0.70
Peak144 Hz-3.2 dB1.05
Peak611 Hz+2.2 dB1.92
Peak1,700 Hz-3.3 dB3.54
Peak2,562 Hz+1.7 dB6.00
Peak2,964 Hz+6.0 dB3.10
Peak5,543 Hz+3.1 dB4.07
Peak7,734 Hz-3.2 dB6.00

Warm target

Set a preamp of -3.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 87 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+3.4 dB0.70
High shelf10,000 Hz-5.3 dB0.70
Peak104 Hz-1.4 dB1.21
Peak574 Hz+2.8 dB1.64
Peak1,398 Hz-1.2 dB3.16
Peak1,757 Hz-4.2 dB3.77
Peak2,953 Hz+3.4 dB4.74
Peak5,536 Hz+3.1 dB4.65
Peak7,658 Hz-5.6 dB6.00

Bass target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 85 out of 100, up from 55.

FilterFrequencyGainQ
Low shelf105 Hz+5.8 dB0.70
High shelf10,000 Hz-1.7 dB0.70
Peak580 Hz+2.5 dB1.66
Peak1,749 Hz-3.7 dB3.23
Peak2,964 Hz+4.3 dB5.96
Peak5,152 Hz+4.5 dB2.52
Peak6,014 Hz+1.6 dB6.00
Peak7,675 Hz-4.5 dB6.00

Bright target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 81 out of 100, up from 46.

FilterFrequencyGainQ
Low shelf105 Hz-5.4 dB0.70
High shelf10,000 Hz+1.0 dB0.70
Peak1,752 Hz-3.9 dB3.00
Peak2,944 Hz+3.5 dB6.00
Peak4,833 Hz+6.0 dB1.51
Peak8,000 Hz-2.9 dB5.99

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 82 out of 100, up from 58.

FilterFrequencyGainQ
Low shelf105 Hz+5.9 dB0.70
High shelf10,000 Hz+1.6 dB0.70
Peak452 Hz+2.6 dB1.08
Peak1,685 Hz-3.8 dB3.43
Peak2,892 Hz+4.1 dB5.91
Peak4,648 Hz+6.0 dB1.27

Frequency Response

How the TRN VX measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 6 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

TRN VXHarman target
Measured frequency response of the TRN VX-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 6 measurements from the squig.link databases of bedrock, bryaudioreviews, eplv, melatonin, musicafe and pw. Thanks to each of them for publishing their work.

More TRN headphones →