TRN V10 PRO Review: Ranked #1006 of 1369

Last updated: October 17, 2026

The TRN V10 PRO ranks #1006 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: TRN

Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#1006 TRN V10 PRO: $14.99 Shenzhenaudio $14.99 eBay

Pros: A published AutoEQ preset corrects its response toward the Harman target, so a few minutes of EQ setup closes most of the gap.

Cons: Treble about 3 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.6 dB standard deviation from target.

Is the TRN V10 PRO right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 2.6 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 20 points.

Skip it if

  • you want the best value: the higher-rated KZ EDX Pro 2 costs about $3 less.
BackClosed
ConnectionWired
Deviation From Target2.64 dB standard deviation
Driver TypeHybrid
Drivers2 DD + 2 BA (1 x 10mm beryllium-plated dynamic driver, 1 x 6mm titanium-plated dynamic driver, 2 x 30095 balanced armatures)
Form FactorIn-ear
Frequency Response20Hz - 20kHz
Harman Preference Score64 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance22 ohms
Sensitivity112 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.7 dB at 30 Hz)
Tonal Tilt-0.69 (negative is warmer, positive brighter)
Weight0 lbs (4.6 g) (per earbud)

EQ Presets

Harman target

Set a preamp of -7.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 84 out of 100, up from 64.

FilterFrequencyGainQ
Low shelf105 Hz-0.8 dB0.70
High shelf10,000 Hz-4.8 dB0.70
Peak165 Hz-3.7 dB0.95
Peak1,796 Hz-4.2 dB3.45
Peak2,651 Hz+1.9 dB6.00
Peak3,047 Hz+4.7 dB5.17
Peak5,345 Hz+3.8 dB0.63

Neutral target

Set a preamp of -7.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 85 out of 100, up from 29.

FilterFrequencyGainQ
Low shelf105 Hz-9.3 dB0.70
High shelf10,000 Hz-4.8 dB0.70
Peak164 Hz-3.6 dB0.83
Peak1,796 Hz-4.2 dB3.45
Peak2,650 Hz+1.9 dB6.00
Peak3,047 Hz+4.7 dB5.17
Peak5,345 Hz+3.8 dB0.63

Studio flat target

Set a preamp of -6.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 91 out of 100, up from 11.

FilterFrequencyGainQ
Low shelf105 Hz-11.7 dB0.70
High shelf10,000 Hz+1.0 dB0.70
Peak166 Hz-5.4 dB0.81
Peak731 Hz+1.7 dB2.32
Peak1,780 Hz-3.4 dB4.82
Peak2,503 Hz+1.7 dB6.00
Peak2,954 Hz+6.0 dB2.14
Peak3,609 Hz+3.0 dB6.00
Peak4,583 Hz-2.5 dB6.00
Peak5,896 Hz+4.4 dB6.00

Warm target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz-0.5 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak164 Hz-3.5 dB1.00
Peak731 Hz+2.1 dB1.90
Peak1,813 Hz-4.2 dB3.88
Peak2,696 Hz+2.1 dB6.00
Peak3,152 Hz+6.0 dB3.73
Peak4,533 Hz-2.8 dB6.00
Peak5,936 Hz+4.2 dB6.00

Bass target

Set a preamp of -7.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 85 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz+3.0 dB0.70
High shelf10,000 Hz-4.8 dB0.70
Peak174 Hz-3.7 dB1.00
Peak1,796 Hz-4.2 dB3.44
Peak2,651 Hz+1.9 dB6.00
Peak3,048 Hz+4.7 dB5.18
Peak5,345 Hz+3.8 dB0.63

Bright target

Set a preamp of -6.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 84 out of 100, up from 19.

FilterFrequencyGainQ
Low shelf105 Hz-9.3 dB0.70
High shelf10,000 Hz-0.9 dB0.70
Peak164 Hz-3.6 dB0.80
Peak698 Hz+1.7 dB1.97
Peak1,767 Hz-4.2 dB4.45
Peak2,053 Hz-1.6 dB6.00
Peak2,959 Hz+4.2 dB3.76
Peak5,345 Hz+4.9 dB0.69
Peak6,965 Hz-2.5 dB5.47

V-shaped target

Set a preamp of -6.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 81 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+3.7 dB0.70
High shelf10,000 Hz+0.7 dB0.70
Peak153 Hz-2.3 dB1.13
Peak1,793 Hz-4.3 dB3.18
Peak2,659 Hz+1.6 dB6.00
Peak3,148 Hz+6.0 dB1.47
Peak5,619 Hz+5.3 dB4.25

Frequency Response

How the TRN V10 PRO measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

TRN V10 PROHarman target
Measured frequency response of the TRN V10 PRO-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of eplv, obodio and tonedeafmonk. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

3 comparisons

More TRN headphones →