Symphonium Zenith Review: Ranked #269 of 1061

Last updated: October 15, 2026

The Symphonium Zenith ranks #269 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Symphonium

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#269 Symphonium Zenith Bay Bloor Radio eBay

Pros: A four balanced armature flagship whose bass sits right on the Harman target, with full sub-bass to 20 Hz unusual for an all-BA IEM (score 76).

Cons: Treble sits about 3.6 dB below target, so it sounds relaxed and less detailed up top. It is expensive, sold mainly through Canadian dealers, and its score rests on three measurements. A 6.1 ohm impedance suits a low output impedance source.

Is the Symphonium Zenith right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 76).
  • your taste runs warm: it scores 88 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 3.6 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
Released2026 (this year)
BackClosed
ConnectionWired
Deviation From Target1.64 dB standard deviation
Driver TypeBalanced Armature
Drivers4 x balanced armature (TrueX 4-way crossover)
Form FactorIn-ear
Frequency Response10Hz - 20kHz
Harman Preference Score76 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance6.1 ohms
Sensitivity108 dB/Vrms
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.4 dB at 30 Hz)
Tonal Tilt-0.53 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz+0.4 dB0.70
High shelf10,000 Hz-5.1 dB0.70
Peak4,377 Hz+5.2 dB1.03

Neutral target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 40.

FilterFrequencyGainQ
Low shelf105 Hz-8.2 dB0.70
High shelf10,000 Hz-5.1 dB0.70
Peak4,376 Hz+5.2 dB1.03

Studio flat target

Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 89 out of 100, up from 20.

FilterFrequencyGainQ
Low shelf105 Hz-10.8 dB0.70
High shelf10,000 Hz+0.7 dB0.70
Peak33 Hz-0.8 dB3.17
Peak182 Hz-1.7 dB0.40
Peak2,656 Hz+2.3 dB4.18
Peak3,893 Hz+5.3 dB0.98
Peak5,153 Hz-2.6 dB6.00

Warm target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 88.

FilterFrequencyGainQ
Low shelf105 Hz+0.6 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak4,194 Hz+4.2 dB1.97

Bass target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 75.

FilterFrequencyGainQ
Low shelf105 Hz+4.1 dB0.70
High shelf10,000 Hz-5.1 dB0.70
Peak4,377 Hz+5.2 dB1.03

Bright target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 84 out of 100, up from 28.

FilterFrequencyGainQ
Low shelf105 Hz-8.2 dB0.70
High shelf10,000 Hz-1.3 dB0.70
Peak57 Hz-0.8 dB0.82
Peak1,315 Hz-1.0 dB1.52
Peak3,560 Hz+1.7 dB2.42
Peak5,345 Hz+5.6 dB0.70
Peak6,935 Hz-3.1 dB5.77

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 82 out of 100, up from 65.

FilterFrequencyGainQ
Low shelf105 Hz+4.8 dB0.70
Peak187 Hz+1.3 dB0.82
Peak1,242 Hz-1.5 dB2.07
Peak3,374 Hz+2.0 dB2.44
Peak5,345 Hz+5.6 dB0.63
Peak6,993 Hz-3.6 dB5.51

Frequency Response

How the Symphonium Zenith measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Symphonium ZenithHarman target
Measured frequency response of the Symphonium Zenith-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of aden, aftersound and precog. Thanks to each of them for publishing their work.

More Symphonium headphones →