Status Audio Pro X Review: Ranked #266 of 1448

Last updated: October 20, 2026

The Status Audio Pro X ranks #266 out of 1448 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#266 Status Audio Pro X: $249.00 TWS Amazon $249.00 eBay

Pros: ANC earbuds with a dynamic driver and two Knowles balanced armatures, LDAC, AAC, LE Audio LC3 and IP55. Sub bass reaches fully to 20 Hz and bass and mids stay within about 0.7 dB of target. Battery life is 8 hours, 32 with the case.

Cons: Upper bass sits about 2.5 dB high, and a 7.7 dB peak near 8.2 kHz after dips near 5.3 and 6.3 kHz makes the treble uneven. The JBL Tour Pro 3 rates higher for less, and the score rests on a single measurement.

Is the Status Audio Pro X right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 77).
  • your taste runs warm: it scores 80 for that sound.
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you want noise cancelling for commutes or flights.

Skip it if

ReleasedSep 2025 (1 year ago)
Active Noise CancellingYes
BackClosed
Battery Life8 hours (32 with case)
Bluetooth CodecsSBC, AAC, LDAC, LC3
Bluetooth Version5.3
Built-in MicrophoneYes (6 mics)
ConnectionTrue wireless
Deviation From Target1.80 dB standard deviation
Driver TypeHybrid (1 dynamic + 2 balanced armature)
Drivers1 x 12mm dynamic + 2 x balanced armature
Form FactorIn-ear
Harman Preference Score77 (1 squig.link measurement, calibrated to AutoEQ)
IP RatingIP55
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.1 dB at 30 Hz)
Tonal Tilt-0.36 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz-0.7 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak229 Hz-3.4 dB0.87
Peak997 Hz+1.6 dB3.45
Peak3,200 Hz+1.9 dB3.59
Peak4,274 Hz-2.1 dB6.00
Peak5,784 Hz+3.8 dB5.37
Peak7,853 Hz-2.5 dB6.00

Neutral target

Set a preamp of -3.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 90 out of 100, up from 41.

FilterFrequencyGainQ
Low shelf105 Hz-9.2 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak225 Hz-3.3 dB0.74
Peak994 Hz+1.6 dB3.18
Peak3,195 Hz+1.9 dB3.53
Peak4,275 Hz-2.1 dB6.00
Peak5,782 Hz+3.8 dB5.35
Peak7,853 Hz-2.5 dB6.00

Studio flat target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 85 out of 100, up from 22.

FilterFrequencyGainQ
Low shelf105 Hz-11.4 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak225 Hz-5.1 dB0.73
Peak2,836 Hz+4.0 dB2.75
Peak4,264 Hz-3.4 dB6.00

Warm target

Set a preamp of -1.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 91 out of 100, up from 80.

FilterFrequencyGainQ
Low shelf105 Hz-0.5 dB0.70
High shelf10,000 Hz-3.9 dB0.70
Peak58 Hz+0.7 dB2.42
Peak116 Hz-1.1 dB5.27
Peak229 Hz-3.2 dB0.92
Peak973 Hz+1.9 dB3.87
Peak2,063 Hz-1.4 dB4.27
Peak4,234 Hz-4.3 dB6.00
Peak5,830 Hz+1.9 dB4.65
Peak7,668 Hz-4.4 dB6.00

Bass target

Set a preamp of -3.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz+3.1 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak234 Hz-3.5 dB0.92
Peak998 Hz+1.6 dB3.51
Peak3,201 Hz+1.9 dB3.61
Peak4,274 Hz-2.1 dB6.00
Peak5,784 Hz+3.8 dB5.38
Peak7,853 Hz-2.5 dB6.00

Bright target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 87 out of 100, up from 31.

FilterFrequencyGainQ
Low shelf105 Hz-9.3 dB0.70
High shelf10,000 Hz+1.9 dB0.70
Peak225 Hz-3.3 dB0.75
Peak997 Hz+1.6 dB3.15
Peak3,167 Hz+2.7 dB4.32
Peak4,289 Hz-1.9 dB6.00
Peak5,527 Hz+6.0 dB2.94

V-shaped target

Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 85 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+3.8 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak250 Hz-2.2 dB1.11
Peak3,082 Hz+2.8 dB4.20
Peak4,304 Hz-2.4 dB6.00
Peak5,434 Hz+5.5 dB2.05

Frequency Response

How the Status Audio Pro X measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Status Audio Pro XHarman target
Measured frequency response of the Status Audio Pro X-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of dhrme. Thanks to them for publishing their work.