Soranik MEMS-3S 2025 Review: Ranked #804 of 1253

Last updated: October 16, 2026

The Soranik MEMS-3S 2025 ranks #804 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Soranik MEMS-3S 2025 - ranked #804 of 1253 In-Ear Headphones · Editor's rating 3.5/5

#804 Soranik MEMS-3S 2025: $1,200 eBay

Pros: A broadly balanced tuning with a preference score of 68 against the Harman target. About 3 dB more bass than the Harman target below 150 Hz, for listeners who want a fuller low end.

Cons: An uneven response, 2.3 dB standard deviation from target.

Is the Soranik MEMS-3S 2025 right for you?

Buy it if

  • your taste runs bass-heavy: it scores 83 for that sound.
  • you like extra bass (about +3 dB below 150 Hz versus the target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 22 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $1,176 less.
BackClosed
ConnectionWired (3.5mm / 4.4mm)
Deviation From Target2.27 dB standard deviation
Driver TypeHybrid
Drivers1 Dynamic, 2 MEMS
Form FactorIn-ear
Harman Preference Score68 (median of 4 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+5.6 dB at 30 Hz)
Tonal Tilt-0.77 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz-4.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz-2.4 dB2.88
Peak82 Hz+1.5 dB1.50
Peak1,393 Hz-1.7 dB3.96
Peak4,961 Hz+4.9 dB3.13
Peak7,357 Hz-1.5 dB5.44

Neutral target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 84 out of 100, up from 26.

FilterFrequencyGainQ
Low shelf105 Hz-11.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak1,394 Hz-1.6 dB4.00
Peak4,961 Hz+4.9 dB3.13

Studio flat target

Set a preamp of -3.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 79 out of 100, up from 10.

FilterFrequencyGainQ
Low shelf105 Hz-11.9 dB0.70
High shelf10,000 Hz-3.9 dB0.70
Peak63 Hz-1.0 dB3.96
Peak154 Hz-2.5 dB0.68
Peak608 Hz+1.1 dB2.00
Peak1,414 Hz-1.8 dB3.44
Peak2,773 Hz+2.6 dB1.36
Peak4,953 Hz+2.7 dB4.59
Peak6,905 Hz-1.5 dB6.00

Warm target

Set a preamp of -2.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 91 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz-3.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz-2.4 dB2.37
Peak82 Hz+1.7 dB1.65
Peak584 Hz+1.5 dB1.51
Peak1,475 Hz-1.8 dB3.64
Peak3,150 Hz-2.0 dB3.82
Peak5,032 Hz+2.9 dB5.31
Peak7,438 Hz-4.0 dB5.36

Bass target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 83.

FilterFrequencyGainQ
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz-2.4 dB2.87
Peak82 Hz+1.5 dB1.50
Peak1,394 Hz-1.7 dB3.95
Peak4,961 Hz+4.9 dB3.13
Peak7,357 Hz-1.5 dB5.44

Bright target

Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 83 out of 100, up from 18.

FilterFrequencyGainQ
Low shelf105 Hz-11.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak1,404 Hz-1.8 dB3.56
Peak5,156 Hz+6.0 dB1.52

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 91 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz+0.4 dB0.70
High shelf10,000 Hz-5.0 dB0.70
Peak24 Hz-2.1 dB2.12
Peak109 Hz+1.8 dB0.60
Peak482 Hz+1.4 dB1.58
Peak1,335 Hz-2.1 dB3.61
Peak4,320 Hz+1.7 dB6.00
Peak5,345 Hz+6.0 dB1.27

Frequency Response

How the Soranik MEMS-3S 2025 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Soranik MEMS-3S 2025Harman target
Measured frequency response of the Soranik MEMS-3S 2025-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of aftersound, dchpgall, hbb and vsg. Thanks to each of them for publishing their work.