Sivga Anser Review: Ranked #314 of 483

Last updated: October 17, 2026

The Sivga Anser ranks #314 out of 483 total Over-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Sivga

Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#314 Sivga Anser: $199.00 Amazon $199.00 eBay

Pros: A published AutoEQ preset corrects its response toward the Harman target, so a few minutes of EQ setup closes most of the gap.

Cons: The rating reflects sound quality only; comfort, build and noise isolation are not part of the score.

Is the Sivga Anser right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 27 points.

Skip it if

  • you need isolation or will use it in public: open-back headphones leak sound both ways.
  • you want the best value: the higher-rated Superlux HD 668B costs about $149 less.
BackOpen
ConnectionWired
Deviation From Target2.69 dB standard deviation
Driver TypeDynamic
Drivers1 x 50mm dynamic driver (titanium-plated diaphragm & carbon fiber polymer dome)
Form FactorOver-ear
Frequency Response20Hz - 20kHz
Harman Preference Score64 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance38 ohms
Sensitivity105 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+1.0 dB at 30 Hz)
Tonal Tilt-1.02 (negative is warmer, positive brighter)
Weight0.8 lbs (342 g)

EQ Presets

Harman target

Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 64.

FilterFrequencyGainQ
Low shelf105 Hz-1.1 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak143 Hz-5.9 dB1.14
Peak2,662 Hz-3.5 dB1.67
Peak6,734 Hz+3.6 dB2.82

Neutral target

Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 39.

FilterFrequencyGainQ
Low shelf105 Hz-6.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak139 Hz-5.9 dB1.06
Peak2,662 Hz-3.5 dB1.67
Peak6,734 Hz+3.6 dB2.82

Studio flat target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 91 out of 100, up from 12.

FilterFrequencyGainQ
Low shelf105 Hz-8.7 dB0.70
High shelf10,000 Hz-0.8 dB0.70
Peak23 Hz+2.1 dB2.71
Peak151 Hz-7.5 dB0.94
Peak4,095 Hz-2.5 dB6.00
Peak6,342 Hz+2.8 dB2.25

Warm target

Set a preamp of -0.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 96 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz-0.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak141 Hz-5.7 dB1.15
Peak2,020 Hz-2.9 dB2.55
Peak3,654 Hz-3.6 dB1.14
Peak6,314 Hz+2.0 dB2.04

Bass target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz+2.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak144 Hz-5.9 dB1.17
Peak2,662 Hz-3.5 dB1.66
Peak6,734 Hz+3.6 dB2.82

Bright target

Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 78 out of 100, up from 20.

FilterFrequencyGainQ
Low shelf105 Hz-6.8 dB0.70
High shelf10,000 Hz-3.9 dB0.70
Peak139 Hz-5.9 dB1.04
Peak2,498 Hz-3.2 dB2.05
Peak5,637 Hz+6.0 dB3.16

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 76 out of 100, up from 58.

FilterFrequencyGainQ
Low shelf105 Hz+3.4 dB0.70
High shelf10,000 Hz-2.7 dB0.70
Peak23 Hz+2.7 dB2.50
Peak136 Hz-4.7 dB1.30
Peak456 Hz+2.2 dB1.73
Peak1,722 Hz-1.9 dB4.44
Peak2,498 Hz-2.6 dB2.06
Peak3,386 Hz+1.9 dB6.00
Peak5,544 Hz+6.0 dB2.95
Peak8,000 Hz+1.8 dB3.68

Frequency Response

How the Sivga Anser measures across the audible range, against the Harman over-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Sivga AnserHarman target
Measured frequency response of the Sivga Anser-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of auricularesargentina, capraaudio and superreview. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

4 comparisons

More Sivga headphones →