Shure SE112 Review: Ranked #848 of 865

Last updated: October 13, 2026

The Shure SE112 ranks #848 out of 865 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Shure

Prices on this page were last checked October 13, 2026 at 3:17 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Shure SE112 - ranked #848 of 865 In-Ear Headphones · Editor's rating 1.3/5

#848 Shure SE112 Discontinued eBay

Pros: Lower mids sit within about 0.7 dB of target, keeping voices and guitars natural. It uses 1 x dynamic with an easy 16 ohm load.

Cons: Discontinued, so it is mainly found used. Presence sits about 4.7 dB low with a 14.8 dB dip near 7.0 kHz, so vocals and instruments lose some bite. A Harman score of 41 places it in the lower part of the in-ear rankings.

Released2014 (12 years ago)
ConnectionWired
Deviation From Target4.37 dB standard deviation
Driver TypeDynamic
Drivers1 x dynamic
Form FactorIn-ear
Frequency Response25Hz - 17kHz
Harman Preference Score41 (measured by oratory1990, via AutoEQ)
Impedance16 ohms
Sensitivity105 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-2.2 dB at 30 Hz)
Tonal Tilt-1.40 (negative is warmer, positive brighter)
EQ preset to match the Harman target

Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+0.1 dB0.70
Peak182 Hz-5.9 dB0.68
Peak6,786 Hz+7.1 dB0.62
Peak26 Hz-0.2 dB1.63
Peak4,572 Hz-10.2 dB5.32
High shelf10,000 Hz+4.8 dB0.70
Peak842 Hz+1.4 dB1.93
Peak2,104 Hz-1.9 dB1.98
Peak3,086 Hz+1.8 dB3.24
Peak8,246 Hz-1.8 dB2.24

More Shure headphones →