Roseselsa Aurora Ultra Review: Ranked #1110 of 1398

Last updated: October 20, 2026

The Roseselsa Aurora Ultra ranks #1110 out of 1398 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Roseselsa

Prices on this page were last checked October 19, 2026 at 10:32 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#1110 Roseselsa Aurora Ultra: $39.99 Amazon $39.99 eBay

Pros: A dynamic plus planar hybrid at about $40, measured by 12 reviewers, whose bass and midrange stay within 3 dB of target with sub bass to 20 Hz. 115 dB/mW sensitivity makes it loud from any phone or dongle.

Cons: A deep dip of about 9 dB from 6.7 to 7.1 kHz followed by a 5.5 dB peak near 11.5 kHz makes the treble uneven, so detail can sound veiled with an odd sparkle on top. The EPZ Q1 Pro scores far higher at a similar price.

Is the Roseselsa Aurora Ultra right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 4.0 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 22 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $16 less.
Released2024 (2 years ago)
BackClosed
ConnectionWired
Deviation From Target2.87 dB standard deviation
Driver TypeHybrid (1 dynamic + 1 planar magnetic)
Drivers1 x 10mm dynamic + 1 x 6mm dual-magnet planar
Form FactorIn-ear
Harman Preference Score61 (median of 12 squig.link measurements, calibrated to AutoEQ)
Impedance30 ohms
Sensitivity115 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.0 dB at 30 Hz)
Tonal Tilt-0.79 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 83 out of 100, up from 61.

FilterFrequencyGainQ
Low shelf105 Hz-0.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak186 Hz-3.6 dB0.81
Peak702 Hz+1.6 dB2.08
Peak1,992 Hz-3.3 dB4.64
Peak3,161 Hz+3.3 dB5.10
Peak5,564 Hz+5.4 dB1.41

Neutral target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 86 out of 100, up from 28.

FilterFrequencyGainQ
Low shelf105 Hz-9.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak85 Hz-1.1 dB1.87
Peak186 Hz-3.6 dB0.72
Peak686 Hz+1.7 dB1.87
Peak1,566 Hz-1.0 dB3.09
Peak1,994 Hz-3.3 dB4.72
Peak3,161 Hz+3.3 dB5.10
Peak5,563 Hz+5.4 dB1.41

Studio flat target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 85 out of 100, up from 11.

FilterFrequencyGainQ
Low shelf105 Hz-11.6 dB0.70
High shelf10,000 Hz+0.5 dB0.70
Peak174 Hz-5.4 dB0.74
Peak1,926 Hz-2.7 dB3.86
Peak3,072 Hz+4.3 dB6.00
Peak5,345 Hz+3.7 dB0.67

Warm target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 85 out of 100, up from 70.

FilterFrequencyGainQ
High shelf10,000 Hz-6.0 dB0.70
Peak186 Hz-3.4 dB0.85
Peak1,993 Hz-3.8 dB3.91
Peak3,200 Hz+2.9 dB5.01
Peak5,919 Hz+5.7 dB3.07

Bass target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 84 out of 100, up from 66.

FilterFrequencyGainQ
Low shelf105 Hz+3.3 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak24 Hz+1.1 dB1.22
Peak186 Hz-3.6 dB0.86
Peak711 Hz+1.6 dB2.21
Peak1,990 Hz-3.3 dB4.60
Peak3,161 Hz+3.3 dB5.10
Peak5,565 Hz+5.4 dB1.41

Bright target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 79 out of 100, up from 16.

FilterFrequencyGainQ
Low shelf105 Hz-9.0 dB0.70
High shelf10,000 Hz-2.3 dB0.70
Peak85 Hz-1.1 dB1.85
Peak186 Hz-3.6 dB0.70
Peak678 Hz+1.7 dB1.92
Peak1,553 Hz-1.0 dB2.94
Peak1,984 Hz-3.4 dB4.66
Peak3,225 Hz+3.5 dB4.46
Peak5,345 Hz+5.9 dB1.15

V-shaped target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 74 out of 100, up from 56.

FilterFrequencyGainQ
Low shelf105 Hz+4.0 dB0.70
High shelf10,000 Hz-0.6 dB0.70
Peak95 Hz-1.0 dB2.42
Peak186 Hz-2.3 dB0.94
Peak627 Hz+1.3 dB1.89
Peak1,933 Hz-3.0 dB2.89
Peak2,849 Hz+1.5 dB6.00
Peak3,260 Hz+3.7 dB5.53
Peak5,345 Hz+5.8 dB0.99
Peak6,747 Hz-2.8 dB6.00

Frequency Response

How the Roseselsa Aurora Ultra measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 12 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Roseselsa Aurora UltraHarman target
Measured frequency response of the Roseselsa Aurora Ultra-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 12 measurements from the squig.link databases of atechreviews, audioamigo, elrics, hobbytalk, jaytiss, lumerion, obodio, practiphile, soundcheck39, theaudiostore, tonedeafmonk and treblewellxtended. Thanks to each of them for publishing their work.

More Roseselsa headphones →