RODE NTH-100 Review: Ranked #68 of 134

Last updated: October 10, 2026

The RODE NTH-100 ranks #68 out of 134 total Over-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#68 RODE NTH-100: $129.00 Amazon eBay

Pros: Bass from 60 to 200 Hz and the low mids are lifted about 2 dB, giving a warm, full sound with body in voices and guitars. The deviation of 2.1 dB is smooth, and 32 ohm impedance with high sensitivity runs from a laptop or audio interface. The closed back and 350 g weight suit studio and podcast monitoring.

Cons: Treble from 6 to 10 kHz is about 3.4 dB under target, with a 5.6 dB dip near 7.8 kHz, so cymbals and sibilance sound muted. Sub-bass is about 3 dB light, so the lowest notes lack rumble. The Audio-Technica ATH-M40x holds a higher rating for a lower price.

BackClosed
ConnectionWired
Deviation From Target2.10 dB standard deviation
Driver TypeDynamic
Drivers1 x 40mm dynamic
Form FactorOver-ear
Frequency Response5Hz - 35kHz (Manufacturer specified)
Harman Preference Score76 (measured by oratory1990, via AutoEQ)
Impedance32 ohms
Sensitivity110 dB/V
Tonal Tilt-0.80 (negative is warmer, positive brighter)
Weight0.8 lbs (350 g)
EQ preset to match the Harman target

Set a preamp of -6.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+13.5 dB0.70
Peak52 Hz-10.9 dB0.36
Peak7,684 Hz+4.2 dB1.34
Peak1,613 Hz+2.6 dB1.65
Peak5,510 Hz-2.7 dB2.80
High shelf10,000 Hz+2.3 dB0.70
Peak411 Hz-1.4 dB1.68
Peak198 Hz+1.1 dB1.96
Peak3,013 Hz-1.2 dB4.00
Peak828 Hz+0.7 dB2.42