Short answer: the RODE NTH-100. It ranks #181 of 481 over-ear headphones by sound quality, rated 3.7/5, at $129; the Beyerdynamic DT 270 Pro ranks #212, rated 3.6/5, and costs $129.99, which makes this an easy call rather than a real tradeoff.
Why pick the RODE NTH-100: Bass from 60 to 200 Hz and the low mids are lifted about 2 dB, giving a warm, full sound with body in voices and guitars. The catch: Treble from 6 to 10 kHz is about 3.4 dB under target, with a 5.6 dB dip near 7.8 kHz, so cymbals and sibilance sound muted.
Why pick the Beyerdynamic DT 270 Pro: The median of 5 hobbyist measurements gives it a solid Harman preference score of 74 with a 2.17 dB spread, and its mids sit within about 1 dB of target, so vocals and instruments sound natural. The catch: A 5 dB peak near 11.9 kHz can make cymbals and sibilance sound sharp.
Buy the RODE NTH-100. It is rated higher for sound quality than the Beyerdynamic DT 270 Pro and costs less, so only choose the other one for a particular feature it does better.
Looking for alternatives? See the complete Headphones rankings.
Bass from 60 to 200 Hz and the low mids are lifted about 2 dB, giving a warm, full sound with body in voices and guitars.
Amazon $129.00 eBay
The median of 5 hobbyist measurements gives it a solid Harman preference score of 74 with a 2.17 dB spread, and its mids sit within about 1 dB of target, so vocals and instruments sound natural.
Amazon $129.99 eBayPrices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| RODE NTH-100 | Beyerdynamic DT 270 Pro | |
|---|---|---|
| Price | $129.00 | $129.99 |
| Ranked | #181 of 481 in Over-Ear Headphones | #212 of 481 in Over-Ear Headphones |
| Form Factor | Over-ear | Over-ear |
| Harman Preference Score | 76 (measured by oratory1990, via AutoEQ) | 74 (median of 5 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 2.10 dB standard deviation | 2.17 dB standard deviation |
| Tonal Tilt | -0.80 (negative is warmer, positive brighter) | -0.79 (negative is warmer, positive brighter) |
| Sub-bass Extension | Falls 6 dB below target at 27 Hz (-5.6 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+2.2 dB at 30 Hz) |
| Connection | Wired | Wired |
| Back | Closed | Closed |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 40mm dynamic | 1 x 42mm dynamic |
| Impedance | 32 ohms | 45 ohms |
| Sensitivity | 110 dB/V | 96 dB/mW |
| Weight | 0.8 lbs (350 g) | 0.4 lbs (194 g) |
| Frequency Response | 5Hz - 35kHz (Manufacturer specified) | 5Hz - 24kHz |
Frequency Response Compared
Both headphones’ measurements overlaid on the Harman target. Above the target sounds louder in that range, below it quieter. Each curve is the median of several independent measurements, shifted so its 500 Hz to 2 kHz average sits at 0 dB, so only the tuning is compared.
Measurement data: the RODE NTH-100 from boizoff, cammyfi, kuulokenurkka and suporsalad; the Beyerdynamic DT 270 Pro from boizoff, daemonxar, gadgetrytech, ish and sai, all via squig.link.
Related Headphone Comparisons
More worthwhile head-to-heads for RODE NTH-100: