Penon UNIQ Review: Ranked #1087 of 1398

Last updated: October 20, 2026

The Penon UNIQ ranks #1087 out of 1398 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Penon

Prices on this page were last checked October 19, 2026 at 10:32 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#1087 Penon UNIQ: $229.00 Penon Audio $229.00 eBay

Pros: A single carbon nanofilm dynamic driver with full sub bass to 20 Hz and bass about 4 dB above target, for listeners who like a warm, weighty low end. The midrange from 300 Hz to 2 kHz stays within 0.2 dB of target, so voices sound natural, and 108 dB sensitivity runs easily from a phone.

Cons: Upper bass is also about 4 dB high, which thickens the sound, and treble has a dip near 6.5 kHz, a 5 dB peak near 8.2 kHz and a dip near 9.7 kHz, so detail can sound uneven. The score rests on three measurements, and the EPZ P40 scores far higher for less.

Is the Penon UNIQ right for you?

Buy it if

  • you like extra bass (about +4 dB below 150 Hz versus the target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 25 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $205 less.
Released2025 (1 year ago)
BackClosed
ConnectionWired
Deviation From Target2.56 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm carbon nanofilm dynamic
Form FactorIn-ear
Harman Preference Score62 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance23 ohms
Sensitivity108 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+2.7 dB at 30 Hz)
Tonal Tilt-1.06 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz-3.6 dB0.70
High shelf10,000 Hz-4.0 dB0.70
Peak36 Hz+0.8 dB1.95
Peak177 Hz-5.0 dB0.80
Peak763 Hz+1.3 dB2.66
Peak2,075 Hz-1.1 dB3.45
Peak3,430 Hz+3.5 dB4.37
Peak4,905 Hz-2.6 dB6.00
Peak6,240 Hz+2.5 dB6.00

Neutral target

Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 22.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz-4.0 dB0.70
Peak82 Hz-0.8 dB2.70
Peak174 Hz-4.8 dB0.69
Peak742 Hz+1.4 dB2.26
Peak2,079 Hz-1.1 dB3.47
Peak3,429 Hz+3.5 dB4.33
Peak4,904 Hz-2.6 dB6.00
Peak6,240 Hz+2.5 dB6.00

Studio flat target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 80 out of 100, up from 2.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+1.7 dB0.70
Peak164 Hz-7.2 dB0.73
Peak786 Hz+1.3 dB2.42
Peak3,107 Hz+5.0 dB3.40
Peak3,710 Hz+1.4 dB6.00
Peak4,923 Hz-4.2 dB6.00

Warm target

Set a preamp of -1.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz-3.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak35 Hz+0.8 dB1.90
Peak175 Hz-4.7 dB0.82
Peak767 Hz+1.6 dB2.37
Peak2,120 Hz-2.0 dB4.10
Peak3,439 Hz+2.1 dB4.82
Peak4,921 Hz-4.5 dB6.00
Peak7,641 Hz-2.4 dB6.00

Bass target

Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 74.

FilterFrequencyGainQ
High shelf10,000 Hz-4.0 dB0.70
Peak33 Hz+1.1 dB1.42
Peak182 Hz-5.0 dB0.86
Peak767 Hz+1.3 dB2.75
Peak2,073 Hz-1.1 dB3.42
Peak3,430 Hz+3.5 dB4.38
Peak4,905 Hz-2.6 dB6.00
Peak6,240 Hz+2.5 dB6.00

Bright target

Set a preamp of -4.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 84 out of 100, up from 12.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak174 Hz-4.8 dB0.66
Peak733 Hz+1.3 dB2.16
Peak2,093 Hz-1.6 dB3.10
Peak3,452 Hz+2.8 dB6.00
Peak5,345 Hz+3.1 dB0.78

V-shaped target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 84 out of 100, up from 65.

FilterFrequencyGainQ
Low shelf105 Hz+0.8 dB0.70
High shelf10,000 Hz+0.7 dB0.70
Peak174 Hz-3.6 dB0.85
Peak1,939 Hz-1.2 dB2.02
Peak3,419 Hz+3.0 dB5.58
Peak5,345 Hz+3.5 dB0.72

Frequency Response

How the Penon UNIQ measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Penon UNIQHarman target
Measured frequency response of the Penon UNIQ-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of atechreviews, eliseaudio and soundignity. Thanks to each of them for publishing their work.

More Penon headphones →