Penon Fan 3 Review: Ranked #673 of 1253

Last updated: October 16, 2026

The Penon Fan 3 ranks #673 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Penon

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#673 Penon Fan 3: $349 Penon Audio $349 eBay

Pros: A broadly balanced tuning with a preference score of 70 against the Harman target.

Cons: An uneven response, 2.4 dB standard deviation from target.

Is the Penon Fan 3 right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 14 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $325 less.
BackClosed
ConnectionWired (3.5mm / 4.4mm)
Deviation From Target2.38 dB standard deviation
Driver TypeTribrid
Drivers1 Dynamic, 2 Balanced Armature, 1 Bone Conduction
Form FactorIn-ear
Harman Preference Score70 (median of 10 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-3.2 dB at 30 Hz)
Tonal Tilt-0.16 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 84 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+1.7 dB0.70
High shelf10,000 Hz-4.8 dB0.70
Peak196 Hz-3.7 dB0.67
Peak5,345 Hz+3.2 dB0.61

Neutral target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 86 out of 100, up from 45.

FilterFrequencyGainQ
Low shelf105 Hz-6.9 dB0.70
High shelf10,000 Hz-4.8 dB0.70
Peak186 Hz-3.7 dB0.61
Peak5,345 Hz+3.2 dB0.61

Studio flat target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 89 out of 100, up from 26.

FilterFrequencyGainQ
Low shelf105 Hz-9.5 dB0.70
High shelf10,000 Hz+1.3 dB0.70
Peak194 Hz-5.5 dB0.66
Peak2,311 Hz+3.6 dB3.35
Peak5,345 Hz+2.9 dB0.40
Peak8,000 Hz-2.7 dB4.10

Warm target

Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 73.

FilterFrequencyGainQ
Low shelf105 Hz+1.9 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak189 Hz-3.5 dB0.73
Peak2,139 Hz+2.4 dB3.74
Peak3,605 Hz+1.5 dB6.00
Peak5,918 Hz+5.3 dB6.00
Peak8,000 Hz-2.5 dB6.00

Bass target

Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 85 out of 100, up from 60.

FilterFrequencyGainQ
Low shelf105 Hz+5.3 dB0.70
High shelf10,000 Hz-4.8 dB0.70
Peak204 Hz-3.7 dB0.73
Peak5,345 Hz+3.2 dB0.61

Bright target

Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 86 out of 100, up from 34.

FilterFrequencyGainQ
Low shelf105 Hz-6.9 dB0.70
High shelf10,000 Hz-0.9 dB0.70
Peak186 Hz-3.7 dB0.59
Peak1,326 Hz-1.3 dB4.56
Peak2,129 Hz+2.1 dB5.11
Peak3,663 Hz+1.4 dB6.00
Peak5,345 Hz+4.5 dB0.64
Peak7,012 Hz-2.1 dB6.00

V-shaped target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 84 out of 100, up from 60.

FilterFrequencyGainQ
Low shelf105 Hz+5.6 dB0.70
Peak43 Hz+0.9 dB1.49
Peak215 Hz-2.2 dB0.71
Peak1,272 Hz-1.8 dB3.29
Peak2,161 Hz+2.2 dB5.04
Peak3,671 Hz+1.7 dB6.00
Peak5,345 Hz+4.7 dB0.57
Peak7,035 Hz-2.7 dB6.00

Frequency Response

How the Penon Fan 3 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 10 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Penon Fan 3Harman target
Measured frequency response of the Penon Fan 3-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 10 measurements from the squig.link databases of aden, dl, flare, isaiahse, jaytiss, koi, sl0the, superreview, theaudiostore and treblewellxtended. Thanks to each of them for publishing their work.

More Penon headphones →