OnePlus Buds 3 Review: Ranked #263 of 1448

Last updated: October 20, 2026

The OnePlus Buds 3 ranks #263 out of 1448 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: OnePlus

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#263 OnePlus Buds 3: $89.99 TWS Amazon $89.99 eBay

Pros: ANC earbuds with a dual dynamic driver, LHDC, AAC and IP55, measured by two reviewers. Bass sits about 3 dB above target for a punchy low end, and presence and treble stay within 0.5 dB. Battery life is 10 hours, 44 with the case.

Cons: Upper bass is also about 1.7 dB high, giving a warm tilt, and a dip near 9.4 kHz slightly dulls the air. The Moondrop Golden Ages 2 rates higher at a similar price.

Is the OnePlus Buds 3 right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 77).
  • your taste runs warm: it scores 84 for that sound.
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you want noise cancelling for commutes or flights.

Skip it if

ReleasedJan 2024 (2 years ago)
Active Noise CancellingYes
BackClosed
Battery Life10 hours (44 with case)
Bluetooth CodecsSBC, AAC, LHDC
Bluetooth Version5.3
Built-in MicrophoneYes
ConnectionTrue wireless
Deviation From Target1.63 dB standard deviation
Driver TypeDynamic
Drivers1 x 10.4mm dynamic woofer + 1 x 6mm dynamic tweeter
Form FactorIn-ear
Frequency Response15Hz - 40kHz (Manufacturer specified)
Harman Preference Score77 (average of 2 squig.link measurements scored separately, calibrated to AutoEQ)
IP RatingIP55
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.1 dB at 30 Hz)
Tonal Tilt-0.53 (negative is warmer, positive brighter)
Weight0 lbs (4.8 g) per earbud

EQ Presets

Harman target

Set a preamp of -1.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 89 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz-2.2 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.1 dB1.12
Peak85 Hz-2.7 dB0.80
Peak330 Hz-1.9 dB1.04
Peak1,708 Hz+1.1 dB1.91
Peak2,839 Hz-1.5 dB6.00

Neutral target

Set a preamp of -1.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 90 out of 100, up from 36.

FilterFrequencyGainQ
Low shelf105 Hz-10.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+1.7 dB1.09
Peak85 Hz-3.0 dB0.73
Peak357 Hz-1.8 dB1.27
Peak1,708 Hz+1.1 dB1.96
Peak2,839 Hz-1.5 dB6.00

Studio flat target

Set a preamp of -2.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 82 out of 100, up from 17.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz-5.2 dB0.70
Peak43 Hz+1.9 dB1.21
Peak103 Hz-3.7 dB0.43
Peak357 Hz-2.0 dB1.17
Peak2,201 Hz+2.3 dB1.85
Peak5,386 Hz-2.1 dB4.45

Warm target

Set a preamp of -0.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 91 out of 100, up from 84.

FilterFrequencyGainQ
Low shelf105 Hz-2.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.1 dB1.22
Peak85 Hz-2.6 dB0.93
Peak313 Hz-1.7 dB1.17
Peak1,708 Hz+1.0 dB1.32
Peak2,831 Hz-1.7 dB6.00
Peak8,000 Hz-2.6 dB0.40

Bass target

Set a preamp of -3.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 82.

FilterFrequencyGainQ
Low shelf105 Hz+1.6 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.3 dB1.12
Peak85 Hz-2.6 dB0.87
Peak324 Hz-1.9 dB1.00
Peak1,708 Hz+1.1 dB1.91
Peak2,840 Hz-1.5 dB6.00

Bright target

Set a preamp of -3.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 87 out of 100, up from 26.

FilterFrequencyGainQ
Low shelf105 Hz-10.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+1.7 dB1.06
Peak85 Hz-3.0 dB0.72
Peak362 Hz-1.9 dB1.20
Peak1,708 Hz+1.0 dB2.55
Peak2,814 Hz-1.6 dB6.00
Peak4,003 Hz+1.1 dB5.23
Peak6,228 Hz+3.4 dB0.92

V-shaped target

Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 80 out of 100, up from 75.

FilterFrequencyGainQ
Low shelf105 Hz+2.2 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.1 dB1.54
Peak83 Hz-2.3 dB1.58
Peak5,710 Hz+3.8 dB0.90

Frequency Response

How the OnePlus Buds 3 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the average of 2 independent measurements, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

OnePlus Buds 3Harman target
Measured frequency response of the OnePlus Buds 3-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: the average of 2 independent measurements from the squig.link databases of dhrme and regancipher. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

1 comparisons

More OnePlus headphones →