NF Audio NA3 Review: Ranked #596 of 1061

Last updated: October 15, 2026

The NF Audio NA3 ranks #596 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: NF Audio

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#596 NF Audio NA3: $69.99 Shenzhenaudio $69.99 eBay

Pros: A single dynamic IEM with a dual cavity design. Measurements show full sub-bass to 20 Hz (score 69 across three measurements).

Cons: A 2.33 dB spread from the target shows peaks and dips that better tuned sets avoid. Its score rests on three measurements.

Is the NF Audio NA3 right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 19 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $46 less.
Released2022 (4 years ago)
BackClosed
ConnectionWired
Deviation From Target2.33 dB standard deviation
Driver TypeDynamic
Drivers1 x dynamic (dual cavity)
Form FactorIn-ear
Harman Preference Score69 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance32 ohms
Sensitivity105 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.4 dB at 30 Hz)
Tonal Tilt-0.48 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz-0.4 dB0.70
High shelf10,000 Hz-2.0 dB0.70
Peak32 Hz+0.8 dB1.47
Peak174 Hz-4.2 dB0.81
Peak735 Hz+1.5 dB2.43
Peak2,193 Hz-1.7 dB3.00
Peak3,817 Hz-2.8 dB4.07
Peak5,707 Hz+6.0 dB4.20
Peak6,464 Hz+0.9 dB1.21

Neutral target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 91 out of 100, up from 37.

FilterFrequencyGainQ
Low shelf105 Hz-9.0 dB0.70
High shelf10,000 Hz-2.0 dB0.70
Peak84 Hz-0.7 dB2.57
Peak174 Hz-4.1 dB0.73
Peak722 Hz+1.6 dB2.18
Peak2,201 Hz-1.7 dB3.07
Peak3,821 Hz-2.8 dB4.14
Peak5,706 Hz+6.0 dB4.20
Peak6,464 Hz+0.9 dB1.21

Studio flat target

Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 19.

FilterFrequencyGainQ
Low shelf105 Hz-11.5 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak173 Hz-6.0 dB0.76
Peak746 Hz+1.4 dB2.61
Peak2,809 Hz+1.6 dB3.64
Peak4,056 Hz-2.9 dB6.00
Peak5,795 Hz+6.0 dB5.28

Warm target

Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 76.

FilterFrequencyGainQ
High shelf10,000 Hz-5.6 dB0.70
Peak174 Hz-4.0 dB0.82
Peak739 Hz+1.8 dB2.06
Peak2,116 Hz-1.8 dB3.41
Peak3,654 Hz-3.5 dB1.67
Peak5,216 Hz+2.8 dB6.00
Peak5,858 Hz+6.0 dB6.00

Bass target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz+3.4 dB0.70
High shelf10,000 Hz-2.0 dB0.70
Peak32 Hz+1.0 dB1.31
Peak175 Hz-4.2 dB0.84
Peak739 Hz+1.5 dB2.52
Peak2,190 Hz-1.7 dB2.98
Peak3,815 Hz-2.8 dB4.04
Peak5,707 Hz+6.0 dB4.21
Peak6,464 Hz+0.9 dB1.21

Bright target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 83 out of 100, up from 25.

FilterFrequencyGainQ
Low shelf105 Hz-9.0 dB0.70
High shelf10,000 Hz+1.8 dB0.70
Peak83 Hz-0.7 dB2.52
Peak174 Hz-4.2 dB0.72
Peak722 Hz+1.5 dB2.14
Peak2,141 Hz-1.5 dB3.14
Peak3,884 Hz-1.5 dB6.00
Peak5,456 Hz+6.0 dB3.12
Peak6,887 Hz+0.6 dB0.87

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 77 out of 100, up from 64.

FilterFrequencyGainQ
Low shelf105 Hz+4.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak174 Hz-2.8 dB0.91
Peak5,408 Hz+6.0 dB2.83

Frequency Response

How the NF Audio NA3 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

NF Audio NA3Harman target
Measured frequency response of the NF Audio NA3-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of ianfann, musicafe and vortexreviews. Thanks to each of them for publishing their work.

More NF Audio headphones →