Myer Audio SLIIVO SLA3 Review: Ranked #287 of 1118

Last updated: October 17, 2026

The Myer Audio SLIIVO SLA3 ranks #287 out of 1118 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Myer Audio

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Myer Audio SLIIVO SLA3 - ranked #287 of 1118 In-Ear Headphones · Editor's rating 4.2/5

#287 Myer Audio SLIIVO SLA3: $104 eBay

Pros: A broadly balanced tuning with a preference score of 76 against the Harman target.

Cons: The rating reflects sound quality only; comfort, build and noise isolation are not part of the score.

Is the Myer Audio SLIIVO SLA3 right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 76).
  • your taste runs bass-heavy: it scores 84 for that sound.
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $80 less.
BackClosed
ConnectionWired
Deviation From Target1.69 dB standard deviation
Driver TypeHybrid
Drivers1 x 10mm dynamic + 3 x balanced armature
Form FactorIn-ear
Harman Preference Score76 (median of 8 squig.link measurements, calibrated to AutoEQ)
Impedance40 ohms
Sensitivity107 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+2.4 dB at 30 Hz)
Tonal Tilt-0.64 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz-2.3 dB0.70
High shelf10,000 Hz-0.6 dB0.70
Peak2,597 Hz-1.5 dB6.00
Peak3,845 Hz+5.8 dB3.32
Peak6,389 Hz+2.0 dB6.00

Neutral target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 94 out of 100, up from 35.

FilterFrequencyGainQ
Low shelf105 Hz-10.8 dB0.70
High shelf10,000 Hz-0.6 dB0.70
Peak23 Hz-1.2 dB1.25
Peak2,597 Hz-1.5 dB6.00
Peak3,845 Hz+5.8 dB3.31
Peak6,389 Hz+2.0 dB6.00

Studio flat target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 16.

FilterFrequencyGainQ
Low shelf105 Hz-11.8 dB0.70
High shelf10,000 Hz+1.9 dB0.70
Peak66 Hz-1.1 dB0.96
Peak309 Hz-1.5 dB0.40
Peak1,939 Hz+0.7 dB0.40
Peak3,515 Hz+5.9 dB2.59
Peak5,209 Hz-2.3 dB6.00

Warm target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 94 out of 100, up from 83.

FilterFrequencyGainQ
Low shelf105 Hz-2.0 dB0.70
High shelf10,000 Hz-4.3 dB0.70
Peak23 Hz-0.9 dB2.62
Peak140 Hz+0.9 dB1.33
Peak2,549 Hz-2.2 dB5.43
Peak3,777 Hz+4.3 dB6.00
Peak5,291 Hz-2.1 dB6.00
Peak8,000 Hz-2.4 dB6.00

Bass target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 93 out of 100, up from 84.

FilterFrequencyGainQ
Low shelf105 Hz+1.5 dB0.70
High shelf10,000 Hz-0.6 dB0.70
Peak2,597 Hz-1.5 dB6.00
Peak3,845 Hz+5.8 dB3.32
Peak6,388 Hz+2.0 dB6.00

Bright target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 88 out of 100, up from 24.

FilterFrequencyGainQ
Low shelf105 Hz-10.8 dB0.70
High shelf10,000 Hz+1.8 dB0.70
Peak2,585 Hz-2.0 dB5.34
Peak4,056 Hz+6.0 dB1.69
Peak5,988 Hz+2.5 dB6.00

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 86 out of 100, up from 73.

FilterFrequencyGainQ
Low shelf105 Hz+2.2 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak155 Hz+1.9 dB0.90
Peak2,597 Hz-1.9 dB5.78
Peak4,056 Hz+6.0 dB1.43
Peak5,934 Hz+2.3 dB6.00

Frequency Response

How the Myer Audio SLIIVO SLA3 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 8 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Myer Audio SLIIVO SLA3Harman target
Measured frequency response of the Myer Audio SLIIVO SLA3-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 8 measurements from the squig.link databases of atechreviews, audioamigo, avishai, flare, jaytiss, sl0the, soundcheck39 and tonedeafmonk. Thanks to each of them for publishing their work.

More Myer Audio headphones →