Myer Audio CKLVX Lava Review: Ranked #114 of 1253

Last updated: October 16, 2026

The Myer Audio CKLVX Lava ranks #114 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Myer Audio

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Myer Audio CKLVX Lava - ranked #114 of 1253 In-Ear Headphones · Editor's rating 4.5/5

#114 Myer Audio CKLVX Lava: $159 eBay

Pros: A broadly balanced tuning with a preference score of 80 against the Harman target.

Cons: The rating reflects sound quality only; comfort, build and noise isolation are not part of the score.

Is the Myer Audio CKLVX Lava right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 80).
  • your taste runs warm: it scores 89 for that sound.
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $135 less.
BackClosed
ConnectionWired
Deviation From Target1.26 dB standard deviation
Driver TypeHybrid
Drivers2 x dynamic, 3 x balanced armature, 1 x micro planar
Form FactorIn-ear
Harman Preference Score80 (median of 4 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.1 dB at 30 Hz)
Tonal Tilt-0.46 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 94 out of 100, up from 80.

FilterFrequencyGainQ
Low shelf105 Hz-0.7 dB0.70
High shelf10,000 Hz-5.5 dB0.70
Peak345 Hz-1.6 dB1.11
Peak2,065 Hz+1.3 dB4.37
Peak5,833 Hz+2.9 dB0.69

Neutral target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 96 out of 100, up from 41.

FilterFrequencyGainQ
Low shelf105 Hz-9.3 dB0.70
High shelf10,000 Hz-5.5 dB0.70
Peak23 Hz-1.1 dB1.62
Peak341 Hz-1.5 dB1.02
Peak2,063 Hz+1.3 dB4.33
Peak5,833 Hz+2.9 dB0.69

Studio flat target

Set a preamp of -3.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 94 out of 100, up from 22.

FilterFrequencyGainQ
Low shelf105 Hz-11.4 dB0.70
High shelf10,000 Hz+0.6 dB0.70
Peak36 Hz-0.7 dB1.05
Peak272 Hz-2.7 dB0.53
Peak2,700 Hz+3.8 dB1.30
Peak6,734 Hz+1.8 dB2.64

Warm target

Set a preamp of -1.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 95 out of 100, up from 89.

FilterFrequencyGainQ
Low shelf105 Hz-0.5 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak338 Hz-1.4 dB1.46
Peak2,058 Hz+1.1 dB4.14
Peak6,077 Hz+2.1 dB5.26

Bass target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 95 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz+3.0 dB0.70
High shelf10,000 Hz-5.5 dB0.70
Peak349 Hz-1.6 dB1.18
Peak2,066 Hz+1.3 dB4.40
Peak5,834 Hz+2.9 dB0.70

Bright target

Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 89 out of 100, up from 30.

FilterFrequencyGainQ
Low shelf105 Hz-9.3 dB0.70
High shelf10,000 Hz-1.6 dB0.70
Peak23 Hz-1.1 dB1.43
Peak340 Hz-1.6 dB0.98
Peak2,113 Hz+1.3 dB3.33
Peak5,345 Hz+5.1 dB0.99
Peak6,803 Hz-1.8 dB6.00

V-shaped target

Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 86 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+3.7 dB0.70
Peak135 Hz+1.2 dB1.50
Peak1,029 Hz-0.7 dB0.97
Peak2,168 Hz+1.5 dB3.97
Peak4,604 Hz+0.8 dB1.99
Peak5,345 Hz+5.1 dB0.80
Peak6,953 Hz-2.6 dB6.00

Frequency Response

How the Myer Audio CKLVX Lava measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Myer Audio CKLVX LavaHarman target
Measured frequency response of the Myer Audio CKLVX Lava-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of jaytiss, practiphile, soundcheck39 and tonedeafmonk. Thanks to each of them for publishing their work.

More Myer Audio headphones →