KZ Xtra Review: Ranked #501 of 1291

Last updated: October 17, 2026

The KZ Xtra ranks #501 out of 1291 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: KZ

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#501 KZ Xtra: $68.00 Wireless Amazon $68.00 eBay

Pros: A broadly balanced tuning with a preference score of 73 against the Harman target.

Cons: An uneven response, 2.0 dB standard deviation from target.

Is the KZ Xtra right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you want noise cancelling for commutes or flights.
  • you are happy to use EQ: our preset lifts its Harman match by about 20 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $44 less.
Active Noise CancellingYes (~55dB hybrid ANC)
BackClosed
Battery Life8 hours (earbuds), 32 hours (with charging case)
Bluetooth CodecsaptX Adaptive, aptX, AAC, SBC
Bluetooth Version5.4
ConnectionWireless
Deviation From Target1.99 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic driver
Form FactorIn-ear
Frequency Response20Hz - 20kHz
Harman Preference Score73 (median of 4 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.7 dB at 30 Hz)
Tonal Tilt-0.48 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -2.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 93 out of 100, up from 73.

FilterFrequencyGainQ
Low shelf105 Hz-1.5 dB0.70
High shelf10,000 Hz-0.9 dB0.70
Peak23 Hz+2.6 dB1.48
Peak101 Hz-5.2 dB1.22
Peak401 Hz-1.7 dB1.73
Peak3,921 Hz+2.3 dB2.69
Peak8,000 Hz-1.5 dB2.86

Neutral target

Set a preamp of -2.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 94 out of 100, up from 35.

FilterFrequencyGainQ
Low shelf105 Hz-10.0 dB0.70
High shelf10,000 Hz-0.9 dB0.70
Peak23 Hz+2.1 dB1.65
Peak97 Hz-5.5 dB1.15
Peak407 Hz-1.6 dB1.86
Peak3,921 Hz+2.3 dB2.68
Peak8,000 Hz-1.5 dB2.86

Studio flat target

Set a preamp of -3.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 92 out of 100, up from 16.

FilterFrequencyGainQ
Low shelf105 Hz-11.8 dB0.70
High shelf10,000 Hz+1.4 dB0.70
Peak124 Hz-5.5 dB0.76
Peak185 Hz+1.2 dB4.01
Peak417 Hz-2.0 dB2.04
Peak2,836 Hz+3.2 dB1.65
Peak5,866 Hz-2.7 dB4.45

Warm target

Set a preamp of -1.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 94 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz-1.3 dB0.70
High shelf10,000 Hz-3.7 dB0.70
Peak23 Hz+2.6 dB1.50
Peak100 Hz-5.1 dB1.32
Peak392 Hz-1.4 dB1.92
Peak8,000 Hz-3.5 dB1.39

Bass target

Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 94 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz+2.3 dB0.70
High shelf10,000 Hz-0.9 dB0.70
Peak23 Hz+2.8 dB1.42
Peak102 Hz-5.1 dB1.26
Peak399 Hz-1.7 dB1.70
Peak3,922 Hz+2.3 dB2.70
Peak8,000 Hz-1.5 dB2.86

Bright target

Set a preamp of -4.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 94 out of 100, up from 25.

FilterFrequencyGainQ
Low shelf105 Hz-10.1 dB0.70
High shelf10,000 Hz+1.2 dB0.70
Peak23 Hz+2.2 dB1.62
Peak98 Hz-5.5 dB1.15
Peak412 Hz-1.7 dB1.74
Peak4,498 Hz+4.3 dB1.35

V-shaped target

Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 92 out of 100, up from 73.

FilterFrequencyGainQ
Low shelf105 Hz+2.9 dB0.70
High shelf10,000 Hz+1.7 dB0.70
Peak23 Hz+2.7 dB1.55
Peak94 Hz-4.7 dB1.73
Peak206 Hz+0.9 dB4.24
Peak490 Hz-1.0 dB1.86
Peak4,448 Hz+4.9 dB1.26

Frequency Response

How the KZ Xtra measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

KZ XtraHarman target
Measured frequency response of the KZ Xtra-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of dhrme, gadgetrytech, hbb and regancipher. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

3 comparisons

More KZ headphones →