KBear Tourbillon Pro Review: Ranked #886 of 1291

Last updated: October 17, 2026

The KBear Tourbillon Pro ranks #886 out of 1291 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: KBEAR

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#886 KBear Tourbillon Pro: $99.00 KeepHiFi $99.00 eBay

Pros: A broadly balanced tuning with a preference score of 66 against the Harman target.

Cons: Treble about 2 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.3 dB standard deviation from target.

Is the KBear Tourbillon Pro right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 2.1 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 23 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $75 less.
BackClosed
ConnectionWired
Deviation From Target2.32 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic driver (PU + PEEK + DLC composite diaphragm)
Form FactorIn-ear
Frequency Response20Hz - 20kHz
Harman Preference Score66 (median of 6 squig.link measurements, calibrated to AutoEQ)
Impedance19 ohms
Sensitivity101 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.5 dB at 30 Hz)
Tonal Tilt-0.89 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 89 out of 100, up from 66.

FilterFrequencyGainQ
Low shelf105 Hz-1.6 dB0.70
Peak32 Hz+0.9 dB1.31
Peak176 Hz-4.5 dB0.78
Peak754 Hz+1.2 dB2.72
Peak5,797 Hz+4.8 dB3.20

Neutral target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 91 out of 100, up from 29.

FilterFrequencyGainQ
Low shelf105 Hz-10.1 dB0.70
Peak174 Hz-4.4 dB0.69
Peak737 Hz+1.2 dB2.26
Peak5,797 Hz+4.8 dB3.19

Studio flat target

Set a preamp of -3.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 9.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak170 Hz-6.4 dB0.71
Peak2,510 Hz+1.9 dB4.90
Peak5,345 Hz+2.0 dB0.40

Warm target

Set a preamp of -3.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 93 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz-1.3 dB0.70
High shelf10,000 Hz-3.8 dB0.70
Peak32 Hz+0.8 dB1.43
Peak86 Hz-0.6 dB2.38
Peak174 Hz-4.3 dB0.80
Peak747 Hz+1.4 dB2.79
Peak1,600 Hz-0.8 dB2.88
Peak3,893 Hz-1.0 dB1.38
Peak6,053 Hz+3.6 dB5.83

Bass target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 91 out of 100, up from 73.

FilterFrequencyGainQ
Low shelf105 Hz+2.2 dB0.70
Peak30 Hz+1.1 dB1.19
Peak179 Hz-4.5 dB0.81
Peak756 Hz+1.2 dB2.78
Peak5,798 Hz+4.8 dB3.20

Bright target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 83 out of 100, up from 17.

FilterFrequencyGainQ
Low shelf105 Hz-10.1 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak174 Hz-4.4 dB0.67
Peak732 Hz+1.2 dB2.31
Peak5,291 Hz+5.7 dB1.95

V-shaped target

Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 79 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+2.9 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak174 Hz-3.1 dB0.83
Peak5,101 Hz+5.5 dB1.52

Frequency Response

How the KBear Tourbillon Pro measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 6 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

KBear Tourbillon ProHarman target
Measured frequency response of the KBear Tourbillon Pro-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 6 measurements from the squig.link databases of audioamigo, eplv, practiphile, pw, soundcheck39 and tonedeafmonk. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

3 comparisons

More KBEAR headphones →