Name: Joyodio VZ10
Brand: Joyodio

The Joyodio VZ10 ranks #517 out of 1084 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Joyodio VZ10 - ranked #517 of 1084 In-Ear Headphones · Editor's rating 3.8/5

#517 Joyodio VZ10 eBay

Pros: A budget hybrid with a dynamic driver, four balanced armatures and eight tuning switches. It measures reasonably close to the Harman target (score 71 across three measurements).

Cons: No current new listing was found, so it is mainly found used. Treble sits about 3.7 dB below target, a dark, relaxed balance. Bass sits about 2.1 dB below target, so it sounds lean. Sub-bass falls about 3.2 dB short at 30 Hz. A 2.50 dB spread from the target shows peaks and dips that better tuned sets avoid. Its score rests on three measurements.

Released	2023 (3 years ago)
Back	Closed
Connection	Wired
Deviation From Target	2.50 dB standard deviation
Driver Type	Hybrid
Drivers	1 x 7mm dynamic + 4 x balanced armature
Form Factor	In-ear
Harman Preference Score	71 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance	12 ohms
Sensitivity	108 dB/mW
Sub-bass Extension	Within 6 dB of target down to 20 Hz (-3.2 dB at 30 Hz)
Tonal Tilt	-0.14 (negative is warmer, positive brighter)

EQ Presets

Target sound

Harman target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 78 out of 100, up from 71.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	+3.1 dB	0.70
High shelf	10,000 Hz	+1.3 dB	0.70
Peak	26 Hz	+0.8 dB	1.20
Peak	129 Hz	-1.6 dB	1.02
Peak	566 Hz	+1.0 dB	2.16
Peak	1,317 Hz	-0.9 dB	3.32
Peak	2,498 Hz	-0.5 dB	0.80
Peak	3,782 Hz	+1.4 dB	6.00
Peak	5,345 Hz	+3.3 dB	1.22

Neutral target

Set a preamp of -3.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 80 out of 100, up from 47.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	-5.4 dB	0.70
High shelf	10,000 Hz	+1.3 dB	0.70
Peak	114 Hz	-1.8 dB	0.85
Peak	561 Hz	+1.1 dB	2.10
Peak	1,317 Hz	-0.9 dB	3.32
Peak	2,498 Hz	-0.5 dB	0.82
Peak	3,782 Hz	+1.4 dB	6.00
Peak	5,345 Hz	+3.4 dB	1.22

Studio flat target

Set a preamp of -3.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 74 out of 100, up from 28.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	-8.0 dB	0.70
High shelf	10,000 Hz	+2.0 dB	0.70
Peak	156 Hz	-3.5 dB	0.83
Peak	1,352 Hz	-1.2 dB	3.47
Peak	2,347 Hz	+1.1 dB	6.00
Peak	3,689 Hz	+3.1 dB	1.01
Peak	6,109 Hz	+1.4 dB	6.00

Warm target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 83 out of 100, up from 75.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	+3.3 dB	0.70
High shelf	10,000 Hz	-0.9 dB	0.70
Peak	26 Hz	+0.8 dB	1.16
Peak	117 Hz	-1.4 dB	1.18
Peak	585 Hz	+1.2 dB	1.73
Peak	1,498 Hz	-1.3 dB	3.42
Peak	2,623 Hz	-1.5 dB	3.87
Peak	3,881 Hz	+1.8 dB	5.88
Peak	6,205 Hz	+2.4 dB	3.37

Bass target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 78 out of 100, up from 61.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	+5.8 dB	0.70
High shelf	10,000 Hz	+1.3 dB	0.70
Peak	5,345 Hz	+3.3 dB	1.22

Bright target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 66 out of 100, up from 34.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	-5.5 dB	0.70
High shelf	10,000 Hz	+2.0 dB	0.70
Peak	5,016 Hz	+5.9 dB	1.47

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 68 out of 100, up from 55.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	+5.9 dB	0.70
High shelf	10,000 Hz	+2.0 dB	0.70
Peak	4,708 Hz	+6.0 dB	1.35

Search eBay for Joyodio VZ10 →

Reviews, Comparisons and Sound Samples
- Frequency response measurements of the Joyodio VZ10 by 3 squig.link measurers

Frequency Response

How the Joyodio VZ10 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Joyodio VZ10Harman target

Measurement data: median of 3 measurements from the squig.link databases of cammyfi, ianfann and pw. Thanks to each of them for publishing their work.