Jabra Evolve2 Buds Review: Ranked #26 of 1448

Last updated: October 20, 2026

The Jabra Evolve2 Buds ranks #26 out of 1448 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Jabra

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#26 Jabra Evolve2 Buds: $351.99 TWS Amazon $351.99 eBay

Pros: Business earbuds with ANC and IP57 protection whose preference score of 84 puts them among the best measured true wireless sets. Deviation is a low 1.33 dB, and sub bass through the midrange stays within 1.5 dB of target, so voices on calls and music both sound natural. Battery life is 8 hours, 33 with the case, with SBC and AAC.

Cons: A 4.8 dB peak near 7.3 kHz next to a 4.6 dB dip near 8.9 kHz can make sibilants a little uneven. They cost far more than the QCY HT05 MeloBuds ANC, which scores just as well, and the score rests on a single measurement.

Is the Jabra Evolve2 Buds right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 84).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you want noise cancelling for commutes or flights.
Active Noise CancellingYes
BackClosed
Battery Life8 hours (33 with case)
Bluetooth CodecsSBC, AAC
Bluetooth Version5.2
Built-in MicrophoneYes
ConnectionTrue wireless
Deviation From Target1.33 dB standard deviation
Drivers1 x 6mm speaker
Form FactorIn-ear
Frequency Response20Hz - 20kHz (Manufacturer specified)
Harman Preference Score84 (1 squig.link measurement, calibrated to AutoEQ)
IP RatingIP57
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.1 dB at 30 Hz)
Tonal Tilt-0.01 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -1.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 84.

FilterFrequencyGainQ
High shelf10,000 Hz-4.7 dB0.70
Peak40 Hz+1.5 dB3.36
Peak74 Hz-1.1 dB4.06
Peak238 Hz-2.4 dB0.92
Peak3,516 Hz+1.7 dB4.19
Peak6,452 Hz-2.8 dB3.73

Neutral target

Set a preamp of -1.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 50.

FilterFrequencyGainQ
Low shelf105 Hz-8.4 dB0.70
High shelf10,000 Hz-4.7 dB0.70
Peak72 Hz-1.3 dB4.91
Peak208 Hz-2.1 dB0.64
Peak3,513 Hz+1.7 dB4.13
Peak6,452 Hz-2.8 dB3.74

Studio flat target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 29.

FilterFrequencyGainQ
Low shelf105 Hz-10.9 dB0.70
High shelf10,000 Hz+1.1 dB0.70
Peak23 Hz-1.2 dB3.03
Peak205 Hz-4.0 dB0.71
Peak372 Hz-0.9 dB3.79
Peak749 Hz+0.9 dB3.38
Peak2,836 Hz+3.2 dB1.96
Peak4,987 Hz-2.1 dB6.00
Peak6,150 Hz-4.5 dB3.24

Warm target

Set a preamp of -1.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 91 out of 100, up from 80.

FilterFrequencyGainQ
Low shelf105 Hz+0.3 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak40 Hz+1.4 dB3.57
Peak74 Hz-1.2 dB4.00
Peak233 Hz-2.1 dB0.99
Peak759 Hz+1.1 dB3.12
Peak2,408 Hz-1.0 dB4.80
Peak6,334 Hz-4.7 dB1.56

Bass target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+3.9 dB0.70
High shelf10,000 Hz-4.7 dB0.70
Peak40 Hz+1.6 dB3.12
Peak240 Hz-2.4 dB0.95
Peak3,517 Hz+1.7 dB4.20
Peak6,451 Hz-2.8 dB3.72

Bright target

Set a preamp of -3.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 87 out of 100, up from 41.

FilterFrequencyGainQ
Low shelf105 Hz-8.5 dB0.70
High shelf10,000 Hz-0.8 dB0.70
Peak23 Hz-1.3 dB3.46
Peak42 Hz+1.1 dB4.34
Peak73 Hz-1.3 dB4.98
Peak214 Hz-2.2 dB0.64
Peak738 Hz+0.9 dB3.29
Peak3,907 Hz+2.9 dB1.80
Peak7,920 Hz+2.0 dB6.00

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 83 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz+4.6 dB0.70
High shelf10,000 Hz+0.5 dB0.70
Peak40 Hz+1.5 dB3.43
Peak4,031 Hz+3.2 dB1.23

Frequency Response

How the Jabra Evolve2 Buds measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Jabra Evolve2 BudsHarman target
Measured frequency response of the Jabra Evolve2 Buds-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of filk. Thanks to them for publishing their work.

More Jabra headphones →