ISN H60 Review: Ranked #541 of 1253

Last updated: October 16, 2026

The ISN H60 ranks #541 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

ISN H60 - ranked #541 of 1253 In-Ear Headphones · Editor's rating 3.9/5

#541 ISN H60: $349 eBay

Pros: A broadly balanced tuning with a preference score of 72 against the Harman target.

Cons: Treble about 4 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.1 dB standard deviation from target.

Is the ISN H60 right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 3.8 dB below target).
  • you are happy to use EQ: our preset lifts its Harman match by about 18 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $325 less.
BackClosed
ConnectionWired
Deviation From Target2.13 dB standard deviation
Driver TypeHybrid (4 dynamic + 6 balanced armature)
Drivers4 x dynamic + 6 x balanced armature
Form FactorIn-ear
Harman Preference Score72 (median of 4 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-2.6 dB at 30 Hz)
Tonal Tilt-0.34 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz+2.2 dB0.70
High shelf10,000 Hz-3.4 dB0.70
Peak164 Hz-1.8 dB0.92
Peak1,222 Hz-2.4 dB3.23
Peak2,975 Hz+2.5 dB2.77
Peak5,016 Hz+5.1 dB0.58
Peak6,792 Hz-2.2 dB5.43

Neutral target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 43.

FilterFrequencyGainQ
Low shelf105 Hz-6.4 dB0.70
High shelf10,000 Hz-3.4 dB0.70
Peak133 Hz-1.9 dB0.78
Peak1,223 Hz-2.4 dB3.24
Peak2,975 Hz+2.5 dB2.77
Peak5,016 Hz+5.1 dB0.58
Peak6,793 Hz-2.2 dB5.43

Studio flat target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 23.

FilterFrequencyGainQ
Low shelf105 Hz-9.0 dB0.70
High shelf10,000 Hz+1.7 dB0.70
Peak168 Hz-3.6 dB0.76
Peak1,256 Hz-2.3 dB2.66
Peak2,773 Hz+6.0 dB1.18
Peak3,713 Hz+2.1 dB6.00
Peak5,569 Hz+3.2 dB4.69

Warm target

Set a preamp of -4.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 80.

FilterFrequencyGainQ
Low shelf105 Hz+2.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak139 Hz-1.6 dB1.03
Peak1,275 Hz-2.0 dB3.27
Peak3,454 Hz+4.5 dB1.21
Peak5,653 Hz+2.3 dB6.00

Bass target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 91 out of 100, up from 66.

FilterFrequencyGainQ
Low shelf105 Hz+5.6 dB0.70
High shelf10,000 Hz-3.5 dB0.70
Peak43 Hz+0.8 dB1.83
Peak174 Hz-1.8 dB1.14
Peak1,223 Hz-2.4 dB3.18
Peak2,973 Hz+2.5 dB2.77
Peak5,016 Hz+5.1 dB0.58
Peak6,769 Hz-2.2 dB5.68

Bright target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 86 out of 100, up from 31.

FilterFrequencyGainQ
Low shelf105 Hz-6.4 dB0.70
High shelf10,000 Hz-0.6 dB0.70
Peak132 Hz-2.0 dB0.76
Peak1,236 Hz-2.4 dB2.39
Peak2,970 Hz+2.6 dB2.85
Peak5,345 Hz+5.6 dB0.53
Peak7,014 Hz-3.7 dB5.30

V-shaped target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 83 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+5.8 dB0.70
Peak52 Hz+0.7 dB2.18
Peak422 Hz+1.1 dB2.64
Peak1,196 Hz-2.9 dB3.24
Peak1,507 Hz-1.0 dB4.13
Peak2,825 Hz+2.6 dB2.08
Peak5,345 Hz+5.6 dB0.50
Peak7,038 Hz-3.9 dB5.14

Frequency Response

How the ISN H60 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

ISN H60Harman target
Measured frequency response of the ISN H60-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of avishai, flare, theaudiostore and treblewellxtended. Thanks to each of them for publishing their work.