ISN Audio Neo 5 Review: Ranked #855 of 1291

Last updated: October 17, 2026

The ISN Audio Neo 5 ranks #855 out of 1291 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: ISN Audio

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#855 ISN Audio Neo 5: $289.00 Penon Audio $289.00 eBay

Pros: A broadly balanced tuning with a preference score of 67 against the Harman target.

Cons: Treble about 4 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.3 dB standard deviation from target.

Is the ISN Audio Neo 5 right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 3.6 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 25 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $265 less.
BackClosed
ConnectionWired
Deviation From Target2.28 dB standard deviation
Driver TypeHybrid
Drivers1 DD + 4 BA (1 x 10mm dynamic driver + 4 Knowles balanced armature)
Form FactorIn-ear
Frequency Response10Hz - 20kHz
Harman Preference Score67 (median of 5 squig.link measurements, calibrated to AutoEQ)
Impedance26 ohms
Sensitivity110 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.1 dB at 30 Hz)
Tonal Tilt-0.92 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 92 out of 100, up from 67.

FilterFrequencyGainQ
Low shelf105 Hz-0.8 dB0.70
High shelf10,000 Hz-3.3 dB0.70
Peak36 Hz+0.6 dB1.34
Peak145 Hz-3.0 dB0.85
Peak1,358 Hz-0.9 dB2.03
Peak3,101 Hz+2.1 dB5.40
Peak4,708 Hz+4.3 dB0.69

Neutral target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 93 out of 100, up from 29.

FilterFrequencyGainQ
Low shelf105 Hz-9.4 dB0.70
High shelf10,000 Hz-3.3 dB0.70
Peak135 Hz-3.0 dB0.73
Peak1,364 Hz-0.9 dB2.12
Peak3,100 Hz+2.1 dB5.38
Peak4,708 Hz+4.3 dB0.69

Studio flat target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 8.

FilterFrequencyGainQ
Low shelf105 Hz-11.8 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak157 Hz-4.6 dB0.69
Peak2,526 Hz+1.1 dB6.00
Peak3,071 Hz+6.0 dB1.38
Peak4,379 Hz-1.5 dB6.00
Peak5,848 Hz+1.8 dB3.89

Warm target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 93 out of 100, up from 79.

FilterFrequencyGainQ
Low shelf105 Hz-0.6 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak140 Hz-2.9 dB0.95
Peak3,807 Hz+2.7 dB0.85
Peak6,626 Hz+1.5 dB4.40

Bass target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 93 out of 100, up from 74.

FilterFrequencyGainQ
Low shelf105 Hz+2.9 dB0.70
High shelf10,000 Hz-3.3 dB0.70
Peak36 Hz+0.9 dB1.22
Peak150 Hz-3.0 dB0.92
Peak1,354 Hz-0.9 dB1.96
Peak3,101 Hz+2.1 dB5.41
Peak4,708 Hz+4.3 dB0.69

Bright target

Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 83 out of 100, up from 16.

FilterFrequencyGainQ
Low shelf105 Hz-9.4 dB0.70
Peak136 Hz-3.0 dB0.69
Peak1,546 Hz-1.2 dB1.37
Peak3,573 Hz+6.0 dB1.00
Peak5,634 Hz+3.5 dB5.32

V-shaped target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 79 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+3.6 dB0.70
High shelf10,000 Hz+1.2 dB0.70
Peak36 Hz+0.7 dB1.31
Peak127 Hz-2.0 dB1.27
Peak1,296 Hz-1.5 dB1.61
Peak3,573 Hz+6.0 dB0.95
Peak5,578 Hz+3.2 dB5.22

Frequency Response

How the ISN Audio Neo 5 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 5 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

ISN Audio Neo 5Harman target
Measured frequency response of the ISN Audio Neo 5-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 5 measurements from the squig.link databases of dl, iemocean, isaiahse, soundignity and tonedeafmonk. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

4 comparisons

More ISN Audio headphones →