Final Audio ZE3000 Review: Ranked #1092 of 1398

Last updated: October 20, 2026

The Final Audio ZE3000 ranks #1092 out of 1398 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Final Audio

Prices on this page were last checked October 19, 2026 at 10:32 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Final Audio ZE3000 - ranked #1092 of 1398 In-Ear Headphones · Editor's rating 3/5

#1092 Final Audio ZE3000: $149.00 TWS Discontinued eBay

Pros: Compact true wireless earbuds with aptX Adaptive, IPX4 water resistance and a rated 7 hours per charge or 35 with the case, whose overall tonal tilt is close to neutral with the bass and treble balance near target.

Cons: Sub bass sits about 4.6 dB below target while upper bass is about 4.6 dB above it, so the low end sounds thick rather than deep, and presence is about 3 dB low with a dip near 4.1 kHz. It has no ANC and is discontinued.

Is the Final Audio ZE3000 right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 30 points.

Skip it if

  • you want to buy it new: it is discontinued.
ReleasedDec 2021 (4 years ago)
Active Noise CancellingNo
BackClosed
Battery Life7 hours (35 hours with case)
Bluetooth CodecsSBC, AAC, aptX, aptX Adaptive
Bluetooth Version5.2
ConnectionTrue wireless
Deviation From Target3.17 dB standard deviation
Driver TypeDynamic
Drivers1 x 6mm dynamic (f-Core for Wireless)
Form FactorIn-ear
Harman Preference Score62 (median of 3 squig.link measurements, calibrated to AutoEQ)
IP RatingIPX4
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-5.5 dB at 30 Hz)
Tonal Tilt+0.15 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 92 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+2.4 dB0.70
High shelf10,000 Hz-5.4 dB0.70
Peak23 Hz+2.9 dB1.89
Peak79 Hz-1.3 dB1.62
Peak211 Hz-6.3 dB0.67
Peak1,072 Hz+1.0 dB0.71
Peak4,000 Hz+4.7 dB2.06
Peak7,455 Hz-3.6 dB4.43

Neutral target

Set a preamp of -4.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 93 out of 100, up from 47.

FilterFrequencyGainQ
Low shelf105 Hz-6.1 dB0.70
High shelf10,000 Hz-5.4 dB0.70
Peak23 Hz+2.4 dB1.94
Peak183 Hz-6.3 dB0.62
Peak1,708 Hz+0.8 dB0.75
Peak4,006 Hz+4.7 dB2.09
Peak7,456 Hz-3.6 dB4.45

Studio flat target

Set a preamp of -4.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 94 out of 100, up from 28.

FilterFrequencyGainQ
Low shelf105 Hz-8.7 dB0.70
High shelf10,000 Hz+0.6 dB0.70
Peak23 Hz+2.1 dB2.11
Peak188 Hz-8.2 dB0.67
Peak373 Hz-1.2 dB3.15
Peak1,871 Hz+1.1 dB2.29
Peak3,219 Hz+4.6 dB1.37
Peak4,313 Hz+1.3 dB4.67
Peak7,148 Hz-4.2 dB3.11

Warm target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 60.

FilterFrequencyGainQ
Low shelf105 Hz+2.6 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.9 dB1.88
Peak211 Hz-6.0 dB0.67
Peak4,051 Hz+3.0 dB2.90
Peak7,418 Hz-6.0 dB4.33

Bass target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 48.

FilterFrequencyGainQ
Low shelf105 Hz+5.1 dB0.70
High shelf10,000 Hz-5.4 dB0.70
Peak38 Hz+1.6 dB1.66
Peak119 Hz-1.0 dB2.30
Peak211 Hz-6.3 dB0.75
Peak1,708 Hz+0.8 dB0.74
Peak4,009 Hz+4.7 dB2.11
Peak7,457 Hz-3.6 dB4.45

Bright target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 92 out of 100, up from 37.

FilterFrequencyGainQ
Low shelf105 Hz-6.2 dB0.70
High shelf10,000 Hz-1.9 dB0.70
Peak23 Hz+2.5 dB1.87
Peak186 Hz-6.3 dB0.60
Peak4,350 Hz+6.0 dB1.38

V-shaped target

Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 88 out of 100, up from 52.

FilterFrequencyGainQ
Low shelf105 Hz+5.4 dB0.70
High shelf10,000 Hz-0.8 dB0.70
Peak41 Hz+1.2 dB1.48
Peak213 Hz-4.8 dB0.73
Peak3,219 Hz+0.8 dB0.92
Peak4,708 Hz+6.0 dB1.09
Peak6,982 Hz-1.5 dB4.62

Frequency Response

How the Final Audio ZE3000 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Final Audio ZE3000Harman target
Measured frequency response of the Final Audio ZE3000-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of arn, kazi and vsg. Thanks to each of them for publishing their work.

More Final Audio headphones →