Coverage note. Speaker Ranking currently covers 2 Final Audio models across headphones. These are the products in our database, not a complete list of everything Final Audio makes.
What this page covers. The Final Audio models ranked here span headphones, including Final Audio A4000 and Final Audio E3000. Use each model’s category position to compare it with alternatives of the same size and use case.
This page lists all 2 Final Audio speakers ranked on this site across headphones. Each model is shown in the category where it competes, with its current rank and the size of that ranking.
Use the category position rather than the brand name alone: speakers from the same manufacturer can perform very differently by size, price and product family.
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
In-Ear Headphones
Ranked #6 of 68 in In-Ear Headphones - Final Audio A4000: $119.00 Amazon eBay
Pros: A Harman score of 80 shows it sits close to the target most listeners prefer, with a slightly bright tilt in crinacle’s measurement. It uses a compact 6 mm dynamic driver and weighs 18 g, so it is light in the ear. The 18 ohm impedance and 100 dB per mW sensitivity are manageable from a phone.
Cons: The 100 dB per mW sensitivity is lower than many in-ears, so it needs more volume from weak sources. No built-in microphone is offered, which limits it for calls. It is wired only, so it lacks the wireless convenience of the Sony WF-1000XM5, which has a lower rating.
Full Final Audio A4000 review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.67 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 6mm dynamic |
| Form Factor | In-ear |
| Harman Preference Score | 80 (measured by crinacle, via AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 100 dB/mW |
| Tonal Tilt | +0.11 (negative is warmer, positive brighter) |
| Weight | 0 lbs (18 g) |
EQ preset to match the Harman target
Set a preamp of -2.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.5 dB | 0.70 |
| Peak | 831 Hz | +3.0 dB | 1.09 |
| Peak | 177 Hz | -1.6 dB | 1.02 |
| Peak | 6,348 Hz | -3.7 dB | 2.04 |
| Peak | 2,022 Hz | +2.0 dB | 3.11 |
| High shelf | 10,000 Hz | -3.9 dB | 0.70 |
| Peak | 9,639 Hz | +2.1 dB | 2.54 |
| Peak | 3,246 Hz | -2.0 dB | 3.75 |
| Peak | 4,630 Hz | +0.9 dB | 3.78 |
| Peak | 2,482 Hz | +0.9 dB | 5.02 |
- Reviews, Comparisons and Sound Samples
Ranked #64 of 68 in In-Ear Headphones - Final Audio E3000: $46.60 Amazon eBay
Pros: Bass at 60 to 200 Hz sits about 5.5 dB above the Harman target in oratory1990’s measurement, and the low mids are lifted about 3.2 dB, giving a warm, full and weighty sound. Treble from 6 to 10 kHz is only 1.6 dB over target, so highs stay fairly gentle and non-fatiguing. The single 6.4mm dynamic driver is easy to drive at 16 ohms and 100 dB/mW, and the price is low.
Cons: The strong bass and low mid lift can muddy vocals, and presence from 3 to 6 kHz is down about 3 dB with a 3.7 dB dip near 4.5 kHz, so voices lack clarity. A preference score of 57 with a 3.4 dB deviation shows the balance is far from target. The KZ AS10, KZ DQ6S and SoundMAGIC E50C are all rated higher.
Full Final Audio E3000 review and specifications →
| Released | 2017 (9 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 3.40 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 6.4mm dynamic |
| Form Factor | In-ear |
| Harman Preference Score | 57 (measured by oratory1990, via AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 100 dB/mW |
| Tonal Tilt | -0.57 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +14.3 dB | 0.70 |
| Peak | 53 Hz | -13.7 dB | 0.28 |
| Peak | 5,187 Hz | +4.0 dB | 1.54 |
| Peak | 1,381 Hz | +2.9 dB | 0.32 |
| Peak | 6,770 Hz | -2.0 dB | 1.49 |
| High shelf | 10,000 Hz | +0.3 dB | 0.70 |
| Peak | 1,242 Hz | -0.9 dB | 2.59 |
| Peak | 810 Hz | +0.7 dB | 2.40 |
| Peak | 361 Hz | -0.2 dB | 1.45 |
| Peak | 2,087 Hz | +0.5 dB | 3.04 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons