FAAEAL Tulip Review: Ranked #620 of 1084

Last updated: October 15, 2026

The FAAEAL Tulip ranks #620 out of 1084 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#620 FAAEAL Tulip: $107.00 Amazon $107.00 eBay

Pros: A single 10mm dynamic IEM with a bass-heavy, Harman-like tuning and full sub-bass to 20 Hz (score 69 across four measurements).

Cons: Treble sits about 3.1 dB above target, so it can sound bright. Bass sits about 4.1 dB above target, a bass heavy balance.

Is the FAAEAL Tulip right for you?

Buy it if

  • you like extra bass (about +4 dB below 150 Hz versus the target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 21 points.

Skip it if

  • you are treble-sensitive (treble sits about 3.1 dB above target).
  • you want the best value: the higher-rated EPZ G10 costs about $83 less.
BackClosed
ConnectionWired
Deviation From Target2.17 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic
Form FactorIn-ear
Harman Preference Score69 (median of 4 squig.link measurements, calibrated to AutoEQ)
Impedance14 ohms
Sensitivity110 dB +/-3 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+2.5 dB at 30 Hz)
Tonal Tilt-0.53 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -0.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz-3.7 dB0.70
High shelf10,000 Hz-2.8 dB0.70
Peak187 Hz-4.9 dB0.77
Peak1,878 Hz+1.2 dB1.84
Peak3,105 Hz-1.3 dB6.00
Peak4,574 Hz-6.0 dB2.01
Peak6,072 Hz+1.5 dB6.00
Peak7,690 Hz-1.9 dB6.00

Neutral target

Set a preamp of -0.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 91 out of 100, up from 30.

FilterFrequencyGainQ
Low shelf105 Hz-11.9 dB0.70
High shelf10,000 Hz-2.8 dB0.70
Peak174 Hz-4.7 dB0.63
Peak774 Hz+0.8 dB2.95
Peak1,820 Hz+1.0 dB1.36
Peak3,106 Hz-1.3 dB6.00
Peak4,574 Hz-6.0 dB2.02
Peak6,072 Hz+1.5 dB6.00
Peak7,690 Hz-1.9 dB6.00

Studio flat target

Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 81 out of 100, up from 11.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+0.8 dB0.70
Peak169 Hz-7.1 dB0.68
Peak2,201 Hz+2.9 dB2.51
Peak3,556 Hz-1.2 dB4.95
Peak4,835 Hz-8.3 dB2.95
Peak7,556 Hz-1.8 dB6.00

Warm target

Set a preamp of -0.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz-3.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak183 Hz-4.7 dB0.80
Peak4,627 Hz-7.5 dB1.36
Peak6,074 Hz+1.9 dB6.00
Peak7,787 Hz-2.3 dB6.00

Bass target

Set a preamp of -0.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 75.

FilterFrequencyGainQ
High shelf10,000 Hz-2.8 dB0.70
Peak192 Hz-4.9 dB0.82
Peak4,574 Hz-6.0 dB2.01

Bright target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 88 out of 100, up from 23.

FilterFrequencyGainQ
Low shelf105 Hz-11.9 dB0.70
Peak174 Hz-4.7 dB0.62
Peak783 Hz+0.8 dB2.62
Peak1,885 Hz+1.1 dB2.14
Peak3,222 Hz-2.0 dB5.12
Peak4,585 Hz-4.1 dB4.51
Peak6,231 Hz+3.3 dB6.00

V-shaped target

Set a preamp of -3.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 88 out of 100, up from 75.

FilterFrequencyGainQ
Low shelf105 Hz+0.8 dB0.70
High shelf10,000 Hz+0.8 dB0.70
Peak38 Hz+0.7 dB1.68
Peak184 Hz-3.5 dB0.80
Peak2,022 Hz+1.7 dB3.96
Peak3,210 Hz-1.5 dB5.31
Peak4,650 Hz-3.8 dB4.69
Peak6,522 Hz+2.6 dB5.32
Peak8,000 Hz+1.1 dB1.48

Frequency Response

How the FAAEAL Tulip measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

FAAEAL TulipHarman target
Measured frequency response of the FAAEAL Tulip-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of audioamigo, jaytiss, obodio and tonedeafmonk. Thanks to each of them for publishing their work.