Elysian Apostle Review: Ranked #550 of 1061

Last updated: October 15, 2026

The Elysian Apostle ranks #550 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Elysian

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#550 Elysian Apostle: $1,799.00 Bloom Audio $1,799.00 eBay

Pros: A tribrid flagship with a dynamic driver, two balanced armatures and two electrostatic tweeters. Measurements show bass right on the Harman target and full sub-bass to 20 Hz (score 70 across three measurements).

Cons: Treble sits about 4.5 dB below target, a dark, relaxed balance. A 2.32 dB spread from the target shows peaks and dips that better tuned sets avoid. It is now sold as the Apostle 2026 with a new shell, and the measurements cover the original. Very expensive for its rating. Its score rests on three measurements.

Is the Elysian Apostle right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 4.5 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 16 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $1,775 less.
BackClosed
ConnectionWired
Deviation From Target2.32 dB standard deviation
Driver TypeTribrid
Drivers1 x dynamic + 2 x balanced armature + 2 x electrostatic
Form FactorIn-ear
Harman Preference Score70 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance10 ohms
Sensitivity97 dB @1kHz
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.0 dB at 30 Hz)
Tonal Tilt-0.51 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 86 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+1.1 dB0.70
High shelf10,000 Hz-1.5 dB0.70
Peak91 Hz-1.0 dB1.35
Peak656 Hz+1.1 dB2.04
Peak1,434 Hz-2.4 dB3.51
Peak2,900 Hz+2.2 dB4.44
Peak4,013 Hz-1.7 dB6.00
Peak5,345 Hz+5.2 dB0.87
Peak6,895 Hz-2.1 dB6.00

Neutral target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 86 out of 100, up from 36.

FilterFrequencyGainQ
Low shelf105 Hz-7.4 dB0.70
High shelf10,000 Hz-1.5 dB0.70
Peak80 Hz-1.4 dB1.13
Peak1,435 Hz-2.4 dB3.51
Peak2,066 Hz+0.4 dB0.40
Peak2,900 Hz+2.2 dB4.44
Peak4,013 Hz-1.7 dB6.00
Peak5,345 Hz+5.2 dB0.87
Peak6,896 Hz-2.1 dB6.00

Studio flat target

Set a preamp of -6.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 89 out of 100, up from 19.

FilterFrequencyGainQ
Low shelf105 Hz-10.0 dB0.70
High shelf10,000 Hz+1.6 dB0.70
Peak144 Hz-2.4 dB0.71
Peak685 Hz+1.0 dB2.97
Peak1,430 Hz-2.9 dB2.73
Peak2,476 Hz+2.2 dB6.00
Peak3,354 Hz+5.5 dB0.94
Peak5,603 Hz+4.0 dB5.62

Warm target

Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 79.

FilterFrequencyGainQ
Low shelf105 Hz+1.4 dB0.70
High shelf10,000 Hz-5.0 dB0.70
Peak660 Hz+1.4 dB1.64
Peak1,468 Hz-2.3 dB3.98
Peak2,937 Hz+2.5 dB4.38
Peak4,088 Hz-1.9 dB6.00
Peak5,419 Hz+6.0 dB2.05

Bass target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 87 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz+4.9 dB0.70
High shelf10,000 Hz-1.5 dB0.70
Peak24 Hz+1.0 dB1.88
Peak91 Hz-0.9 dB1.17
Peak656 Hz+1.1 dB2.02
Peak1,434 Hz-2.4 dB3.51
Peak2,900 Hz+2.2 dB4.44
Peak4,013 Hz-1.7 dB6.00
Peak5,345 Hz+5.2 dB0.87
Peak6,894 Hz-2.1 dB6.00

Bright target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 74 out of 100, up from 24.

FilterFrequencyGainQ
Low shelf105 Hz-7.5 dB0.70
High shelf10,000 Hz+1.2 dB0.70
Peak1,435 Hz-2.6 dB3.40
Peak4,332 Hz+6.0 dB1.00

V-shaped target

Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 75 out of 100, up from 61.

FilterFrequencyGainQ
Low shelf105 Hz+5.4 dB0.70
High shelf10,000 Hz+1.9 dB0.70
Peak341 Hz+1.3 dB0.69
Peak1,429 Hz-3.1 dB2.69
Peak3,573 Hz+6.0 dB1.00
Peak5,554 Hz+3.4 dB5.05

Frequency Response

How the Elysian Apostle measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Elysian ApostleHarman target
Measured frequency response of the Elysian Apostle-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of aden, eliseaudio and smirk. Thanks to each of them for publishing their work.

More Elysian headphones →