EarAcoustic OSHUN-LTD Review: Ranked #504 of 1061

Last updated: October 15, 2026

The EarAcoustic OSHUN-LTD ranks #504 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#504 EarAcoustic OSHUN-LTD: $152.91 Linsoul $152.91 eBay

Pros: A single dynamic IEM with an 8.3mm dual magnet, dual cavity driver. Measurements show full sub-bass to 20 Hz (score 71 across three measurements).

Cons: Its score rests on three measurements.

Is the EarAcoustic OSHUN-LTD right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 16 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $129 less.
Released2026 (this year)
BackClosed
ConnectionWired
Deviation From Target2.10 dB standard deviation
Driver TypeDynamic
Drivers1 x 8.3mm dynamic
Form FactorIn-ear
Harman Preference Score71 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance26 ohms
Sensitivity110 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.1 dB at 30 Hz)
Tonal Tilt-0.44 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz-0.5 dB0.70
Peak171 Hz-3.3 dB0.90
Peak735 Hz+1.3 dB2.51
Peak2,216 Hz-2.7 dB3.25
Peak3,323 Hz+1.7 dB6.00
Peak4,082 Hz+5.6 dB2.73
Peak6,468 Hz+1.6 dB6.00

Neutral target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 90 out of 100, up from 37.

FilterFrequencyGainQ
Low shelf105 Hz-9.0 dB0.70
Peak158 Hz-3.2 dB0.74
Peak726 Hz+1.4 dB2.36
Peak1,549 Hz-0.7 dB2.70
Peak2,219 Hz-2.7 dB3.30
Peak3,323 Hz+1.7 dB6.00
Peak4,082 Hz+5.6 dB2.72
Peak6,468 Hz+1.6 dB6.00

Studio flat target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 20.

FilterFrequencyGainQ
Low shelf105 Hz-11.6 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak171 Hz-5.1 dB0.79
Peak3,644 Hz+5.8 dB2.48

Warm target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 77.

FilterFrequencyGainQ
High shelf10,000 Hz-3.2 dB0.70
Peak161 Hz-3.1 dB0.90
Peak740 Hz+1.6 dB2.20
Peak2,203 Hz-3.3 dB2.74
Peak3,359 Hz+1.8 dB6.00
Peak3,963 Hz+4.0 dB4.70
Peak8,000 Hz-3.4 dB6.00

Bass target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz+3.3 dB0.70
Peak32 Hz+0.8 dB1.23
Peak171 Hz-3.3 dB0.94
Peak741 Hz+1.3 dB2.64
Peak1,539 Hz-0.7 dB2.72
Peak2,214 Hz-2.7 dB3.23
Peak3,323 Hz+1.7 dB6.00
Peak4,082 Hz+5.6 dB2.73
Peak6,468 Hz+1.6 dB6.00

Bright target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 87 out of 100, up from 26.

FilterFrequencyGainQ
Low shelf105 Hz-9.1 dB0.70
High shelf10,000 Hz+1.8 dB0.70
Peak161 Hz-3.2 dB0.74
Peak2,223 Hz-3.0 dB2.92
Peak3,423 Hz+1.5 dB5.85
Peak4,056 Hz+6.0 dB1.72
Peak5,881 Hz+3.2 dB6.00

V-shaped target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 85 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+4.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak161 Hz-2.0 dB1.11
Peak2,143 Hz-2.5 dB2.38
Peak3,355 Hz+1.7 dB6.00
Peak4,056 Hz+6.0 dB1.52
Peak5,819 Hz+3.3 dB6.00

Frequency Response

How the EarAcoustic OSHUN-LTD measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

EarAcoustic OSHUN-LTDHarman target
Measured frequency response of the EarAcoustic OSHUN-LTD-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of audioamigo, joycesreview and theaudiostore. Thanks to each of them for publishing their work.