Custom Art FIBAE 7 Unlimited Review: Ranked #858 of 1291

Last updated: October 17, 2026

The Custom Art FIBAE 7 Unlimited ranks #858 out of 1291 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#858 Custom Art FIBAE 7 Unlimited: $1,620.00 Custom Art $1,620.00 eBay

Pros: A broadly balanced tuning with a preference score of 67 against the Harman target.

Cons: Treble about 2 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.5 dB standard deviation from target.

Is the Custom Art FIBAE 7 Unlimited right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 2.5 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 20 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $1,596 less.
BackClosed
ConnectionWired
Deviation From Target2.49 dB standard deviation
Driver TypeBalanced Armature
Drivers7 x balanced armature (2 sub-low, 1 low-mid, 2 mid-high, 1 high, 1 super high)
Form FactorIn-ear
Frequency Response10Hz - 21kHz
Harman Preference Score67 (median of 4 squig.link measurements, calibrated to AutoEQ)
Impedance12 ohms
Sensitivity122 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-3.2 dB at 30 Hz)
Tonal Tilt-0.42 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 86 out of 100, up from 67.

FilterFrequencyGainQ
Low shelf105 Hz+1.3 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak28 Hz+1.2 dB1.32
Peak193 Hz-4.1 dB0.66
Peak4,268 Hz+4.7 dB1.02

Neutral target

Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 39.

FilterFrequencyGainQ
Low shelf105 Hz-7.2 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak186 Hz-4.1 dB0.59
Peak4,267 Hz+4.7 dB1.02

Studio flat target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 87 out of 100, up from 19.

FilterFrequencyGainQ
Low shelf105 Hz-9.8 dB0.70
High shelf10,000 Hz-0.7 dB0.70
Peak191 Hz-5.9 dB0.64
Peak3,136 Hz+5.7 dB1.24
Peak4,580 Hz+1.8 dB6.00

Warm target

Set a preamp of -2.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 75.

FilterFrequencyGainQ
Low shelf105 Hz+1.6 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak27 Hz+1.1 dB1.40
Peak186 Hz-3.9 dB0.69
Peak818 Hz+0.9 dB3.19
Peak2,695 Hz+1.1 dB3.51
Peak4,148 Hz+2.9 dB1.61
Peak7,679 Hz-2.7 dB6.00

Bass target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+5.1 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak30 Hz+1.3 dB1.26
Peak197 Hz-4.1 dB0.69
Peak4,268 Hz+4.7 dB1.02

Bright target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 86 out of 100, up from 27.

FilterFrequencyGainQ
Low shelf105 Hz-7.2 dB0.70
High shelf10,000 Hz-3.3 dB0.70
Peak186 Hz-4.1 dB0.57
Peak3,258 Hz+1.3 dB1.65
Peak5,345 Hz+5.7 dB0.69
Peak6,883 Hz-2.9 dB6.00

V-shaped target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 83 out of 100, up from 58.

FilterFrequencyGainQ
Low shelf105 Hz+5.5 dB0.70
High shelf10,000 Hz-2.3 dB0.70
Peak38 Hz+1.0 dB1.49
Peak203 Hz-2.7 dB0.64
Peak1,252 Hz-1.1 dB2.78
Peak3,157 Hz+1.7 dB2.08
Peak5,345 Hz+5.7 dB0.61
Peak6,952 Hz-3.3 dB5.76

Frequency Response

How the Custom Art FIBAE 7 Unlimited measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Custom Art FIBAE 7 UnlimitedHarman target
Measured frequency response of the Custom Art FIBAE 7 Unlimited-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of dl, harutohiroki, hbb and precog. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

3 comparisons