Campfire Audio Supermoon Review: Ranked #658 of 1061

Last updated: October 15, 2026

The Campfire Audio Supermoon ranks #658 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Campfire Audio

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#658 Campfire Audio Supermoon: $899.00 Campfire Audio $899.00 eBay

Pros: A 14mm planar magnetic IEM. Measurements show full sub-bass to 20 Hz (score 67 across three measurements).

Cons: Expensive for its rating, and a low 94 dB sensitivity needs more volume. Its score rests on three measurements.

Is the Campfire Audio Supermoon right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 21 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $875 less.
Released2023 (3 years ago)
BackClosed
ConnectionWired
Deviation From Target2.29 dB standard deviation
Driver TypePlanar Magnetic
Drivers1 x 14mm planar magnetic
Form FactorIn-ear
Harman Preference Score67 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance15.5 ohms
Sensitivity94 dB @1kHz
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+2.4 dB at 30 Hz)
Tonal Tilt-0.60 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 67.

FilterFrequencyGainQ
Low shelf105 Hz-2.2 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak167 Hz-3.0 dB1.03
Peak2,101 Hz-4.0 dB3.34
Peak3,239 Hz+2.2 dB6.00
Peak3,984 Hz+5.8 dB2.57

Neutral target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 89 out of 100, up from 29.

FilterFrequencyGainQ
Low shelf105 Hz-10.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak164 Hz-2.9 dB0.85
Peak2,102 Hz-4.0 dB3.34
Peak3,239 Hz+2.2 dB6.00
Peak3,984 Hz+5.8 dB2.56

Studio flat target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 14.

FilterFrequencyGainQ
Low shelf105 Hz-11.9 dB0.70
Peak156 Hz-4.9 dB0.74
Peak719 Hz+1.5 dB2.31
Peak2,009 Hz-2.6 dB4.07
Peak2,993 Hz+1.8 dB5.23
Peak3,528 Hz+6.0 dB2.58
Peak7,675 Hz-2.0 dB6.00

Warm target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz-1.9 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak164 Hz-2.8 dB1.07
Peak707 Hz+1.8 dB2.16
Peak1,625 Hz-1.4 dB3.16
Peak2,097 Hz-4.6 dB3.95
Peak2,429 Hz-1.2 dB6.00
Peak3,747 Hz+4.3 dB3.07
Peak7,633 Hz-4.1 dB6.00

Bass target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 74.

FilterFrequencyGainQ
Low shelf105 Hz+1.6 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak171 Hz-3.0 dB1.09
Peak2,101 Hz-4.0 dB3.33
Peak3,239 Hz+2.2 dB6.00
Peak3,983 Hz+5.8 dB2.57

Bright target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 92 out of 100, up from 21.

FilterFrequencyGainQ
Low shelf105 Hz-10.7 dB0.70
High shelf10,000 Hz-2.8 dB0.70
Peak164 Hz-2.9 dB0.82
Peak688 Hz+1.5 dB2.13
Peak1,567 Hz-1.0 dB3.13
Peak2,081 Hz-4.2 dB3.50
Peak3,383 Hz+3.2 dB4.64
Peak4,567 Hz+6.0 dB1.42
Peak5,739 Hz+1.5 dB6.00

V-shaped target

Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 87 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+2.3 dB0.70
High shelf10,000 Hz-1.3 dB0.70
Peak2,030 Hz-3.6 dB3.54
Peak3,371 Hz+3.7 dB4.19
Peak5,016 Hz+6.0 dB1.20

Frequency Response

How the Campfire Audio Supermoon measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Campfire Audio SupermoonHarman target
Measured frequency response of the Campfire Audio Supermoon-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of bloomaudio, dchpgall and eliseaudio. Thanks to each of them for publishing their work.

More Campfire Audio headphones →