The BGVP Melody ranks #907 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: BGVP
Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#907 BGVP Melody: 07.99 Amazon eBay
Pros: A broadly balanced tuning with a preference score of 66 against the Harman target. About 3 dB more bass than the Harman target below 150 Hz, for listeners who want a fuller low end.
Cons: An uneven response, 2.5 dB standard deviation from target.
Is the BGVP Melody right for you?
Buy it if
- you like extra bass (about +3 dB below 150 Hz versus the target).
- you want sub-bass rumble that reaches down to 20 Hz.
- you are happy to use EQ: our preset lifts its Harman match by about 22 points.
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.46 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 12mm Lilin03 carbon crystal PU dynamic driver |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz |
| Harman Preference Score | 66 (median of 3 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 106 dB SPL/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.0 dB at 30 Hz) |
| Tonal Tilt | -0.66 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -1.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 66.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -2.0 dB | 0.70 |
| High shelf | 10,000 Hz | +0.3 dB | 0.70 |
| Peak | 30 Hz | +1.1 dB | 1.20 |
| Peak | 187 Hz | -6.1 dB | 0.72 |
| Peak | 918 Hz | +1.2 dB | 1.83 |
| Peak | 2,823 Hz | -1.3 dB | 3.78 |
| Peak | 4,806 Hz | -4.3 dB | 6.00 |
| Peak | 6,146 Hz | +2.0 dB | 5.24 |
Neutral target
Set a preamp of -1.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 90 out of 100, up from 32.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.5 dB | 0.70 |
| High shelf | 10,000 Hz | +0.3 dB | 0.70 |
| Peak | 186 Hz | -6.0 dB | 0.65 |
| Peak | 877 Hz | +1.4 dB | 1.89 |
| Peak | 2,826 Hz | -1.3 dB | 3.13 |
| Peak | 4,806 Hz | -4.3 dB | 6.00 |
| Peak | 6,146 Hz | +2.0 dB | 5.23 |
Studio flat target
Set a preamp of -2.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 87 out of 100, up from 11.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -12.0 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 180 Hz | -8.1 dB | 0.69 |
| Peak | 366 Hz | -1.0 dB | 2.91 |
| Peak | 864 Hz | +1.0 dB | 2.95 |
| Peak | 2,066 Hz | +1.5 dB | 1.06 |
| Peak | 4,180 Hz | -1.5 dB | 6.00 |
| Peak | 4,862 Hz | -5.9 dB | 6.00 |
| Peak | 6,266 Hz | +2.0 dB | 5.86 |
Warm target
Set a preamp of -1.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 73.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.8 dB | 0.70 |
| High shelf | 10,000 Hz | -1.8 dB | 0.70 |
| Peak | 30 Hz | +1.1 dB | 1.22 |
| Peak | 184 Hz | -5.9 dB | 0.75 |
| Peak | 890 Hz | +1.6 dB | 2.23 |
| Peak | 2,578 Hz | -1.5 dB | 5.46 |
| Peak | 4,419 Hz | -4.4 dB | 1.49 |
| Peak | 6,111 Hz | +2.4 dB | 6.00 |
| Peak | 7,843 Hz | -2.5 dB | 6.00 |
Bass target
Set a preamp of -2.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 70.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.8 dB | 0.70 |
| High shelf | 10,000 Hz | +0.3 dB | 0.70 |
| Peak | 30 Hz | +1.3 dB | 1.16 |
| Peak | 189 Hz | -6.1 dB | 0.74 |
| Peak | 919 Hz | +1.2 dB | 1.85 |
| Peak | 2,823 Hz | -1.3 dB | 3.75 |
| Peak | 4,806 Hz | -4.3 dB | 6.00 |
| Peak | 6,146 Hz | +2.0 dB | 5.25 |
Bright target
Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 84 out of 100, up from 21.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.6 dB | 0.70 |
| High shelf | 10,000 Hz | +1.8 dB | 0.70 |
| Peak | 186 Hz | -6.1 dB | 0.66 |
| Peak | 5,971 Hz | +5.2 dB | 6.00 |
V-shaped target
Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 82 out of 100, up from 64.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.4 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 186 Hz | -4.8 dB | 0.75 |
| Peak | 3,560 Hz | +1.4 dB | 5.29 |
| Peak | 5,909 Hz | +5.8 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the BGVP Melody measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 3 measurements from the squig.link databases of animagus, pw and superreview. Thanks to each of them for publishing their work.
Head-to-Head Comparisons
4 comparisons- BGVP Melody vs Kiwi Ears Melody
- BGVP Melody vs Tanchjim Ola II
- BGVP Melody vs Rose Technics Photon Pro
- BGVP Melody vs KZ ZST X
No comparisons match that search.