Apos Rock Lobster Review: Ranked #990 of 1369

Last updated: October 17, 2026

The Apos Rock Lobster ranks #990 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#990 Apos Rock Lobster: 9.99 Apos eBay

Pros: A published AutoEQ preset corrects its response toward the Harman target, so a few minutes of EQ setup closes most of the gap.

Cons: Treble about 3 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.4 dB standard deviation from target.

Is the Apos Rock Lobster right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 2.7 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 24 points.

Skip it if

  • you want the best value: the higher-rated KZ ZST X costs about $3 less.
BackClosed
ConnectionWired
Deviation From Target2.43 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm liquid crystal polymer (LCP) dynamic driver
Form FactorIn-ear
Frequency Response20Hz - 20kHz
Harman Preference Score64 (median of 6 squig.link measurements, calibrated to AutoEQ)
Impedance32 ohms
Sensitivity105 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.9 dB at 30 Hz)
Tonal Tilt-1.01 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 64.

FilterFrequencyGainQ
Low shelf105 Hz-1.7 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak179 Hz-3.6 dB0.76
Peak2,306 Hz+1.6 dB3.33
Peak5,370 Hz+5.3 dB2.06

Neutral target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 89 out of 100, up from 26.

FilterFrequencyGainQ
Low shelf105 Hz-10.3 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak174 Hz-3.4 dB0.65
Peak713 Hz+0.9 dB3.06
Peak2,302 Hz+1.6 dB3.24
Peak5,369 Hz+5.3 dB2.06

Studio flat target

Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 85 out of 100, up from 6.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak170 Hz-5.4 dB0.69
Peak1,346 Hz-1.5 dB2.78
Peak2,773 Hz+3.3 dB0.77
Peak3,721 Hz-1.6 dB6.00
Peak5,708 Hz+2.9 dB4.46

Warm target

Set a preamp of -3.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz-1.5 dB0.70
High shelf10,000 Hz-3.8 dB0.70
Peak175 Hz-3.3 dB0.80
Peak5,583 Hz+3.8 dB3.49

Bass target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz+2.1 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak35 Hz+0.8 dB1.69
Peak186 Hz-3.6 dB0.80
Peak731 Hz+0.8 dB3.78
Peak2,307 Hz+1.6 dB3.33
Peak5,370 Hz+5.3 dB2.07

Bright target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 81 out of 100, up from 14.

FilterFrequencyGainQ
Low shelf105 Hz-10.3 dB0.70
High shelf10,000 Hz+1.9 dB0.70
Peak174 Hz-3.5 dB0.63
Peak4,947 Hz+6.0 dB1.50

V-shaped target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 78 out of 100, up from 60.

FilterFrequencyGainQ
Low shelf105 Hz+2.7 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak186 Hz-2.2 dB0.83
Peak4,774 Hz+5.9 dB1.26

Frequency Response

How the Apos Rock Lobster measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 7 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Apos Rock LobsterHarman target
Measured frequency response of the Apos Rock Lobster-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 7 measurements from the squig.link databases of aden, audioamigo, awsmdanny, boizoff, jaytiss, lestat and tonedeafmonk. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

5 comparisons