AME Raven Review: Ranked #1015 of 1369

Last updated: October 17, 2026

The AME Raven ranks #1015 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: AME

Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#1015 AME Raven: $3,240.00 MusicTeck $3,240.00 eBay

Pros: A published AutoEQ preset corrects its response toward the Harman target, so a few minutes of EQ setup closes most of the gap.

Cons: An uneven response, 2.6 dB standard deviation from target.

Is the AME Raven right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 23 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $3,216 less.
BackClosed
ConnectionWired
Deviation From Target2.62 dB standard deviation
Driver TypeHybrid
Drivers4 EST + 8 BA (4 x Sonion electrostatic drivers, 8 x Sonion balanced armatures)
Form FactorIn-ear
Frequency Response20Hz - 70kHz
Harman Preference Score63 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance14 ohms
Sensitivity100 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+1.1 dB at 30 Hz)
Tonal Tilt-0.57 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 86 out of 100, up from 63.

FilterFrequencyGainQ
Low shelf105 Hz-1.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak152 Hz-5.1 dB0.84
Peak702 Hz+2.5 dB2.11
Peak1,752 Hz-3.1 dB3.72
Peak5,893 Hz+6.0 dB3.85

Neutral target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 29.

FilterFrequencyGainQ
Low shelf105 Hz-10.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak143 Hz-5.0 dB0.76
Peak700 Hz+2.6 dB2.08
Peak1,752 Hz-3.1 dB3.74
Peak5,893 Hz+6.0 dB3.85

Studio flat target

Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 91 out of 100, up from 12.

FilterFrequencyGainQ
Low shelf105 Hz-11.9 dB0.70
High shelf10,000 Hz-1.9 dB0.70
Peak156 Hz-7.0 dB0.81
Peak285 Hz-1.1 dB3.10
Peak700 Hz+2.5 dB2.70
Peak1,658 Hz-2.5 dB3.50
Peak2,473 Hz+1.4 dB6.00
Peak2,854 Hz+4.3 dB4.72
Peak4,338 Hz-2.4 dB5.73
Peak6,148 Hz+3.5 dB2.54

Warm target

Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 86 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz-1.2 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+1.9 dB1.75
Peak150 Hz-4.9 dB0.87
Peak263 Hz-1.1 dB3.11
Peak707 Hz+2.8 dB2.02
Peak1,826 Hz-3.6 dB2.83
Peak4,157 Hz-2.8 dB5.31
Peak6,098 Hz+4.2 dB6.00

Bass target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 87 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+2.3 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak156 Hz-5.1 dB0.88
Peak703 Hz+2.5 dB2.13
Peak1,751 Hz-3.1 dB3.71
Peak5,894 Hz+6.0 dB3.86

Bright target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 85 out of 100, up from 19.

FilterFrequencyGainQ
Low shelf105 Hz-10.0 dB0.70
High shelf10,000 Hz-4.7 dB0.70
Peak143 Hz-5.1 dB0.75
Peak699 Hz+2.5 dB2.10
Peak1,737 Hz-3.1 dB3.92
Peak2,994 Hz+2.4 dB5.22
Peak5,563 Hz+6.0 dB2.09

V-shaped target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 82 out of 100, up from 64.

FilterFrequencyGainQ
Low shelf105 Hz+3.0 dB0.70
High shelf10,000 Hz-3.1 dB0.70
Peak23 Hz+2.0 dB1.67
Peak143 Hz-3.8 dB0.93
Peak650 Hz+2.3 dB2.13
Peak1,308 Hz-1.1 dB4.23
Peak1,673 Hz-2.9 dB3.77
Peak2,949 Hz+2.8 dB4.71
Peak5,425 Hz+6.0 dB1.82

Frequency Response

How the AME Raven measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

AME RavenHarman target
Measured frequency response of the AME Raven-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of aden, dchpgall and eliseaudio. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

4 comparisons

More AME headphones →