Yamaha DZR15 vs RCF ART 935-A

Last updated: September 7, 2026

Short answer: choose between the Yamaha DZR15 and RCF ART 935-A for the requirements of the venue and system, not from rank alone. In this size class, coverage, bass extension, output capability, DSP, cabinet construction, and service support often decide the better fit.

Why choose the Yamaha DZR15. Medium-quality vendor data returns a 4.54 ideal-subwoofer preference score with 39Hz measured extension, deeper than the DZR12. The bi-amped 2-inch compression driver and sophisticated onboard DSP target serious main-speaker duty.

Why choose the RCF ART 935-A. The bigger-voice-coil compression driver, 133dB claimed peak and broad 100° x 60° coverage mirror the well-regarded ART 932-A’s design in a 15-inch cabinet. At 24.2kg it stays manageable for a box this size.

What to weigh before buying. The bass-extension figure comes from truncated manufacturer data and should be read cautiously. The low-quality vendor measurement is truncated and cannot generate a preference score, so its tonal position relies on published engineering and its 12-inch sibling’s reputation rather than a confirmed result.

Buy the Yamaha DZR15 when its stated coverage, output, processing, and deployment format best match the job.

Buy the RCF ART 935-A when its stated strengths are the better match for the room and the rest of the PA.

Yamaha DZR15 vs RCF ART 935-A

Specifications Side By Side

Yamaha DZR15 RCF ART 935-A
Price$1,291.99$1,499.00
Ranked#7 of 29 in 15-Inch Two-Way Powered PA Speakers#10 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bi-amped bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15" woofer, 2" compression driver15" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response34Hz - 20kHz (-10dB, manufacturer specified)45Hz - 20kHz (manufacturer specified)
Dimensions30"H x 17.7"W x 18.1"D (761 x 450 x 460 mm)28.2"H x 16.3"W x 16.1"D (717 x 415 x 410 mm)
Coverage90° x 50°, rotatable100° x 60°
Maximum SPL139dB peak (manufacturer specified)133dB peak (manufacturer specified)
Inputs2 x XLR/TRS combo; 2 x XLR outputXLR and 1/4-inch jack input; XLR output
Amplifier Power2000W dynamic / 1100W burst / 950W continuous2100W peak (1400W LF + 700W HF)
Crossover Frequency1700Hz (FIR-X)800Hz
Cabinet MaterialPlywood with polyurea coatingPP composite
Rigging12 x M10 points; dual 35mm pole mountsM10 inserts; 35mm pole mount
Bass Extension (-3dB)46.2Hz (measured, vendor Spinorama data)54.5Hz (measured, vendor Spinorama data)
DSPYes, FIR-X tuning and Drive Motion CalibrationYes, FiRPHASE and Bass Motion Control
BluetoothNoNo
Weight55.6 lbs / 25.2 kg54.2 lbs / 24.6 kg

More useful head-to-heads from the same speaker class:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Yamaha DZR15: $1,291.99 Amazon B&H Photo Video Guitar Center eBay

Yamaha DZR15 ranking card

Pros: Medium-quality vendor data returns a 4.54 ideal-subwoofer preference score with 39Hz measured extension, deeper than the DZR12. The bi-amped 2-inch compression driver and sophisticated onboard DSP target serious main-speaker duty.

Cons: The bass-extension figure comes from truncated manufacturer data and should be read cautiously. It lacks Bluetooth audio and app control, and at this price competes with systems-grade alternatives from RCF and HK Audio.

Amplifier Power2000W dynamic / 1100W burst / 950W continuous
Bass Extension (-3dB)46.2Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPlywood with polyurea coating
ConfigurationActive 2-way bi-amped bass-reflex PA speaker
Coverage90° x 50°, rotatable
Crossover Frequency1700Hz (FIR-X)
DSPYes, FIR-X tuning and Drive Motion Calibration
Dimensions30"H x 17.7"W x 18.1"D (761 x 450 x 460 mm)
Drivers15" woofer, 2" compression driver
Frequency Response34Hz - 20kHz (-10dB, manufacturer specified)
Inputs2 x XLR/TRS combo; 2 x XLR output
Maximum SPL139dB peak (manufacturer specified)
Rigging12 x M10 points; dual 35mm pole mounts
Weight55.6 lbs / 25.2 kg

RCF ART 935-A: $1,499.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 935-A ranking card

Pros: The bigger-voice-coil compression driver, 133dB claimed peak and broad 100° x 60° coverage mirror the well-regarded ART 932-A’s design in a 15-inch cabinet. At 24.2kg it stays manageable for a box this size.

Cons: The low-quality vendor measurement is truncated and cannot generate a preference score, so its tonal position relies on published engineering and its 12-inch sibling’s reputation rather than a confirmed result.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)54.5Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPP composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 60°
Crossover Frequency800Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions28.2"H x 16.3"W x 16.1"D (717 x 415 x 410 mm)
Drivers15" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR and 1/4-inch jack input; XLR output
Maximum SPL133dB peak (manufacturer specified)
RiggingM10 inserts; 35mm pole mount
Weight54.2 lbs / 24.6 kg