Yamaha DXR15mkIII vs RCF ART 745-A MK5

Last updated: September 7, 2026

Short answer: choose between the Yamaha DXR15mkIII and RCF ART 745-A MK5 by matching the speaker to the deployment rather than treating their ranking positions as a universal verdict. Coverage, cabinet format, bass extension, output capability, DSP, and service support all matter in a PA system.

Why choose the Yamaha DXR15mkIII. The third-generation DXR15 raises claimed output to 134dB with 2000W amplification, app-based control and Yamaha’s newest onboard DSP, while its 90° x 60° pattern matches the well-regarded DXR12mkIII.

Why choose the RCF ART 745-A MK5. The top of the ART7 range pairs 133dB claimed peak output with a light 18.8kg enclosure, RCF’s largest ART7-tier compression driver and FiRPHASE processing carried over from the smaller 712/732-A MK5 models.

What to weigh before buying. The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR15mkII is unconfirmed. Wireless connectivity is for remote control, not audio streaming. The low-quality vendor measurement is truncated and cannot generate a preference score, so its tonal position relies on published engineering rather than a confirmed result.

Buy the Yamaha DXR15mkIII when its stated coverage, output, processing, and installation format fit the job better.

Buy the RCF ART 745-A MK5 when its stated strengths better suit the venue and the rest of the system.

Yamaha DXR15mkIII vs RCF ART 745-A MK5

Specifications Side By Side

Yamaha DXR15mkIII RCF ART 745-A MK5
Price$1,099.99$1,299.00
Ranked#12 of 29 in 15-Inch Two-Way Powered PA Speakers#18 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15" woofer, 1" throat/1.75" diaphragm compression driver15" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response46Hz - 20kHz (-10dB, manufacturer specified)45Hz - 20kHz (manufacturer specified)
Dimensions27.5"H x 17.6"W x 15"D (699 x 447 x 380 mm)27.9"H x 17.2"W x 15.3"D (708 x 437 x 389 mm)
Coverage90° x 60°90° x 60°
Maximum SPL134dB peak (manufacturer specified)133dB peak (manufacturer specified)
Inputs2 x XLR/TRS combo; XLR thru and DSP outputsXLR and 1/4-inch jack input; XLR output
Amplifier Power2000W peak / 1000W RMS (1700W LF + 300W HF peak)1400W peak (1000W LF + 400W HF)
Crossover Frequency1800Hz (FIR-X)650Hz
Cabinet MaterialPP plasticPP composite
Rigging3 x M10 points plus U-bracket points; 35mm dual-angle pole mount2 x M10 inserts; 35mm pole mount
Bass Extension (-3dB)54.5Hz (measured, vendor Spinorama data)65Hz (measured, vendor Spinorama data)
DSPYes, FIR-X tuning, Drive Motion Calibration and D-RemoteYes, FiRPHASE, EQ, limiting and protection
BluetoothBluetooth 5.0 audio streaming and D-Remote controlNo
Weight46.3 lbs / 21 kg41.4 lbs / 18.8 kg

A few more comparisons worth a look in the same class:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Yamaha DXR15mkIII: $1,099.99 Amazon B&H Photo Video Guitar Center eBay

Yamaha DXR15mkIII ranking card

Pros: The third-generation DXR15 raises claimed output to 134dB with 2000W amplification, app-based control and Yamaha’s newest onboard DSP, while its 90° x 60° pattern matches the well-regarded DXR12mkIII.

Cons: The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR15mkII is unconfirmed. Wireless connectivity is for remote control, not audio streaming.

Amplifier Power2000W peak / 1000W RMS (1700W LF + 300W HF peak)
Bass Extension (-3dB)54.5Hz (measured, vendor Spinorama data)
BluetoothBluetooth 5.0 audio streaming and D-Remote control
Cabinet MaterialPP plastic
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
Crossover Frequency1800Hz (FIR-X)
DSPYes, FIR-X tuning, Drive Motion Calibration and D-Remote
Dimensions27.5"H x 17.6"W x 15"D (699 x 447 x 380 mm)
Drivers15" woofer, 1" throat/1.75" diaphragm compression driver
Frequency Response46Hz - 20kHz (-10dB, manufacturer specified)
Inputs2 x XLR/TRS combo; XLR thru and DSP outputs
Maximum SPL134dB peak (manufacturer specified)
Rigging3 x M10 points plus U-bracket points; 35mm dual-angle pole mount
Weight46.3 lbs / 21 kg

RCF ART 745-A MK5: $1,299.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 745-A MK5 ranking card

Pros: The top of the ART7 range pairs 133dB claimed peak output with a light 18.8kg enclosure, RCF’s largest ART7-tier compression driver and FiRPHASE processing carried over from the smaller 712/732-A MK5 models.

Cons: The low-quality vendor measurement is truncated and cannot generate a preference score, so its tonal position relies on published engineering rather than a confirmed result.

Amplifier Power1400W peak (1000W LF + 400W HF)
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPP composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
Crossover Frequency650Hz
DSPYes, FiRPHASE, EQ, limiting and protection
Dimensions27.9"H x 17.2"W x 15.3"D (708 x 437 x 389 mm)
Drivers15" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR and 1/4-inch jack input; XLR output
Maximum SPL133dB peak (manufacturer specified)
Rigging2 x M10 inserts; 35mm pole mount
Weight41.4 lbs / 18.8 kg