Yamaha DXR15mkIII vs RCF ART 745-A MK4

Last updated: September 7, 2026

Short answer: choose between the Yamaha DXR15mkIII and RCF ART 745-A MK4 for the requirements of the venue and system, not from rank alone. In this size class, coverage, bass extension, output capability, DSP, cabinet construction, and service support often decide the better fit.

Why choose the Yamaha DXR15mkIII. The third-generation DXR15 raises claimed output to 134dB with 2000W amplification, app-based control and Yamaha’s newest onboard DSP, while its 90° x 60° pattern matches the well-regarded DXR12mkIII.

Why choose the RCF ART 745-A MK4. The largest ART7 compression driver, 133dB claimed peak and a light 18.8kg enclosure give this discontinued flagship useful vocal headroom for a 15-inch box.

What to weigh before buying. The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR15mkII is unconfirmed. Wireless connectivity is for remote control, not audio streaming. The low-quality vendor data is truncated and does not yield a preference score. It is discontinued and is eclipsed by the better-supported ART 745-A MK5.

Buy the Yamaha DXR15mkIII when its stated coverage, output, processing, and deployment format best match the job.

Buy the RCF ART 745-A MK4 when its stated strengths are the better match for the room and the rest of the PA.

Yamaha DXR15mkIII vs RCF ART 745-A MK4

Specifications Side By Side

Yamaha DXR15mkIII RCF ART 745-A MK4
Price$1,099.99$1,699.00
Ranked#12 of 29 in 15-Inch Two-Way Powered PA Speakers#21 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15" woofer, 1" throat/1.75" diaphragm compression driver15" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response46Hz - 20kHz (-10dB, manufacturer specified)45Hz - 20kHz (manufacturer specified)
Dimensions27.5"H x 17.6"W x 15"D (699 x 447 x 380 mm)27.9"H x 17.4"W x 15.2"D (708 x 442 x 387 mm)
Coverage90° x 60°100° x 60°
Maximum SPL134dB peak (manufacturer specified)133dB peak (manufacturer specified)
Inputs2 x XLR/TRS combo; XLR thru and DSP outputsXLR/jack combo input; XLR output
Amplifier Power2000W peak / 1000W RMS (1700W LF + 300W HF peak)1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified)
Crossover Frequency1800Hz (FIR-X)650Hz (manufacturer specified)
Cabinet MaterialPP plasticPolypropylene composite
Rigging3 x M10 points plus U-bracket points; 35mm dual-angle pole mountM10 fly points; pole mount
Bass Extension (-3dB)54.5Hz (measured, vendor Spinorama data)65Hz (measured, vendor Spinorama data)
DSPYes, FIR-X tuning, Drive Motion Calibration and D-RemoteYes, FiRPHASE, EQ, limiting and protection
BluetoothBluetooth 5.0 audio streaming and D-Remote controlNo
Weight46.3 lbs / 21 kg41.4 lbs / 18.8 kg

Other pairings from the same speaker class worth checking:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Yamaha DXR15mkIII: $1,099.99 Amazon B&H Photo Video Guitar Center eBay

Yamaha DXR15mkIII ranking card

Pros: The third-generation DXR15 raises claimed output to 134dB with 2000W amplification, app-based control and Yamaha’s newest onboard DSP, while its 90° x 60° pattern matches the well-regarded DXR12mkIII.

Cons: The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR15mkII is unconfirmed. Wireless connectivity is for remote control, not audio streaming.

Amplifier Power2000W peak / 1000W RMS (1700W LF + 300W HF peak)
Bass Extension (-3dB)54.5Hz (measured, vendor Spinorama data)
BluetoothBluetooth 5.0 audio streaming and D-Remote control
Cabinet MaterialPP plastic
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
Crossover Frequency1800Hz (FIR-X)
DSPYes, FIR-X tuning, Drive Motion Calibration and D-Remote
Dimensions27.5"H x 17.6"W x 15"D (699 x 447 x 380 mm)
Drivers15" woofer, 1" throat/1.75" diaphragm compression driver
Frequency Response46Hz - 20kHz (-10dB, manufacturer specified)
Inputs2 x XLR/TRS combo; XLR thru and DSP outputs
Maximum SPL134dB peak (manufacturer specified)
Rigging3 x M10 points plus U-bracket points; 35mm dual-angle pole mount
Weight46.3 lbs / 21 kg

RCF ART 745-A MK4: $1,699.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 745-A MK4 ranking card

Pros: The largest ART7 compression driver, 133dB claimed peak and a light 18.8kg enclosure give this discontinued flagship useful vocal headroom for a 15-inch box.

Cons: The low-quality vendor data is truncated and does not yield a preference score. It is discontinued and is eclipsed by the better-supported ART 745-A MK5.

Amplifier Power1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified)
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPolypropylene composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 60°
Crossover Frequency650Hz (manufacturer specified)
DSPYes, FiRPHASE, EQ, limiting and protection
Dimensions27.9"H x 17.4"W x 15.2"D (708 x 442 x 387 mm)
Drivers15" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/jack combo input; XLR output
Maximum SPL133dB peak (manufacturer specified)
RiggingM10 fly points; pole mount
Weight41.4 lbs / 18.8 kg