Short answer: choose between the Wharfedale Pro Delta X10 and L-Acoustics 112P for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the Wharfedale Pro Delta X10. Built from 15mm birch plywood with a titanium-diaphragm compression driver, it can run full-range passive or switch to bi-amp mode for more control when paired with separate amplifiers, and its 300W continuous/1,200W peak handling is a genuine budget entry point for a 10-inch box.
The case for the L-Acoustics 112P. Its medium-quality vendor Spinorama data produces the category’s highest ideal-subwoofer preference score at 7.22, with 54Hz bass extension. The coaxial layout gives symmetric 90° coverage and strong feedback resistance for monitor and near-field work.
Important trade-offs. Low-quality independent data shows a 1.11 ideal-subwoofer preference score with bass extension only to roughly 100Hz, the weakest measured result in this entire ranking; a subwoofer partner is effectively mandatory. This discontinued 32kg cabinet is difficult to source, very heavy for a portable 12-inch box and lacks modern networking or an onboard mixer. Its ranking reflects acoustic performance rather than present-day value or ownership convenience.
Buy the Wharfedale Pro Delta X10 when its stated format, coverage, and system features fit the job better.
Buy the L-Acoustics 112P when its stated output, control, and deployment strengths better match the system.
If sound quality matters at all to you, skip the Wharfedale Pro Delta X10. It ranks near the bottom of the 19 10-inch two-way powered pa speakers, so look higher up the list instead.
Specifications Side By Side
| Wharfedale Pro Delta X10 | L-Acoustics 112P | |
|---|---|---|
| Price | $640.00 | - |
| Ranked | #19 of 19 in 10-Inch Two-Way Powered PA Speakers | #2 of 37 in 12-Inch Two-Way Powered PA Speakers |
| Configuration | Passive 2-way (bi-amp capable) bass-reflex PA speaker | Self-powered 2-way coaxial PA speaker |
| Drivers | 10" woofer, titanium-diaphragm compression driver | 12" coaxial woofer, 1.4" exit/3" voice-coil compression driver |
| Frequency Response | 65Hz - 20kHz (±3dB, manufacturer specified); 60Hz - 20kHz (-10dB) | 50Hz - 20kHz (-10dB, FRONT preset, manufacturer specified) |
| Dimensions | 19.7"H x 13.3"W x 13"D (500 x 338 x 330 mm) | 21.3"H x 16.1"W x 15.4"D (540 x 410 x 390 mm) |
| Inputs | Two NL4 speakON-compatible connectors | Balanced XLR analog input |
| Power Handling | 300W continuous / 600W program / 1,200W peak (manufacturer specified) | - |
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 300W continuous / 600W program / 1,200W peak handling rating | 1,000W at 8Ω (manufacturer specified) |
| Crossover Frequency | 2.8kHz (manufacturer specified) | - |
| Cabinet Material | 15mm plywood with Rhino Rock finish | 18/24/30mm Baltic birch plywood |
| Rigging | Dual-angle 35mm (0°/10°) pole mount | Integrated pole-mount socket; optional ETRI2-2 bracket and XTLIFTBAR |
| Maximum SPL | 128dB peak (manufacturer specified) | 133dB peak (manufacturer specified) |
| Bass Extension (-3dB) | 100Hz (measured, independent data) | 60Hz (measured, vendor Spinorama data) |
| Bluetooth | No | No |
| Coverage | - | 90° conical |
| DSP | - | Yes, onboard presets and protection |
| Weight | - | 70.5 lbs / 32 kg |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- PreSonus ULT10 vs QSC K12.2
- RCF HD 10-A MK5 vs PreSonus ULT10
- QSC K12.2 vs FBT ProMaxX 112A
- Martin Audio CDD10 vs Wharfedale Pro Delta X10
- L-Acoustics 112P vs FBT ProMaxX 112A
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Wharfedale Pro Delta X10: $640.00 eBay
Pros: Built from 15mm birch plywood with a titanium-diaphragm compression driver, it can run full-range passive or switch to bi-amp mode for more control when paired with separate amplifiers, and its 300W continuous/1,200W peak handling is a genuine budget entry point for a 10-inch box.
Cons: Low-quality independent data shows a 1.11 ideal-subwoofer preference score with bass extension only to roughly 100Hz, the weakest measured result in this entire ranking; a subwoofer partner is effectively mandatory.
Full Wharfedale Pro Delta X10 review and specifications →
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 300W continuous / 600W program / 1,200W peak handling rating |
|---|---|
| Bass Extension (-3dB) | 100Hz (measured, independent data) |
| Bluetooth | No |
| Cabinet Material | 15mm plywood with Rhino Rock finish |
| Configuration | Passive 2-way (bi-amp capable) bass-reflex PA speaker |
| Crossover Frequency | 2.8kHz (manufacturer specified) |
| Dimensions | 19.7"H x 13.3"W x 13"D (500 x 338 x 330 mm) |
| Drivers | 10" woofer, titanium-diaphragm compression driver |
| Frequency Response | 65Hz - 20kHz (±3dB, manufacturer specified); 60Hz - 20kHz (-10dB) |
| Inputs | Two NL4 speakON-compatible connectors |
| Maximum SPL | 128dB peak (manufacturer specified) |
| Power Handling | 300W continuous / 600W program / 1,200W peak (manufacturer specified) |
| Rigging | Dual-angle 35mm (0°/10°) pole mount |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
L-Acoustics 112P eBay
Pros: Its medium-quality vendor Spinorama data produces the category’s highest ideal-subwoofer preference score at 7.22, with 54Hz bass extension. The coaxial layout gives symmetric 90° coverage and strong feedback resistance for monitor and near-field work.
Cons: This discontinued 32kg cabinet is difficult to source, very heavy for a portable 12-inch box and lacks modern networking or an onboard mixer. Its ranking reflects acoustic performance rather than present-day value or ownership convenience.
Full L-Acoustics 112P review and specifications →
| Amplifier Power | 1,000W at 8Ω (manufacturer specified) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 18/24/30mm Baltic birch plywood |
| Configuration | Self-powered 2-way coaxial PA speaker |
| Coverage | 90° conical |
| DSP | Yes, onboard presets and protection |
| Dimensions | 21.3"H x 16.1"W x 15.4"D (540 x 410 x 390 mm) |
| Drivers | 12" coaxial woofer, 1.4" exit/3" voice-coil compression driver |
| Frequency Response | 50Hz - 20kHz (-10dB, FRONT preset, manufacturer specified) |
| Inputs | Balanced XLR analog input |
| Maximum SPL | 133dB peak (manufacturer specified) |
| Rigging | Integrated pole-mount socket; optional ETRI2-2 bracket and XTLIFTBAR |
| Weight | 70.5 lbs / 32 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons