Wharfedale Aura 2 vs Wharfedale Super Linton

Last updated: September 29, 2026

Short answer: the Wharfedale Aura 2 if you want the flatter, more extended speaker, the Super Linton if placement flexibility and a matched pair with stands matter more. The Aura 2 ranks #13 of 131 bookshelf speakers at $2,799; the Super Linton ranks #24 at $2,699, $100 cheaper.

Wharfedale Aura 2 vs Wharfedale Super Linton

The Aura 2 measures close to reference-flat. Erin’s Audio Corner found it within about 1.5dB for most of the range, reaching a genuine 40Hz in most rooms and hitting roughly 100dB average at 10 feet with very low distortion. Its main flaw is a breakup/peak around 13kHz that can sound sharp or shrill depending on the track, and its vertical listening window is narrower than typical because of the AMT ribbon tweeter’s tall physical size.

The Super Linton fixes the original Linton’s main complaint but rolls off earlier. Its bass extension reaches 77Hz at -3dB, compared to the original Linton’s 52Hz, a deliberate tradeoff that lets it sit closer to a rear wall (about a foot worked well in testing) without excess boominess. In exchange, it fills in the original’s 1-3kHz scoop, giving noticeably more attack and dynamic punch, and measures about 3dB more sensitive at 88.2dB, meaning roughly half the amplifier power for the same output.

What the Super Linton adds over the Aura 2: custom matching stands included in the price, and a genuinely matched pair measured within about 1dB of each other.

Buy the Wharfedale Aura 2 if deep bass extension and the flattest possible on-axis response matter most, and you can live with its narrower vertical sweet spot.

Buy the Wharfedale Super Linton if you need to place speakers close to a wall, want the included stands, or prefer the more forgiving, punchier tonal balance.

Still deciding? The full Passive Home rankings cover every ranked option.

Specifications Side By Side

Wharfedale Aura 2 Wharfedale Super Linton
Price$2799 per pair$2,699.00 per pair
Ranked#13 of 131 in Large Size Bookshelf Speakers#24 of 131 in Large Size Bookshelf Speakers
Bass Extension (-10dB)30Hz (measured, Erin’s Audio Corner)34Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)56Hz (measured, Erin’s Audio Corner)77Hz (measured, Erin’s Audio Corner)
Dimensions22.1”H x 11.3”W x 15.3”D (561.3 x 287 x 388.6 mm)23.8”H x 11.8”W x 13”D (604.5 x 299.7 x 330.2 mm)
Impedance6 ohms nominal (3.1 ohms minimum above 80Hz, measured, Erin’s Audio Corner)4 ohms nominal (3 ohms minimum, measured, Erin’s Audio Corner)
Drivers6.5” Black Glass Fibre Matrix Cone woofer, 4” Black Glass Fibre Matrix Cone midrange, 27x90mm AMT tweeter8”(200mm) black woven Kevlar® cone woofer, 5”(135mm) black woven Kevlar® cone midrange, 1” (25mm) soft dome tweeter
Sensitivity87dB (measured, Erin’s Audio Corner)88.2dB (measured, Erin’s Audio Corner)
Weight45 lbs (20.4 kg) each43.7 lbs (19.8 kg) each
Woofer Cabinetported, rearported, rear
Spinorama Preference Score6.036.09
Spinorama Preference Score with Perfect Sub7.657.94
DIY KitNoNo

How Wharfedale Aura 2 compares with other leading options:

Prices on this page were last checked September 29, 2026 at 3:43 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Wharfedale Aura 2: $2799 per pair Crutchfield eBay

Wharfedale Aura 2 ranking card

Pros: Three-way “mini tower” design with a 27x90mm AMT tweeter, 4” mid-range, and 6.5” midwoofer, using an unusual bottom-firing port. Nearly “ruler flat” on-axis linearity (within about 1.5dB for most of the range) apart from one specific breakup point. Exceptional output capability with very low distortion even at high volume: the reviewer reached about 100dB average at 10 feet with no audible strain, outperforming rivals like the KEF LS50 Meta in multitone distortion above 1kHz. Wide horizontal radiation of about ±70° combined with excellent imaging and pair matching: passed demanding stereo-separation test tracks with precise instrument placement. Bass reaches a genuine 40Hz in most rooms, potentially eliminating the need for a subwoofer for material that doesn’t demand extreme sub-bass. About 20dB of usable dynamic range with no compression issues at 96dB/1m. Considered by the reviewer one of the best speakers he’s tested, potentially challenging his personal all-time top five. Measured bass extension of 56Hz (-3dB), with a measured sensitivity of 87dB.

Cons: A breakup/peak around 13kHz can sound sharp or shrill depending on the track, the main tonal flaw noted. Minor midbase-to-midrange balance discrepancy (about 1dB), most noticeable if the speaker sits more than about 2 feet from the rear wall. Vertical listening window is narrower than typical, a consequence of the AMT ribbon tweeter’s tall physical size: staying within about ±15-20° of the tweeter reference axis (or slightly below it) is important. Impedance dips to about 3.1 ohms with a 1.4-ohm minimum EPDR, meaning a dedicated amplifier is recommended over an AVR due to potential power-supply strain. Distortion rises at the very lowest frequencies (an expected limitation of a 6.5” woofer), and the woofer audibly struggles with extreme 30-35Hz content at high volume. Horizontal directivity narrows from about ±70° to ±50° above roughly 6-7kHz as the ribbon tweeter’s pattern collapses inward.

Bass Extension (-10dB)30Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)56Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions22.1”H x 11.3”W x 15.3”D (561.3 x 287 x 388.6 mm)
Drivers6.5” Black Glass Fibre Matrix Cone woofer, 4” Black Glass Fibre Matrix Cone midrange, 27x90mm AMT tweeter
Impedance6 ohms nominal (3.1 ohms minimum above 80Hz, measured, Erin’s Audio Corner)
Sensitivity87dB (measured, Erin’s Audio Corner)
Spinorama Preference Score6.03
Spinorama Preference Score with Perfect Sub7.65
Weight45 lbs (20.4 kg) each
Woofer Cabinetported, rear

Wharfedale Super Linton: $2,699.00 per pair Amazon Crutchfield eBay

Wharfedale Super Linton ranking card

Pros: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton: kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Measured bass extension of 77Hz (-3dB), with a measured sensitivity of 88.2dB.

Cons: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.

Bass Extension (-10dB)34Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)77Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions23.8”H x 11.8”W x 13”D (604.5 x 299.7 x 330.2 mm)
Drivers8”(200mm) black woven Kevlar® cone woofer, 5”(135mm) black woven Kevlar® cone midrange, 1” (25mm) soft dome tweeter
Impedance4 ohms nominal (3 ohms minimum, measured, Erin’s Audio Corner)
Sensitivity88.2dB (measured, Erin’s Audio Corner)
Spinorama Preference Score6.09
Spinorama Preference Score with Perfect Sub7.94
Weight43.7 lbs (19.8 kg) each
Woofer Cabinetported, rear