Short answer: the AsciLab C6B. It ranks #7 of 130 bookshelf speakers by sound quality at $1145; the Wharfedale Aura 2 ranks #13 and costs $2799, so there is little reason to consider the other one.
What the AsciLab C6B offers: Two-way design pairing a 1” aluminum ceramic dome tweeter on a large waveguide with a 6” aluminum ceramic cone woofer, crossed over at 1.1kHz, plus a rear passive radiator. Unusual trait: horizontal radiation actually widens at higher frequencies instead of narrowing like most two-way designs, which keeps image focus and soundstage depth consistent whether you toe the speakers in or out (5-10° off-axis was the sweet spot in testing). Vertical radiation also stays wide straight through the 2kHz crossover region, so the sound doesn’t collapse when standing up - unusual at this price. CA2034 measurements show strong on-axis linearity, listening window, early reflections, and directivity. Midrange and tweeter distortion stay very low even at 96dB, holding up against a $5,900 Arendal speaker in that regard despite roughly a 5x price gap. At $935 (about $1,135 shipped to the US), the reviewer calls it the best-value bookshelf speaker he’s tested, rivaling speakers 2-5x the price. Watch for: Bass rolls off around 50Hz in-room (F3 54Hz, F10 35Hz), so a subwoofer is needed for real extension below that. Low-frequency harmonic distortion increases substantially at 96dB versus 86dB, though it’s second-order and less audible than it looks on paper. Minimum impedance dips to 2.6 ohms (EPDR as low as 1.2 ohms), so it wants an amplifier comfortable driving 4-ohm loads, ideally 100W or more. At 102dB, compression noticeably eats into midrange, bass, and some treble output. Shipping to the US adds roughly $200 on top of the $935 price. Against the reviewer’s reference Audiofirst Fidelia at a similar price, has slightly less lower-midrange body (about 1dB difference) and a smaller perceived soundstage size.
What the Wharfedale Aura 2 offers: Three-way “mini tower” design with a 27x90mm AMT tweeter, 4” mid-range, and 6.5” midwoofer, using an unusual bottom-firing port. Nearly “ruler flat” on-axis linearity (within about 1.5dB for most of the range) apart from one specific breakup point. Exceptional output capability with very low distortion even at high volume - the reviewer reached about 100dB average at 10 feet with no audible strain, outperforming rivals like the KEF LS50 Meta in multitone distortion above 1kHz. Wide horizontal radiation of about ±70° combined with excellent imaging and pair matching - passed demanding stereo-separation test tracks with precise instrument placement. Bass reaches a genuine 40Hz in most rooms, potentially eliminating the need for a subwoofer for material that doesn’t demand extreme sub-bass. About 20dB of usable dynamic range with no compression issues at 96dB/1m. Considered by the reviewer one of the best speakers he’s tested, potentially challenging his personal all-time top five. Watch for: A breakup/peak around 13kHz can sound sharp or shrill depending on the track, the main tonal flaw noted. Minor midbase-to-midrange balance discrepancy (about 1dB), most noticeable if the speaker sits more than about 2 feet from the rear wall. Vertical listening window is narrower than typical, a consequence of the AMT ribbon tweeter’s tall physical size - staying within about ±15-20° of the tweeter reference axis (or slightly below it) is important. Impedance dips to about 3.1 ohms with a 1.4-ohm minimum EPDR, meaning a dedicated amplifier is recommended over an AVR due to potential power-supply strain. Distortion rises at the very lowest frequencies (an expected limitation of a 6.5” woofer), and the woofer audibly struggles with extreme 30-35Hz content at high volume. Horizontal directivity narrows from about ±70° to ±50° above roughly 6-7kHz as the ribbon tweeter’s pattern collapses inward.
Buy the AsciLab C6B. It ranks higher for sound quality than the Wharfedale Aura 2 and costs less, so there is no real case for the other one.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| AsciLab C6B | Wharfedale Aura 2 | |
|---|---|---|
| Price | $1145 per pair | $2799 per pair |
| Ranked | #7 of 130 in Large Size Bookshelf Speakers | #13 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 35Hz (measured, Erin's Audio Corner) | 30Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 54Hz (measured, Erin's Audio Corner) | 56Hz (measured, Erin's Audio Corner) |
| Dimensions | 15.7"H x 8"W x 10.4"D (398.8 x 203.2 x 264.2 mm) | 22.1"H x 11.3"W x 15.3"D (561.3 x 287 x 388.6 mm) |
| Impedance | 4 ohms nominal, 2.6 ohms minimum (measured, Erin's Audio Corner) | 6 ohms nominal (3.1 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 85.6dB (measured, Erin's Audio Corner) | 87dB (measured, Erin's Audio Corner) |
| Drivers | 6" Aluminium Ceramic Cone with cast Aluminium Chassis woofer, 1" Aluminium Ceramic Dome tweeter | 6.5" Black Glass Fibre Matrix Cone woofer, 4" Black Glass Fibre Matrix Cone midrange, 27x90mm AMT tweeter |
| Weight | 18.5 lbs (8.4 kg) each | 45 lbs (20.4 kg) each |
| Woofer Cabinet | passive radiator | ported, rear |
| Spinorama Preference Score | 5.66 | 5.19 |
| Spinorama Preference Score with Perfect Sub | 7.60 | 6.81 |
Related Speaker Comparisons
More top alternatives to AsciLab C6B:
- AsciLab C6B vs Perlisten S4b
- AsciLab C6B vs KEF Reference 1 Meta
- AsciLab C6B vs GR-Research NX-Studio
- AsciLab C6B vs March Audio Sointuva AWG
- AsciLab C6B vs Audio First Cadentia 3
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
AsciLab C6B: $1145 per pair Ascilab eBay
Pros: Two-way design pairing a 1” aluminum ceramic dome tweeter on a large waveguide with a 6” aluminum ceramic cone woofer, crossed over at 1.1kHz, plus a rear passive radiator. Unusual trait: horizontal radiation actually widens at higher frequencies instead of narrowing like most two-way designs, which keeps image focus and soundstage depth consistent whether you toe the speakers in or out (5-10° off-axis was the sweet spot in testing). Vertical radiation also stays wide straight through the 2kHz crossover region, so the sound doesn’t collapse when standing up - unusual at this price. CA2034 measurements show strong on-axis linearity, listening window, early reflections, and directivity. Midrange and tweeter distortion stay very low even at 96dB, holding up against a $5,900 Arendal speaker in that regard despite roughly a 5x price gap. At $935 (about $1,135 shipped to the US), the reviewer calls it the best-value bookshelf speaker he’s tested, rivaling speakers 2-5x the price. Measured bass extension of 54Hz (-3dB), with a measured sensitivity of 85.6dB.
Cons: Bass rolls off around 50Hz in-room (F3 54Hz, F10 35Hz), so a subwoofer is needed for real extension below that. Low-frequency harmonic distortion increases substantially at 96dB versus 86dB, though it’s second-order and less audible than it looks on paper. Minimum impedance dips to 2.6 ohms (EPDR as low as 1.2 ohms), so it wants an amplifier comfortable driving 4-ohm loads, ideally 100W or more. At 102dB, compression noticeably eats into midrange, bass, and some treble output. Shipping to the US adds roughly $200 on top of the $935 price. Against the reviewer’s reference Audiofirst Fidelia at a similar price, has slightly less lower-midrange body (about 1dB difference) and a smaller perceived soundstage size.
Full AsciLab C6B review and specifications →
| Bass Extension (-10dB) | 35Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 54Hz (measured, Erin's Audio Corner) |
| Dimensions | 15.7"H x 8"W x 10.4"D (398.8 x 203.2 x 264.2 mm) |
| Drivers | 6" Aluminium Ceramic Cone with cast Aluminium Chassis woofer, 1" Aluminium Ceramic Dome tweeter |
| Impedance | 4 ohms nominal, 2.6 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 85.6dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 5.66 |
| Spinorama Preference Score with Perfect Sub | 7.60 |
| Weight | 18.5 lbs (8.4 kg) each |
| Woofer Cabinet | passive radiator |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Wharfedale Aura 2: $2799 per pair Crutchfield eBay
Pros: Three-way “mini tower” design with a 27x90mm AMT tweeter, 4” mid-range, and 6.5” midwoofer, using an unusual bottom-firing port. Nearly “ruler flat” on-axis linearity (within about 1.5dB for most of the range) apart from one specific breakup point. Exceptional output capability with very low distortion even at high volume - the reviewer reached about 100dB average at 10 feet with no audible strain, outperforming rivals like the KEF LS50 Meta in multitone distortion above 1kHz. Wide horizontal radiation of about ±70° combined with excellent imaging and pair matching - passed demanding stereo-separation test tracks with precise instrument placement. Bass reaches a genuine 40Hz in most rooms, potentially eliminating the need for a subwoofer for material that doesn’t demand extreme sub-bass. About 20dB of usable dynamic range with no compression issues at 96dB/1m. Considered by the reviewer one of the best speakers he’s tested, potentially challenging his personal all-time top five. Measured bass extension of 56Hz (-3dB), with a measured sensitivity of 87dB.
Cons: A breakup/peak around 13kHz can sound sharp or shrill depending on the track, the main tonal flaw noted. Minor midbase-to-midrange balance discrepancy (about 1dB), most noticeable if the speaker sits more than about 2 feet from the rear wall. Vertical listening window is narrower than typical, a consequence of the AMT ribbon tweeter’s tall physical size - staying within about ±15-20° of the tweeter reference axis (or slightly below it) is important. Impedance dips to about 3.1 ohms with a 1.4-ohm minimum EPDR, meaning a dedicated amplifier is recommended over an AVR due to potential power-supply strain. Distortion rises at the very lowest frequencies (an expected limitation of a 6.5” woofer), and the woofer audibly struggles with extreme 30-35Hz content at high volume. Horizontal directivity narrows from about ±70° to ±50° above roughly 6-7kHz as the ribbon tweeter’s pattern collapses inward.
Full Wharfedale Aura 2 review and specifications →
| Bass Extension (-10dB) | 30Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 56Hz (measured, Erin's Audio Corner) |
| Dimensions | 22.1"H x 11.3"W x 15.3"D (561.3 x 287 x 388.6 mm) |
| Drivers | 6.5" Black Glass Fibre Matrix Cone woofer, 4" Black Glass Fibre Matrix Cone midrange, 27x90mm AMT tweeter |
| Impedance | 6 ohms nominal (3.1 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 87dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 5.19 |
| Spinorama Preference Score with Perfect Sub | 6.81 |
| Weight | 45 lbs (20.4 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Why the Wharfedale AURA 2 Will Blow Your Mind More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Wharfedale Aura 2
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Personal Favorite Speakers Under $2500
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- Wharfedale Aura 2 vs KEF Q Concerto Meta
- Wharfedale Aura 2 vs KEF R3
- Wharfedale Aura 2 vs KEF R3 Meta
- Wharfedale Aura 2 vs Buchardt Audio E50
- Wharfedale Aura 2 vs MoFi SourcePoint 8
- Wharfedale Aura 2 vs Revel M106
- Wharfedale Aura 2 vs Audio First Cadentia 3
- Wharfedale Aura 2 vs AsciLab F6Bs
- See all 46 comparisons