Short answer: the Wharfedale Aura 2. It ranks #13 of 130 bookshelf speakers by sound quality at $2799; the MoFi SourcePoint 10 ranks #26 and costs $3795, so there is little reason to consider the other one.
What the Wharfedale Aura 2 offers: Three-way “mini tower” design with a 27x90mm AMT tweeter, 4” mid-range, and 6.5” midwoofer, using an unusual bottom-firing port. Nearly “ruler flat” on-axis linearity (within about 1.5dB for most of the range) apart from one specific breakup point. Exceptional output capability with very low distortion even at high volume - the reviewer reached about 100dB average at 10 feet with no audible strain, outperforming rivals like the KEF LS50 Meta in multitone distortion above 1kHz. Wide horizontal radiation of about ±70° combined with excellent imaging and pair matching - passed demanding stereo-separation test tracks with precise instrument placement. Bass reaches a genuine 40Hz in most rooms, potentially eliminating the need for a subwoofer for material that doesn’t demand extreme sub-bass. About 20dB of usable dynamic range with no compression issues at 96dB/1m. Considered by the reviewer one of the best speakers he’s tested, potentially challenging his personal all-time top five. Watch for: A breakup/peak around 13kHz can sound sharp or shrill depending on the track, the main tonal flaw noted. Minor midbase-to-midrange balance discrepancy (about 1dB), most noticeable if the speaker sits more than about 2 feet from the rear wall. Vertical listening window is narrower than typical, a consequence of the AMT ribbon tweeter’s tall physical size - staying within about ±15-20° of the tweeter reference axis (or slightly below it) is important. Impedance dips to about 3.1 ohms with a 1.4-ohm minimum EPDR, meaning a dedicated amplifier is recommended over an AVR due to potential power-supply strain. Distortion rises at the very lowest frequencies (an expected limitation of a 6.5” woofer), and the woofer audibly struggles with extreme 30-35Hz content at high volume. Horizontal directivity narrows from about ±70° to ±50° above roughly 6-7kHz as the ribbon tweeter’s pattern collapses inward.
What the MoFi SourcePoint 10 offers: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s testing - a genuine “point source” design. Vertical and horizontal radiation patterns closely match each other (about ±50° horizontal, ±30-40° vertical), a hallmark benefit of a well-executed concentric driver. Distortion stays low - under 1% above 100Hz at 86dB, and under 3% up to 100Hz even at 96dB, better than the reviewer expected from a low-excursion waveguide-loaded woofer. Surprisingly strong dynamic capability with little audible compression at both low and high volume. Widely spaced (about 11 feet apart) with roughly 15° of toe-out produced a huge, expansive soundstage without significant loss of imaging precision. Solidly built cabinet (about 40 lbs, heavily braced) minimizes cabinet resonance. Watch for: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate for the 28mm tweeter’s earlier beaming versus a typical 25mm/1” tweeter) combined with a diffraction dip/peak from the waveguide edge; needs about 15° of toe-out to sound neutral, and even then benefits from an extra 1-2dB of treble EQ. Toeing out further (to 30°) flattens the treble further but introduces a dip in the midrange-to-tweeter crossover region - there’s no single toe-out angle that fixes everything at once. F3 of 56Hz and F10 of 38Hz (about 40Hz in-room) mean genuine deep bass is limited; the reviewer would pair it with a sealed 10” or 12” subwoofer for regular daily listening. Bass extension and cabinet placement trade off against midrange cleanliness: placing it close to a wall for more bass risks a wall-bounce suckout in the midrange (roughly 200-500Hz depending on distance). Not perfectly time-aligned between tweeter and woofer (about 0.4ms delta), an inherent limitation of passive coincident drivers versus actively time-corrected designs. Some resonances appear in measurements, likely port-related. Minimum impedance around 6.4 ohms with EPDR near 3 ohms, so the reviewer recommends sticking with a 4-ohm-rated amplifier to be safe.
Buy the Wharfedale Aura 2. It ranks higher for sound quality than the MoFi SourcePoint 10 and costs less, so the other one has nothing left to offer.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Wharfedale Aura 2 | MoFi SourcePoint 10 | |
|---|---|---|
| Price | $2799 per pair | $3795 per pair |
| Ranked | #13 of 130 in Large Size Bookshelf Speakers | #26 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 30Hz (measured, Erin's Audio Corner) | 38Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 56Hz (measured, Erin's Audio Corner) | 56Hz (measured, Erin's Audio Corner) |
| Dimensions | 22.1"H x 11.3"W x 15.3"D (561.3 x 287 x 388.6 mm) | 22.5"H x 14.5"W x 16.6"D (571.5 x 368.3 x 421.6 mm) |
| Impedance | 6 ohms nominal (3.1 ohms minimum above 80Hz, measured, Erin's Audio Corner) | 8 ohms nominal, 6.4 ohms minimum (measured, Erin's Audio Corner) |
| Drivers | 6.5" Black Glass Fibre Matrix Cone woofer, 4" Black Glass Fibre Matrix Cone midrange, 27x90mm AMT tweeter | 10" Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter |
| Sensitivity | 87dB (measured, Erin's Audio Corner) | 88.2dB (measured, Erin's Audio Corner) |
| Weight | 45 lbs (20.4 kg) each | 46.3 lbs (21.0 kg) each |
| Woofer Cabinet | ported, rear | ported, rear |
| Spinorama Preference Score | 5.19 | 3.25 |
| Spinorama Preference Score with Perfect Sub | 6.81 | 5.27 |
Related Speaker Comparisons
More worthwhile head-to-heads for Wharfedale Aura 2:
- Wharfedale Aura 2 vs Perlisten S4b
- KEF Reference 1 Meta vs Wharfedale Aura 2
- Wharfedale Aura 2 vs GR-Research NX-Studio
- Wharfedale Aura 2 vs March Audio Sointuva AWG
- AsciLab C6B vs Wharfedale Aura 2
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Wharfedale Aura 2: $2799 per pair Crutchfield eBay
Pros: Three-way “mini tower” design with a 27x90mm AMT tweeter, 4” mid-range, and 6.5” midwoofer, using an unusual bottom-firing port. Nearly “ruler flat” on-axis linearity (within about 1.5dB for most of the range) apart from one specific breakup point. Exceptional output capability with very low distortion even at high volume - the reviewer reached about 100dB average at 10 feet with no audible strain, outperforming rivals like the KEF LS50 Meta in multitone distortion above 1kHz. Wide horizontal radiation of about ±70° combined with excellent imaging and pair matching - passed demanding stereo-separation test tracks with precise instrument placement. Bass reaches a genuine 40Hz in most rooms, potentially eliminating the need for a subwoofer for material that doesn’t demand extreme sub-bass. About 20dB of usable dynamic range with no compression issues at 96dB/1m. Considered by the reviewer one of the best speakers he’s tested, potentially challenging his personal all-time top five. Measured bass extension of 56Hz (-3dB), with a measured sensitivity of 87dB.
Cons: A breakup/peak around 13kHz can sound sharp or shrill depending on the track, the main tonal flaw noted. Minor midbase-to-midrange balance discrepancy (about 1dB), most noticeable if the speaker sits more than about 2 feet from the rear wall. Vertical listening window is narrower than typical, a consequence of the AMT ribbon tweeter’s tall physical size - staying within about ±15-20° of the tweeter reference axis (or slightly below it) is important. Impedance dips to about 3.1 ohms with a 1.4-ohm minimum EPDR, meaning a dedicated amplifier is recommended over an AVR due to potential power-supply strain. Distortion rises at the very lowest frequencies (an expected limitation of a 6.5” woofer), and the woofer audibly struggles with extreme 30-35Hz content at high volume. Horizontal directivity narrows from about ±70° to ±50° above roughly 6-7kHz as the ribbon tweeter’s pattern collapses inward.
Full Wharfedale Aura 2 review and specifications →
| Bass Extension (-10dB) | 30Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 56Hz (measured, Erin's Audio Corner) |
| Dimensions | 22.1"H x 11.3"W x 15.3"D (561.3 x 287 x 388.6 mm) |
| Drivers | 6.5" Black Glass Fibre Matrix Cone woofer, 4" Black Glass Fibre Matrix Cone midrange, 27x90mm AMT tweeter |
| Impedance | 6 ohms nominal (3.1 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 87dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 5.19 |
| Spinorama Preference Score with Perfect Sub | 6.81 |
| Weight | 45 lbs (20.4 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Why the Wharfedale AURA 2 Will Blow Your Mind More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Wharfedale Aura 2
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Personal Favorite Speakers Under $2500
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- Wharfedale Aura 2 vs KEF Q Concerto Meta
- Wharfedale Aura 2 vs KEF R3
- Wharfedale Aura 2 vs KEF R3 Meta
- Wharfedale Aura 2 vs Buchardt Audio E50
- Wharfedale Aura 2 vs MoFi SourcePoint 8
- Wharfedale Aura 2 vs Revel M106
- Wharfedale Aura 2 vs Audio First Cadentia 3
- Wharfedale Aura 2 vs AsciLab C6B
- See all 46 comparisons
MoFi SourcePoint 10: $3795 per pair Crutchfield eBay
Pros: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s testing - a genuine “point source” design. Vertical and horizontal radiation patterns closely match each other (about ±50° horizontal, ±30-40° vertical), a hallmark benefit of a well-executed concentric driver. Distortion stays low - under 1% above 100Hz at 86dB, and under 3% up to 100Hz even at 96dB, better than the reviewer expected from a low-excursion waveguide-loaded woofer. Surprisingly strong dynamic capability with little audible compression at both low and high volume. Widely spaced (about 11 feet apart) with roughly 15° of toe-out produced a huge, expansive soundstage without significant loss of imaging precision. Solidly built cabinet (about 40 lbs, heavily braced) minimizes cabinet resonance. Measured bass extension of 56Hz (-3dB), with a measured sensitivity of 88.2dB.
Cons: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate for the 28mm tweeter’s earlier beaming versus a typical 25mm/1” tweeter) combined with a diffraction dip/peak from the waveguide edge; needs about 15° of toe-out to sound neutral, and even then benefits from an extra 1-2dB of treble EQ. Toeing out further (to 30°) flattens the treble further but introduces a dip in the midrange-to-tweeter crossover region - there’s no single toe-out angle that fixes everything at once. F3 of 56Hz and F10 of 38Hz (about 40Hz in-room) mean genuine deep bass is limited; the reviewer would pair it with a sealed 10” or 12” subwoofer for regular daily listening. Bass extension and cabinet placement trade off against midrange cleanliness: placing it close to a wall for more bass risks a wall-bounce suckout in the midrange (roughly 200-500Hz depending on distance). Not perfectly time-aligned between tweeter and woofer (about 0.4ms delta), an inherent limitation of passive coincident drivers versus actively time-corrected designs. Some resonances appear in measurements, likely port-related. Minimum impedance around 6.4 ohms with EPDR near 3 ohms, so the reviewer recommends sticking with a 4-ohm-rated amplifier to be safe.
Full MoFi SourcePoint 10 review and specifications →
| Bass Extension (-10dB) | 38Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 56Hz (measured, Erin's Audio Corner) |
| Dimensions | 22.5"H x 14.5"W x 16.6"D (571.5 x 368.3 x 421.6 mm) |
| Drivers | 10" Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter |
| Impedance | 8 ohms nominal, 6.4 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 88.2dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 3.25 |
| Spinorama Preference Score with Perfect Sub | 5.27 |
| Weight | 46.3 lbs (21.0 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- MoFi SourcePoint 10 vs Radiant Acoustics Clarity 6.2
- MoFi SourcePoint 10 vs Wharfedale Super Linton
- MoFi SourcePoint 10 vs Dynaudio Heritage Special
- MoFi SourcePoint 10 vs Ascend Acoustics CMT-340 SE2
- MoFi SourcePoint 10 vs Arendal 1528 Monitor 8
- MoFi SourcePoint 10 vs Wharfedale Linton 85
- MoFi SourcePoint 10 vs AsciLab F6Bs
- MoFi SourcePoint 10 vs Ascend Acoustics Sierra-LX
- See all 48 comparisons