Westone W10 vs Sennheiser Momentum True Wireless 2

Last updated: October 11, 2026

Short answer: the Westone W10, though neither ranks well in its class. It ranks #435 of 450 in-ear headphones by sound quality, rated 1.8/5, at $199.99; the Sennheiser Momentum True Wireless 2 ranks #441, rated 1.6/5, and costs $243.44, which makes this an easy call rather than a real tradeoff. Both are rated below 3.0/5 among the 450 in-ear headphones, and the Truthear Nova, ranked #2 at $169.99, is a better place to start if sound quality matters.

Westone W10 vs Sennheiser Momentum True Wireless 2

The case for the Westone W10: Its 122 dB SPL/mW sensitivity means a phone drives it to loud levels with no effort, and the cable includes a built-in microphone for calls. The catch: Oratory1990’s measurement shows heavy treble loss, with an 11.5 dB dip near 6 kHz and the air band almost 18 dB below target, so cymbals, string texture and spatial cues are badly muted.

The case for the Sennheiser Momentum True Wireless 2: Active noise cancelling, Bluetooth 5.1 with SBC, AAC and aptX, and an IPX4 rating cover the features commuters and gym users want. The tradeoff: In oratory1990’s measurement the presence region from 3 to 6 kHz is about 9.6 dB below target, with a 10.7 dB dip near 4 kHz, so vocals and instrument attack sound pushed back and hazy.

Buy the Westone W10. It is rated higher for sound quality than the Sennheiser Momentum True Wireless 2 and costs less, which makes it the one to get unless you need something the other one does better.

Looking for alternatives? See the complete Headphones rankings.

Specifications Side By Side

Westone W10 Sennheiser Momentum True Wireless 2
Price$199.99$243.44
Ranked#435 of 450 in In-Ear Headphones#441 of 450 in In-Ear Headphones
Form FactorIn-earIn-ear
BackClosedClosed
Harman Preference Score47 (measured by oratory1990, via AutoEQ)44 (measured by oratory1990, via AutoEQ)
Deviation From Target4.06 dB standard deviation4.39 dB standard deviation
Tonal Tilt-0.45 (negative is warmer, positive brighter)-0.89 (negative is warmer, positive brighter)
Sub-bass ExtensionFalls 6 dB below target at 56 Hz (-8.0 dB at 30 Hz)Within 6 dB of target down to 20 Hz (-4.5 dB at 30 Hz)
ConnectionWiredTrue wireless
Driver TypeBalanced armatureDynamic
Drivers1 x balanced armature1 x 7mm dynamic
Sensitivity122 dB SPL/mW-
Frequency Response20Hz - 16kHz (Manufacturer specified)5Hz - 21kHz (Manufacturer specified)
Built-in MicrophoneYesYes
Weight-0 lbs (6 g) per earbud
Active Noise Cancelling-Yes
Battery Life-7 hours (28 with case, Manufacturer specified)
Bluetooth Version-5.1
Bluetooth Codecs-SBC, AAC, aptX
IP Rating-IPX4

How Westone W10 compares with other leading options:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Headphones In Full

Westone W10: $199.99 Amazon eBay

Westone W10 ranking card

Pros: Its 122 dB SPL/mW sensitivity means a phone drives it to loud levels with no effort, and the cable includes a built-in microphone for calls. The single balanced armature design suits listeners who want a dark, laid-back sound with no treble glare.

Cons: Oratory1990’s measurement shows heavy treble loss, with an 11.5 dB dip near 6 kHz and the air band almost 18 dB below target, so cymbals, string texture and spatial cues are badly muted. Sub-bass falls 6 dB short by 56 Hz, leaving little low end rumble. The cheaper Etymotic ER3SE and KZ ASX both rate higher.

ReleasedOct 2013 (13 years ago)
BackClosed
Built-in MicrophoneYes
ConnectionWired
Deviation From Target4.06 dB standard deviation
Driver TypeBalanced armature
Drivers1 x balanced armature
Form FactorIn-ear
Frequency Response20Hz - 16kHz (Manufacturer specified)
Harman Preference Score47 (measured by oratory1990, via AutoEQ)
Sensitivity122 dB SPL/mW
Sub-bass ExtensionFalls 6 dB below target at 56 Hz (-8.0 dB at 30 Hz)
Tonal Tilt-0.45 (negative is warmer, positive brighter)
EQ preset to match the Harman target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+4.1 dB0.70
Peak237 Hz-4.0 dB0.18
Peak5,987 Hz+5.9 dB0.63
Peak2,493 Hz+2.9 dB2.11
Peak59 Hz+1.7 dB0.82
High shelf10,000 Hz+5.6 dB0.70
Peak8,139 Hz-2.8 dB3.70
Peak713 Hz+0.7 dB1.13
Peak1,201 Hz-1.0 dB2.41
Peak237 Hz-0.4 dB1.54

Sennheiser Momentum True Wireless 2: $243.44 TWS Amazon eBay

Sennheiser Momentum True Wireless 2 ranking card

Pros: Active noise cancelling, Bluetooth 5.1 with SBC, AAC and aptX, and an IPX4 rating cover the features commuters and gym users want. Battery life is rated at 7 hours per charge and 28 with the case, and each earbud weighs only 6 g. Bass is lifted by about 3.1 dB over target, which suits listeners who want a warm, punchy sound.

Cons: In oratory1990’s measurement the presence region from 3 to 6 kHz is about 9.6 dB below target, with a 10.7 dB dip near 4 kHz, so vocals and instrument attack sound pushed back and hazy. A 5.2 dB peak near 10.8 kHz and boosted air then add an uneven sparkle on top, and sub-bass is down 2.3 dB. The preference score of 44 is low, and the rating sits below the Jabra Elite Active 65t.

ReleasedApr 2020 (6 years ago)
Active Noise CancellingYes
BackClosed
Battery Life7 hours (28 with case, Manufacturer specified)
Bluetooth CodecsSBC, AAC, aptX
Bluetooth Version5.1
Built-in MicrophoneYes
ConnectionTrue wireless
Deviation From Target4.39 dB standard deviation
Driver TypeDynamic
Drivers1 x 7mm dynamic
Form FactorIn-ear
Frequency Response5Hz - 21kHz (Manufacturer specified)
Harman Preference Score44 (measured by oratory1990, via AutoEQ)
IP RatingIPX4
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-4.5 dB at 30 Hz)
Tonal Tilt-0.89 (negative is warmer, positive brighter)
Weight0 lbs (6 g) per earbud
EQ preset to match the Harman target

Set a preamp of -7.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+6.4 dB0.70
Peak85 Hz-6.9 dB0.26
Peak3,202 Hz+6.5 dB1.25
Peak1,638 Hz-1.6 dB2.70
Peak5,340 Hz+4.9 dB3.93
High shelf10,000 Hz-3.3 dB0.70
Peak736 Hz+1.0 dB1.92
Peak334 Hz-0.6 dB2.45
Peak4,354 Hz+1.0 dB4.95
Peak199 Hz-0.5 dB3.18