Short answer: the Truthear x Crinacle Zero RED. It ranks #3 of 68 in-ear headphones by sound quality, rated 4.9/5, at $64.99; the Tin HiFi T4 ranks #24, rated 3.9/5, and costs $89, so there is little reason to consider the other one.
The Truthear x Crinacle Zero RED is the better-sounding option. A Harman score of 86 at an entry-level price delivers a well-balanced response with a smooth 1.1 dB deviation. Watch for: Presence from 3 to 6 kHz sits about 2.2 dB below target, so vocals and snare attack can sound a little recessed.
Why pick the Tin HiFi T4: A preference score of 73 in crinacle’s measurement puts the response well within the range most listeners find pleasing, with a nearly neutral tilt. The tradeoff: The score still leaves room for audible deviations from the target, so some tonal coloration is likely.
Buy the Truthear x Crinacle Zero RED. It is rated higher for sound quality than the Tin HiFi T4 and costs less, so only choose the other one for a particular feature it does better.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| Truthear x Crinacle Zero RED | Tin HiFi T4 | |
|---|---|---|
| Price | $64.99 | $89.00 |
| Ranked | #3 of 68 in In-Ear Headphones | #24 of 68 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 86 (measured by oratory1990, via AutoEQ) | 73 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 1.10 dB standard deviation | 2.44 dB standard deviation |
| Tonal Tilt | -0.08 (negative is warmer, positive brighter) | +0.10 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm + 1 x 7.8mm dynamic | 1 x 10mm dynamic |
| Impedance | 17.5 ohms | 32 ohms |
| Sensitivity | 117.5 dB/Vrms | 102 dB |
| Frequency Response | 20Hz - 40.5kHz (Manufacturer specified) | 10Hz - 20kHz (Manufacturer specified) |
| Back | Closed | Closed |
Related Headphone Comparisons
More worthwhile head-to-heads for Truthear x Crinacle Zero RED:
- Truthear x Crinacle Zero RED vs 7Hz Salnotes Zero
- Truthear x Crinacle Zero RED vs Tin HiFi T3 Plus
- 7Hz x Crinacle Zero 2 vs KZ ZSN Pro
- KZ ZSN Pro X vs KZ ZSN Pro
- 7Hz Salnotes Zero vs KZ ZSN Pro X
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Truthear x Crinacle Zero RED: $64.99 Amazon eBay
Pros: A Harman score of 86 at an entry-level price delivers a well-balanced response with a smooth 1.1 dB deviation. Bass and mids track the target closely, and the dual dynamic driver design runs easily from a phone at 17.5 ohms and 117.5 dB per volt. It outscores the Tin HiFi T3 Plus by a clear rating margin at a similar cost. It is a good fit for listeners who like a warm, bass-forward sound.
Cons: Presence from 3 to 6 kHz sits about 2.2 dB below target, so vocals and snare attack can sound a little recessed. A 3.9 dB dip near 10.3 kHz and sub-bass about 1.4 dB light mean cymbals lack some shimmer and the deepest bass has less rumble. It is wired only with no mic or remote listed.
Full Truthear x Crinacle Zero RED review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.10 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm + 1 x 7.8mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40.5kHz (Manufacturer specified) |
| Harman Preference Score | 86 (measured by oratory1990, via AutoEQ) |
| Impedance | 17.5 ohms |
| Sensitivity | 117.5 dB/Vrms |
| Tonal Tilt | -0.08 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -2.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.5 dB | 0.70 |
| Peak | 6,163 Hz | +2.2 dB | 2.44 |
| Peak | 341 Hz | -1.0 dB | 1.46 |
| Peak | 70 Hz | +1.0 dB | 0.61 |
| Peak | 1,284 Hz | -0.6 dB | 2.04 |
| High shelf | 10,000 Hz | -1.8 dB | 0.70 |
| Peak | 2,432 Hz | +0.7 dB | 2.98 |
| Peak | 3,588 Hz | -0.6 dB | 3.06 |
| Peak | 8,541 Hz | +1.1 dB | 3.84 |
| Peak | 769 Hz | +0.2 dB | 3.01 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Tin HiFi T4: $89.00 Amazon eBay
Pros: A preference score of 73 in crinacle’s measurement puts the response well within the range most listeners find pleasing, with a nearly neutral tilt. A single 10mm dynamic driver at 32 ohms and 102 dB is easy to power from a phone or dongle, and it rates a little higher than the KZ ZAX at a similar level of price.
Cons: The score still leaves room for audible deviations from the target, so some tonal coloration is likely. A single dynamic driver also gives up the added detail that multi-driver sets in this class aim for.
Full Tin HiFi T4 review and specifications →
| Released | Nov 2019 (6 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.44 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 73 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 102 dB |
| Tonal Tilt | +0.10 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.8 dB | 0.70 |
| Peak | 9,358 Hz | +4.2 dB | 2.59 |
| Peak | 149 Hz | -2.1 dB | 0.84 |
| Peak | 1,877 Hz | -3.4 dB | 2.54 |
| Peak | 3,450 Hz | +4.1 dB | 3.07 |
| High shelf | 10,000 Hz | -0.1 dB | 0.70 |
| Peak | 853 Hz | +1.7 dB | 1.24 |
| Peak | 5,343 Hz | -3.7 dB | 5.41 |
| Peak | 1,332 Hz | -1.5 dB | 2.76 |
| Peak | 6,775 Hz | +1.3 dB | 3.54 |
- Reviews, Comparisons and Sound Samples


