Short answer: the ThieAudio V16 Divinity. It ranks #301 of 450 in-ear headphones by sound quality, rated 3.9/5, at $1,499. The SeeAudio Kaguya ranks #347, rated 3.6/5, at $1,399, $100 cheaper, not enough of a saving to outweigh the sound-quality gap.
What the ThieAudio V16 Divinity does well: Crinacle’s measurement gives it a preference score of 72, and across six hobbyist measurements on squig.link the bass sits only about 1 dB above target with sub-bass nearly flat down to 20 Hz, so low notes are full without swamping the mids. The tradeoff: The presence region from 3 to 6 kHz sits about 4 dB low, with a dip of roughly 8 dB near 4.6 kHz, which pushes vocals and guitars back and can make the sound feel distant.
What the SeeAudio Kaguya does well: A preference score of 69 from crinacle and a 2.2 dB standard deviation give it a fairly even response for a premium hybrid. Watch for: A 10.8 dB peak near 10 kHz in squig.link measurements can make cymbals and hi-hats sound glassy or hissy to treble-sensitive listeners.
Buy the ThieAudio V16 Divinity. It is rated higher for sound quality, and saving $100 with the SeeAudio Kaguya does not make up for the sound-quality gap.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| ThieAudio V16 Divinity | SeeAudio Kaguya | |
|---|---|---|
| Price | $1,499.00 | $1,399.00 |
| Ranked | #301 of 450 in In-Ear Headphones | #347 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 72 (measured by crinacle, via AutoEQ) | 69 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 2.16 dB standard deviation | 2.22 dB standard deviation |
| Tonal Tilt | -0.63 (negative is warmer, positive brighter) | -0.56 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.2 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+1.3 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Balanced armature | Hybrid (4 balanced armature + 4 electrostatic) |
| Drivers | 16 x balanced armature | 4 x balanced armature + 4 x electrostatic |
| Impedance | 18 ohms | 28 ohms |
| Sensitivity | 112 dB | 103 dB/mW |
| Built-in Microphone | No | No |
| Frequency Response | - | 20Hz - 40kHz (Manufacturer specified) |
Related Headphone Comparisons
More worthwhile head-to-heads for ThieAudio V16 Divinity:
- Noble Audio Kadence vs ThieAudio V16 Divinity
- 64 Audio U4s vs ThieAudio V16 Divinity
- ThieAudio V16 Divinity vs Symphonium Crimson
- Symphonium Crimson vs SeeAudio Kaguya
- SeeAudio Kaguya vs Unique Melody MEST Mk2
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
ThieAudio V16 Divinity: $1,499.00 Linsoul eBay
Pros: Crinacle’s measurement gives it a preference score of 72, and across six hobbyist measurements on squig.link the bass sits only about 1 dB above target with sub-bass nearly flat down to 20 Hz, so low notes are full without swamping the mids. Air above 10 kHz is lifted about 3 dB, adding sparkle and openness to cymbals and strings. Its 16 balanced armatures run at 18 ohms and 112 dB sensitivity, so a phone drives it with plenty of headroom.
Cons: The presence region from 3 to 6 kHz sits about 4 dB low, with a dip of roughly 8 dB near 4.6 kHz, which pushes vocals and guitars back and can make the sound feel distant. It shares its rating with the Unique Melody MEXT, which costs less.
Full ThieAudio V16 Divinity review and specifications →
| Released | Oct 2021 (5 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.16 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 16 x balanced armature |
| Form Factor | In-ear |
| Harman Preference Score | 72 (measured by crinacle, via AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 112 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.2 dB at 30 Hz) |
| Tonal Tilt | -0.63 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.5 dB | 0.70 |
| Peak | 134 Hz | -2.4 dB | 1.09 |
| Peak | 4,496 Hz | +4.3 dB | 4.50 |
| Peak | 7,057 Hz | +4.3 dB | 1.60 |
| Peak | 1,813 Hz | -2.0 dB | 1.32 |
| High shelf | 10,000 Hz | -2.9 dB | 0.70 |
| Peak | 932 Hz | +0.9 dB | 2.70 |
| Peak | 1,329 Hz | -0.6 dB | 3.30 |
| Peak | 6,311 Hz | +1.7 dB | 5.93 |
| Peak | 5,544 Hz | -1.2 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
SeeAudio Kaguya: $1,399.00 Linsoul eBay
Pros: A preference score of 69 from crinacle and a 2.2 dB standard deviation give it a fairly even response for a premium hybrid. Bass sits about 2 dB above target with sub-bass near neutral all the way to 20 Hz, so low notes are full without bloat. Four electrostatic tweeters add a 7.4 dB lift in the 10 to 16 kHz air region for an open, airy top end. It rates higher than both the SeeAudio Neo and the DUNU Zen Pro.
Cons: A 10.8 dB peak near 10 kHz in squig.link measurements can make cymbals and hi-hats sound glassy or hissy to treble-sensitive listeners. A 4.6 dB dip near 6 kHz slightly softens vocal consonants. The SoftEars Twilight rates higher for considerably less money.
Full SeeAudio Kaguya review and specifications →
| Released | Jan 2021 (5 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.22 dB standard deviation |
| Driver Type | Hybrid (4 balanced armature + 4 electrostatic) |
| Drivers | 4 x balanced armature + 4 x electrostatic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 69 (measured by crinacle, via AutoEQ) |
| Impedance | 28 ohms |
| Sensitivity | 103 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.3 dB at 30 Hz) |
| Tonal Tilt | -0.56 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.7 dB | 0.70 |
| Peak | 831 Hz | +4.2 dB | 0.74 |
| Peak | 166 Hz | -2.6 dB | 1.02 |
| Peak | 5,983 Hz | +6.4 dB | 3.01 |
| Peak | 1,483 Hz | -4.3 dB | 1.10 |
| High shelf | 10,000 Hz | -4.6 dB | 0.70 |
| Peak | 4,008 Hz | -0.9 dB | 5.06 |
| Peak | 65 Hz | +0.3 dB | 2.22 |
| Peak | 6,624 Hz | +1.1 dB | 5.93 |
| Peak | 8,597 Hz | +1.5 dB | 5.55 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons